inconsistency air mass/mass air flow sensor

[macinische90]

hello guys I have a lancia delta 2.0 mtj someone can help me?I have this error: an inconsistency air mass/mass air flow sensor what can be?

[blackwolf76]

I would check the egr and sleeves turbo...

[macinische90]

the pressure is ok and the egr cleaned and put back in his place... controlled by examiner's all ok....

I can upload images, mind you I did see the egr as it is taken

nn I want to mattere out of the way but I made a test.. sara stupid, but I thought I would disconnect the mass air flow sensor and try the machine... I lerrore but the car is better than when the mass air flow sensor is attached,mo 2 things.. or the mass air flow sensor is to be changed or the control unit and so forth by riconoscrmi a value of the air-1200,I don't believe it, but now I don't know what to think... I have a doubt on legr on sensoremap on the manifold.. I dunno...

Guys I'm going to sleep.. Anyway I 80 euro max to spend,I will explain to you I found a deb of pierburg to 80, or make a map with the egr off? Goodnight to all

[Backgroop]

the pressure is ok and the egr cleaned and put back in his place... controlled by examiner's all ok....

I can upload images, mind you I did see the egr as it is taken

nn I want to mattere out of the way but I made a test.. sara stupid, but I thought I would disconnect the mass air flow sensor and try the machine... I lerrore but the car is better than when the mass air flow sensor is attached,mo 2 things.. or the mass air flow sensor is to be changed or the control unit and so forth by riconoscrmi a value of the air-1200,I don't believe it, but now I don't know what to think... I have a doubt on legr on sensoremap on the manifold.. I dunno...

Guys I'm going to sleep.. Anyway I 80 euro max to spend,I will explain to you I found a deb of pierburg to 80, or make a map with the egr off? Goodnight to all





I invite you not to post messages in succession, otherwise it will be considered spam

[morisuper]

try to close the egr with a plate and see if it goes well the car , postami the file that you I close it I egr from the map

[macinische90]

Thanks, but for free?

[legendaryslave]

the mass of air to a minimum ? have you watched it ?

[macinische90]

Of course,air mass measured mass air objective are the same 321=321 I did not understand why CN deb attached to the machine part to 2700 if detachment of the connector from the car flies and part of the 1800s....

[beppe.c]

Of course,air mass measured mass air objective are the same 321=321 I did not understand why CN deb attached to the machine part to 2700 if detachment of the connector from the car flies and part of the 1800s....
see the max value of the air mass measured either clean or delete from the map egr and gates l error show if the value of the mass air ? higher.

[macinische90]

I do not understand.....

[beppe.c]

I do not understand.....
see the max value of air aspirates before and after cleaning the egr valve and see if ? increased.

[macinische90]

no 1200...can you please post the log8106
try to look at this machine in motion
8107in movement

[michele30]

has butterflies on the manifold, that car? why? I there are the past with a brera 2.4 the same error and were those..
controls.

[macinische90]

What do you mean??

[macinische90]

8109 I made the photos... Where are they?8110

[franco1971]

Usually when it is a problem of butterflies to me by another type of error, (but take a look doesn't hurt either)***** o if the egr is in order and works well in removing the mass air flow sensor a clean if it improves the change because it became slow in response

[macinische90]

the mass air flow sensor l I disassembled and cleaned it... the first thing to do is to close the egr using the map ,I'm waiting for someone who can help me cn ecm,it seems that you need to change only one bit.. I dunno...

[beppe.c]

the air mass measured as it comes I don't see any log that indicates(I mean, with factory attached),cmq clean or delete the egr, you will see that solve the problem.

[macinische90]

Maybe.. Mesa will stay? locked in long finch? someone help me... I have the kess to still be around tomorrow then goodbye... I need urgently, or a file ori way or how to close the egr...

[macinische90]

The message n12 c, and the log

[ugoboss]

the mass air flow sensor l I disassembled and cleaned it... the first thing to do is to close the egr using the map ,I'm waiting for someone who can help me cn ecm,it seems that you need to change only one bit.. I dunno...

do you want to help but don't have not even posted the file ori, given that you can't download any mod that someone could you explain to me how can we help you? he begins to read and post your file.

[macinische90]

You're right Ugo boss, I thought it only change maybe CN your help... Now SN it to work when I return home in the load from the PC,but I preferred that to help me you. Thank you good day

[beppe.c]

The message n12 c, and the log
yes I saw but did not ? a log can serve it tells you the max value of the air mass sucked in,since you have the kess do a reading and disable the egr intando then you look at the to do.
more than this I can't help you.

[macinische90]

Tonight just art at home I do it also because I have to return it to the master,from the log it seems that the mass of air measured is equal to that goal, both in acceleration to a minimum.. CN an oscilloscope to be able to measure the deb?