View The Full Version : Version 2014
Guys but for the first release version 2014 not c'? still care?
magi1984
15-07-2014, 09:08
no why? the original was put on a beautiful usb stick as protection, therefore at the moment there is nothing
rodcraft86
20-07-2014, 14:58
the network says that by updating the firmware modificat on purpose, and installing the version 2014.1, everything works
flamingsn3Ak3r
22-07-2014, 15:40
Hi I wanted to know, but that substantial differences there are between:
-Autocom
-Digiprog
-Delphi
-Multiecuscan
as are all of the diagnosiche, but what ? the one that works best?
Greetings!
leandro89
22-07-2014, 17:39
Hi I wanted to know, but that substantial differences there are between:
-Autocom
-Digiprog
-Delphi
-Multiecuscan
as are all of the diagnosiche, but what ? the one that works best?
Greetings!
with regard to multiecuscan you have a car park good for fiat alfa lancia, while for autocom you have a car park full, the costs are different, it depends on what you want to do
flamingsn3Ak3r
22-07-2014, 17:50
I wanted to do a complete diagnosis of all the cars for? I didn't want to buy, say, a duplication of effort
Autocome and delphi ? the same thing, multiscan only fiat lancia alfa x what they cost, you should take them all, please contact the shop team will advise you.
flamingsn3Ak3r
22-07-2014, 19:34
but not 'c'? just no difference? why? I can't explain
rodcraft86
22-07-2014, 20:29
to ****l got potential? they are almost identical, autocom makes almost all vehicles in the business while multiecuscan is only fiat - lancia - alfa, but in a way the most? specific say, it enables you to perform the alignment proxy, what that autocom does not do, for what they cost I recommend them both
flamingsn3Ak3r
23-07-2014, 10:32
Apart from the alignment to the mutiecuscan (very important in case of replacement, instrumentation)
the reset (not the DTC or the light the MIL) but the real "reset adaptation" can do both (Delphi/Autocom and Multiecuscan/***********)?
ES: reset TPS, etc.
For? the thing that I wanted to know ? if the Delphi and Autocom are the same in all and for all
why? I do not explain these two versions, which in their turn are divided into various updates,
from what I understand the first one ? the one that works best.
Greetings.
rodcraft86
23-07-2014, 22:24
I can tell you that autocom and delphi have the same potential? but it seems that delphi is pi? up to date, and with something more?, I've noticed differences except for the graphics
flamingsn3Ak3r
24-07-2014, 11:36
for your personal experience, what are the things should do in the pi? the delphi?
rodcraft86
24-07-2014, 17:18
I repeat, from my experience are the same
alfonsoh
24-07-2014, 18:28
autocom and delphi are the same, while wow can you? use conl the same interface has a little more.
the interfaces after 2014 have protection, I think you are talking about those of 3-2013?
flamingsn3Ak3r
24-07-2014, 18:54
well let's just say that it speaks of those working and personally
I don't know which version :\
rodcraft86
24-07-2014, 19:32
now those poor there are no more?, also, the clones work well, especially the latest versions in short there will be? the 2014.1 for them
alfonsoh
24-07-2014, 20:48
I doubt that there will be? in short, the new version if I'm not mistaken he needs in addition to registration, a stick, and has a new protection system is complex enough that it requires deep studies. if someone thinks that it will be worth? worth it definitely will make new copies, but I don't think that will be? in the short term.
I doubt that there will be? in short, the new version if I'm not mistaken he needs in addition to registration, a stick, and has a new protection system is complex enough that it requires deep studies. if someone thinks that it will be worth? worth it definitely will make new copies, but I don't think that will be? in the short term.
In fact, from what I understand c'? need a usb stick! This key must be used to activate the software and must be present on the pc even while doing the diagnosis !!
flamingsn3Ak3r
25-07-2014, 10:12
I assume that will be the type with an emulator USB
for? I alfonsoh, now, according to me, the copies
they all work well, why? now ? gi? a bit' that we are studying on
rodcraft86
25-07-2014, 17:13
? a sort of dongle like the one that had the galletto v53, now obsolete and replaced, what will happen? also for the diagnosis
matteo87
28-08-2014, 17:40
There are new? around! I have heard that c'? gi? version 2014.1 working for the clones.
rodcraft86
28-08-2014, 17:56
unfortunately, I still don't know anything about
matteo87
28-08-2014, 17:58
They told me that soon we will have the 2014.1, however, if you are looking for a good on ****** c'? gi? who sells the new autocom 2014.1
alfonsoh
28-08-2014, 18:03
it works with the old interface?
matteo87
28-08-2014, 18:06
This I do not know! I don't know anything yet,? I have seen with my own eyes that c'? gi? people who sell the 2014.1! then that is a hoax or not can you? know!
