edc 16c39

[patrik2]

Hello .. I extracted the file to my spear .. and then ??

not s? where to put hands ..

reading on the forum I downloaded ECM2001 6.3 ..

Not c'? the drive even if it has 9700 drive ( says ) ..

I read on some forum that you can? create the drive from the file ..

Can you help me ?? Consider that in the maps are zero.

? my car I would like to do it alone as for the mechanics, even if c? I think

little .. thanks

[msport (exil77grande)]

hello,from where you have downloaded the ecm?
with regard to the map if you do a draft reading the various posts and the posts with the file gold we will be happy to help you with advice but if you don't have the sriver you must do in 2d, if you own you can not you can contact the service files on-line forum.

[patrik2]

Good morning .. I am attaching the file cos? you can check if it ? extracted in the correct way .. I extracted the file with Eobd 1260 purchased a few ? on ebay .. read said bosch edc16 c 39 .. total play time of 1 hour and 20 minutes continuous ? and I saved the file .. ? a new launches (2010) I've read on this forum that ? preferable to use ECM2001 6.3 ..
cos? I searched the net and installed it ..? the drive ( c39.509 ) is not c'? ..I also read on some forums that ? can create the drive, starting from the original file .. If I open without drive-in graphics I don't know where to start ..Even with the drive, I don't know where to start from ..
I am attaching the original file and the modified one from the programs that close the egr and remove the fat ..
C'? a guide to understand how to move or c'? another soft + easy to use ??
Thanks ..

[ecuboost]

the guides there are several around, but I doubt that you will understand? something, I recommend that you download the map already? made of some other car and studies the changes, to start, I'm doing cos?, I also with the purpose of making a edc16c39

[ecuboost]

egr closed it looks like a closed well, the fap does not seem to me, to? I'm not sure, but if you specify the model of the lance, perhaps you'll be making more? easy aid, and possibly there will be? also the driver

[patrik2]

Msport !! Sorry not seen it before .. I tried the ecm with ****** as you f? usually to find other sof I also found winols but ? English .. delta 1600 cc 120 ps jtd .. this car ? import .. where can I find a map already made for a 1600 that is similar ? what do you advise me to begin to see the ecm or other sof + easy ?? Thanks .. Good lunch ..

[ecuboost]

use the search function, see what you find, you can also start from another edc16c39 not 1.6, so the ecm to start ? good, of course without driver complicates everything, try to find ecm titanium 1.61 download it from here, you have to be said, I have downloaded it elsewhere,for? I am not able to find the key if you find it, we can exchange the material

[patrik2]

Hello ... sometimes the bad luck helps .. trying titanium 1.61 I found a nice trojam that but half planted on the pc .. but on that site I also found the soft with the codes to activate ..? ? to try might be na only ... I try, and then you f? know .. if it worked can you tell me if c'? gi? a guide ?? hello ..

[ecuboost]

I have one if you want I will send it to you, you could give me the soft codes for activation?

[patrik2]

the activation codes are the name and pass ?? it doesn't work ? on a different machine .. it Says that the machine has a different id ..

[ecuboost]

the soft you should give it a .reg file.key in exchange for the machine id, which of course changes with each pc

[patrik2]

the file regkey.dat c'? .. as the edited to edit it ?

[virus1976]

hello patrik, you may indicate in num sw and hw?

[ecuboost]

the file regkey.dat c'? .. as the edited to edit it ?

no no, you need the program which created the file, you can edit with notepads no, but you understand nothing, according to me is a generator where you can enter machine id and returns the reg.dat

[patrik2]

In fact, I tried to edit a if he understands nada .. crack short .. I saw something, but in Russian .. I try to see meio .. you're still with the same prob ??


The Virus .. it is located in the network, all looking with calm .. I found today ..

[ecuboost]

you are stationary too...all say they have found the keygen but I ? days that I try but I can't find it

[giarras]

meanwhile, the boys avoid with these words... if you wait a while maybe you'll have one of the forum ok?

[patrik2]

Good evening Giarras .. sorry we left off topic without realizing it ..

Andrea, but with ecm 2001 that work for me you know where to start ?? the drive lai found ?? I've read that you can? generate starting from the same file .. but how to know is do you know ?? in the meantime, I found the guide for the ecm .. I have to see if he is speaking of the drive ..

Giarras please take a look at my files are correct ?? thanks

[ecuboost]

ke I know the driver, you can create, in practice, recognizing the curves area as bookmarks, in order to find the addresses the next time, but the problem ? recognize the curves

[patrik2]

Here we are arrived c'? a video on you tube that shows some steps but not all .. try to look for maybe you can see it better de me .. my adsl ? to the pedals :P ..

[patrik2]

No one quardato my files over to andrea ??

[giarras]

No one quardato my files over to andrea ??

this evening and a bit late tomorrow, let's see.

[patrik2]

Thanks giarras .. night ..

[mavaila1972]

Msport !! Sorry not seen it before .. I tried the ecm with ****** as you f? usually to find other sof I also found winols but ? English .. delta 1600 cc 120 ps jtd .. this car ? import .. where can I find a map already made for a 1600 that is similar ? what do you advise me to begin to see the ecm or other sof + easy ?? Thanks .. Good lunch ..

download the file in the forum of the bravo 120 hp and begins to watch it then we'll talk

[patrik2]

I can download ..

Your user account may not have sufficient privileges to access this page.

I can not even download my file by mistake I have deleted it from the pc ..

[patrik2]

Good evening . Andrea did you solved that problem ??
strangely I found on the net a file partially modified, which may be good on my .. someone tells me if it could go well or ? you can throw away ?? thanks ..

