airbag 500 mjt problem

[guidotacco]

I have a dtc with lamp on and the message on the display:block fuel is not available,that is not clear, after I did the clear and alignment proxy,I tried to put a file to the virgin on the e2prom of the ecu the engine, but nothing to do,however the car walks norlmalmente,that only this cabbage indicator with the message,can someone give me some tips?
thanks

[giuseppeturbo]

you have to unlock the switch inertial let me understand one thing, the machine h had an accident,

[guidotacco]

yes,I put a clear alignment proxy and everything is ok except that message with a triangle on the canvas

[giuseppeturbo]

the test, however, the release of the switch inertial puodarsi that may solve the problem

[guidotacco]

tried nothing

[giuseppeturbo]

dom the light that turns on and tringolare with the exclamation point inside of amber

[guidotacco]

it is yellow!

[legendaryslave]

have you tried with a diagnosis in the body

[guidotacco]

all of the modules are ok ,the error ? only on the engine ecu

[giuseppeturbo]

the light may riferissi to the other, even to the engine oil pressure with the permission of the admin I can post the manual instructions in pdf of this machine if you are not there and so I quasiquasi I'd do a bekup of the control unit, then all the cloth mapping of the original, and how after the accident, and would it be the outlet of the inertial switch

[legendaryslave]

The block fuel ? does it take the ecu to the air bag I would start from them

[motorsport]

I confirm,the problem in the airbag control unit to me and happened last week on the fiat 500, mjt,after the fact, the clear after two days the same problem,I advise you to buy a e2p new 95320, and write clear,this happens even when a drop in voltage of the battery!!

[egs]

I confirm,the problem in the airbag control unit to me and happened last week on the fiat 500, mjt,after the fact, the clear after two days the same problem,I advise you to buy a e2p new 95320, and write clear,this happens even when a drop in voltage of the battery!!

You hate him, try to write the crash on a new memory.

[guidotacco]

in fact, it was the clear taken by an ecu of the same numbers on his car worked well,made clear on his dump and resolved,for this I wanted to thank rego88!and all of you

[msport (exil77grande)]

perfect excellent discussion resolved.