This I do not know! I don't know anything yet,? I have seen with my own eyes that c'? gi? people who sell the 2014.1! then that is a hoax or not can you? know!
By a lot I'm doing research on the web to search for the version 2014.1 working and as of today I have not yet been found. Among those that I have seen, and who say they sell the 2014.1, at the end, in the specifications, they say that they provide the Sw2013.3; then ? just a way to attract customers and try to sell it !!
alfonsoh
04-09-2014, 13:23
the version 2014 refers to a new interface clone with software 2013-3 unlike the old interface, the new one also makes truck.
blackwolf76
05-09-2014, 01:35
the version 2014 refers to a new interface clone with software 2013-3 unlike the old interface, the new one also makes truck.
Also the old woman took the truck... the new 2014 has the different layers.
alfonsoh
05-09-2014, 09:19
I have delphi-autocom the second to the last interface, the one before this new one, my truck is, perhaps, dipender? from the software, or activation.
I don't understand why? they have changed the form if they have changed something in the hardware or firmware.....
perhaps they are working to update the new interface with the new software?
Probably will be? upgradeable at a later time or just a way to sell a interface now passed?
blackwolf76
05-09-2014, 14:59
The truck works on all, you have to use the soft-specific. Are the cables and adapters that are worth it and you can't get to work on these vehicles. The interfaces are all the same, the only change between the Cdp and Cdp+
matteo87
08-09-2014, 15:16
I have delphi-autocom the second to the last interface, the one before this new one, my truck is, perhaps, dipender? from the software, or activation.
I don't understand why? they have changed the form if they have changed something in the hardware or firmware.....
perhaps they are working to update the new interface with the new software?
Probably will be? upgradeable at a later time or just a way to sell a interface now passed?
When you do the installation you have to put in the place of a-710-142 the code for the trucks, you'll see that for magic shalt thou make them, too! as it says alfonso unfortunately for? adapters make this worth it and are not able to enter the diagnosis on some models
By a lot I'm doing research on the web to search for the version 2014.1 working and as of today I have not yet been found. Among those that I have seen, and who say they sell the 2014.1, at the end, in the specifications, they say that they provide the Sw2013.3; then ? just a way to attract customers and try to sell it !!
Pi? later I try to contact the seller by phone to ask him a few questions. That surely ? as you say, but I want to be sure.
I called the seller, this idiot on the site writes autocom 2014.1 (no 2013.3). in the end I did explain it well! there has tried in all ways to work around the issue, virtually damage the new interface with the 2013.3, 2014 still have to craccarlo according to him! As it says in an "vatte to trust, I know boni all mettece na written on a sign, I know boni all!". sorry for the false good news!
It was also released version 2014.2 of the software ! I'm continuing to look.... but nothing there? still no patch around !
Toretto70
06-01-2015, 10:56
if you are interested I have link where to download the version 2014 r2 with all the activations I have already? tried it on my pc and it works
sportknight
06-01-2015, 12:54
obvious that we are interested,I have found the 2014.1 just yesterday afternoon
Toretto70
06-01-2015, 14:04
ok I attach a link with a single pass and user interface for *****
obvious that we are interested,I have found the 2014.1 just yesterday afternoon
pass sent you tip to use the jdownloader program so if you need to, by pure chance, stop the download and then resume it easily...
cinqueturbo
07-01-2015, 16:40
You give me the confirmation that it is not necessary to uninstall the 2013 version?
Then for those who is using it.. There are improvements or are there only drive more? new?
Thanks and sorry for the intrusion..
I can confirm that it's not necessary to uninstall 2013, in fact I both work on the same system.