[ecuboost]

for the ecm you say? no

[patrik2]

hello .. someone has looked at my file ? I believe that the fap does not ? removed .. not sure .. can you confirm ?
thanks ..

[magi1984]

do not load the map that you have found on the net is that ? better
apart from the injection times that are, in my opinion, could be improved but still are good, the rest ? wrong
the rail pressure ? been increased to 120 bar, at certain points,bringing it from 1600 to 1728bar... the turbo not to talk about, all of which is completely wrong, torque limiters increased by 40%, it seems to me an exaggeration

your file without fap with what you did?
manual or with any software?

[patrik2]

Ulla l? .. here is the death sentence to the turbine .. This file ? a myth I asked the guy who posted the file as it goes let's see what she says .. The no fap made with the soft echo that is on the network .. ? removed good or not ?? They say that the cracked works bad ..
In this file, found in the network, the fap ? present or removed ??

I can't find the drive .. can you help me ?? thanks ..

[magi1984]

if the file without fap have you done it with ecusafe upload it that works.
ecusafe is evil in many things, but the edc16c39 the f?
for the driver I can't help you why? I don't use ecm2001 but I use ecm titanium, and the drivers are different

if you want a map for my council ? you're in the clear in the network, ecm titanium 1.61, and start your map with that.
definitely put them on the driver you

then you check us :)

[patrik2]

Thanks magi , and titanium 1.61 the found and downloaded but I get the wrong id and not knowing how to fix I wanted to try with ecm 6.3 .. this is the drive that is missing leads me out of the way .. I tried to create the drive but gives me an error sign that the drive ? created evil ..
the file you are done with ecusafe but I'm not sure you've checked .. thanks ..

[magi1984]

not c'? need to control it,I can tell you from experience, files made with cusafe on edc16c39 fiat group's work.
ecm titanium if asking for the ID ? a wrong version.in the network there are versions that do not require any id, and depart without problems

[patrik2]

Thanks, I will try to see if I can find the soft working ..

[magi1984]

tomorrow I have to do a stilo 1.9 120 horses, as soon as I made you place the file ori and mod cos? can you give us a eye

[patrik2]

Thanks a lot dear .. I would also be useful in the drive for? .. no not if understand nothing ..

[magi1984]

aridaie....searched with version 1.61 that you are set

[patrik2]

I downloaded 4 .. it funzionase !!! beginning to think? that depends on the pc .. but does not harm to try ..

[patrik2]

Hi I have replaced the fap with the straight tube. not having had time to study the maps and the like, I have uploaded the original file without the dpf and egr closed . When you start writing the framework, instruments, sounds, and gives me the warning " error, esp does not present " sounds 2 times, but I don't remember + the second message .
I turned on seems to have the minimum + lower than before, or ? my impression at the time . Then I tried the file found on the net ,even with this when you start writing the framework, instruments, sounds, and gives me 2 errors . but c'? a strange noise from the exhaust like a vibration that I did not understand where it comes from . then I put the original file is modified without fap and with the egr closed the one before it . I have always the same errors from the instrument panel . ? a normal thing that is giving me these errors ?? not being certain I did not go out to try the car with the vibration I felt with the modified file, now I do not feel . Thanks .

[magi1984]

you ? normal writing of those errors. In my bmw when he writes I get the light on the service and the yellow triangle of danger

[patrik2]

ok thanks I try the car on the road ..

[sa80libero]

you ecusafe works on these ecu, super tested....

[patrik2]

the car is fine, and honestly I don't find much difference between the original file without the fat with the egr closed and the one found on the net .. I feel only that strange vibration ( in a sort of hiss ) from the exhaust .. as if the turbine is started immediately turn ..

[msport (exil77grande)]

the car is fine, and honestly I don't find much difference between the original file without the fat with the egr closed and the one found on the net .. I feel only that strange vibration ( in a sort of hiss ) from the exhaust .. as if the turbine is started immediately turn ..

then as already said by colleagues all are completely errors during the reading/writing are normal,with regard to the files found on the net but how can you trust something that you don't know? at least post ori and mod here and we'll give you some advice then, if you think good, give it a try, but do so without any opinion and crazy.

[magi1984]

he had put a couple of pages back and I commented myself. That file, apart from a couple of maps that are decent, in my opinion ? redo it why? not ? good

[patrik2]

good afternoon ..? a couple of pages behind the ori and the one found on the net .. I can now confirm that the hiss ? the turbo starts to spin as soon as I put in the bike .. should not stand still and that's it? start to turn 900 / 1000 rpm ?? I put the gold there? not much difference in yield between the 2 files .. the proven only in recovery, not in extension but the extension is not of interest to me I have to run I need the recovery for the hills ..

[msport (exil77grande)]

I repeat what I have already said not to take the risk to turn with the maps found on the web were not known by whom.

[patrik2]

it is ok but buttace an eye specialist as soon as you can , see if for the turbo ? normal start from the beginning or not ?? .. this file also has a drive busted perhaps but ? the only drive that I have found ..

[magi1984]

I'm not msport and I don't have the experience but I repeat what I said on page 3

apart from the injection times that are, in my opinion, could be improved but still are good, the rest ? wrong
the rail pressure ? been increased to 120 bar, at certain points,bringing it from 1600 to 1728bar... the turbo not to talk about, all of which is completely wrong

use that file means to ruin your car.

[patrik2]

No thanks I put the ori don't want to risk .. I need your drive or at least addresses to begin to understand something .. thanks to anyone who can help me ..

[giarras]

listen to the advice of magi1984, I usually do not comment, never the work of others xch? each person has their own ideas but since we talk about technical and non-fantascenza, I say to you that your file I don't like anything x.

[patrik2]

you giarras I put the ori .. could you help me with the drive, or at least addresses to begin to understand something ?? thanks ..