Alessio93
07-01-2015, 18:15
you can have the pass ? thanks:)
Toretto70
07-01-2015, 21:55
Hello I have uninstalled the old version and use only the version of the pi? new, then if you want to use them both, and will work equally do as well.
matteo87
08-01-2015, 17:14
Hello I have uninstalled the old version and use only the version of the pi? new, then if you want to use them both, and will work equally do as well.
I have overwritten the old installation! the program starts, it remains only to try with the interface.
Hi to all,
excuse me, could I have the link for the version 2014 r2?
Thank you so much in advance.
hftdelta
28-01-2015, 09:36
hello toretto70 unfortunately I still have no permissions to download, could you send me the link via ****? ########## thanks
msport (exil77grande)
28-01-2015, 10:59
hello toretto70 unfortunately I still have no permissions to download, could you send me the link via ****? ########## thanks
as you can see, and as I have also written via ***** your account is automatically enabled to download but this does not authorise you to go against the rules asking for material present in the forum via *****,I would like to ask more attention.
msport (exil77grande)
28-01-2015, 11:08
ok I attach a link with a single pass and user interface for *****
toretto kindly when you post something on the forum or is it asking the permission via ***** to the us admin or post to provide the pass to us,look in to the attachment without pass away ***** then I'll fix it.
hftdelta
28-01-2015, 11:14
excuse not to? more,promised ;)
msport (exil77grande)
28-01-2015, 11:14
Hi to all,
excuse me, could I have the link for the version 2014 r2?
Thank you so much in advance.
maybe if the first steps in the section presentations and take a look at the regulation would be appreciated.
It also works with the old cdp.
if you do not yet have the chance? of download ? possible to have the link thanks
msport (exil77grande)
28-01-2015, 12:19
It also works with the old cdp.
if you do not yet have the chance? of download ? possible to have the link thanks
did you read above?
have you read the rules?
Yes I read the question was if it worked with the cdp?
I apologize for the misunderstanding happened
iksan1980
24-03-2015, 20:47
at the level of the potentials are almost identical, autocom needle, almost all the vehicles in the business while multiecuscan is only fiat - lancia - alfa, but in a more specific way to say, you can perform the alignment proxy, which autocom does not, for what they cost, I advise you to take them both
matteo87
11-05-2015, 12:40
Guys, does anyone know of the existence of a new version?? or are we still stuck with the 2014.1-turned-2014.2.2?
hftdelta
11-05-2015, 13:11
you me is you
matteo87
12-05-2015, 13:04
you me is you
Cio?? What version are we there yet??
also of interest to me .... I would like to update the autocom
The last and 2014.3, or you can use wurt wow.
I downloaded the 2014.3 and installed, but it is around the keygen! someone has it?
I even thought to buy it, we want to do a group purchase?
the crack is there and how, but they keep it tight and sellers of the clones..
up to 2014.2 is crackabile quietly..
I can't seem to get recognized via usb the delphi to autocom..
can you tell me how the heck can I?
in the installation I put the sn correct and I generated the key which I activated and now in the "hardware" I detect something on com4 but how do I identify told me that there is nothing to be found..
where am I wrong?
the crack is there and how, but they keep it tight and sellers of the clones..
up to 2014.2 is crackabile quietly..
I can't seem to get recognized via usb the delphi to autocom..
can you tell me how the heck can I?
in the installation I put the sn correct and I generated the key which I activated and now in the "hardware" I detect something on com4 but how do I identify told me that there is nothing to be found..
where am I wrong?
the problem is in the drivers, you should install the drivers of delphi, who for some reason are different from the stay of the autocom!
the problem is in the drivers, you should install the drivers of delphi, who for some reason are different from the stay of the autocom!
Cioa Matthew,
thanks for the info.. after hours of churning between regedit and device manager I was able to uninstall the current driver and plug the usb it tells me "FINALLY" unknown device.
Having available the delphi 100251 clone and wanting to put the sw 2014.2 or 2014.3, which driver should I install?
hello and good morning to all I would like to know if you can find the wiring diagram de delphi 100251 (ds 150), or that component goes to the point c404 because in my one and unsoldered the component I can not understand it thanks in advance
Delphi working finally.
Corry, the C should be a capacitor. Search on ****** PCB delphi and see the images
I'm the site has filters exaggerated and asterisca too.. I Wanted to say gUgle
Thank you very let you know
Nothing I can find that capacitor and mounted
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.