help rooster

[ema74]

hi
I bought a galletto2 v53, but operates on the outlet side with 12v red led c'? next does not turn on.
also the software part, but everything else remains in grey and I cannot select anything.
I followed the activation as described in the info, but I think that the red led should turn on power to the cock, maybe broken?

[passion engines]

Hi, try to connect it to the obd of the car, and don't forget to apply the minigender, easy-to both the defective power supply...you're using the sw or if you are trying????

[ema74]

not minigender supplied, I connected a battery to the 12v lead and will not turn on.
the software I have tried it with the one supplied with the

[passion engines]

We are here to help you, try to understand that you have the tool in your hand and you do the tests, and then explained in detail your problem.
1 can you recognize a v53 from a 48 v?

[ema74]

I don't know the difference between v48 and 53 to me they sold it to v53.
the software part but the writings are greyed out and are not activated at the click of a mouse, and I noticed that feeding does not turn on the red led located on the side where it is powered.
the package did not contain the minigender

here's the picture of the content

[carlo abarth]

open it and check the welds!!!!

[passion engines]

here's the picture of the content
http://img138.imageshack.us/img138/8640/9mb3.jpghai tried plugging in the machine ? in the system devices you find the tool?

[ema74]

in the system devices check the cock, in the car, I haven't tried it.
but you can't figure out from the photo if it is a v53 or not?

[passion engines]

in the system devices check the cock, in the car, I haven't tried it.
but you can't figure out from the photo if it is a v53 or not?
From the outer box three-led-we understand that not ? a v53 and also the lack of mini gender

[Danyit84]

But excuse me for the stupid question (by little I'm entering this world), what's the use of the power in the cock? I used a V53 original and I have not had to feed it to read the map.
Thanks people...

[blackwolf76]

The interface needs power to operate, which is done through the obd. If you read the map for sure you have powered the cock.

[ugoboss]

surely not ? a v53, also missing the flat colored for the j-tag.

[Danyit84]

no no, I have not used the outlet side of the power...

[ugoboss]

no no, I have not used the outlet side of the power...

if you use it plugged into the obd is fed from the outlet side serves to feed it to the tour.

[Danyit84]

Ok thanks, I've never seen him use to the tour unfortunately. Thanks for the info...

[passion engines]

Ok thanks, I've never seen him use the bench unfortunately. Thanks for the info...Remember to use the mini gender

[Danyit84]

Passion motors, thank you for the tip... but I still have not approached the study of these interfaces, I am now trying to decipher the maps in 2D. I used the wing only to read the map of my car... but for pure educational purposes, given that my ecu ? a hybrid and many have stuck...

[ema74]

I tried the cock of my friend and well-known to her when I connect it to the usb you turn on the king? in my own no, I think that as you say is not a v53 but neither works.

[Errecinque]

Remember to use the mini gender
Can you explain to a neophyte of the cock what the mini is the gender and when it should be used? The Cio? in the image on the program eobd2012 when it appears this adapter with the inscription "standard " must be interposed between the cable and the tool or not?

[passion engines]

The hurry ? a bad thing, all the guys that I follow, I always say: the first study about the cars that the ecu montano, who issues meet to read and write, if you read the serial or otherwise, on the sw c? written use-it-or use the mini gender in serial better if you keep it always mounted. I always say, before you hurry to use the tool, a basic computer and the pc would be better, before making a mistake is better to ask......

[Errecinque]

The hurry ? a bad thing, all the guys that I follow, I always say: the first study about the cars that the ecu montano, who issues meet to read and write, if you read the serial or otherwise, on the sw c? written use-it-or use the mini gender in serial better if you keep it always mounted. I always say, before you hurry to use the tool, a basic computer and the pc would be better, before making a mistake is better to ask......
? true you are right.....but you can't? know everything about everything ...you never stop learning, especially if ? just a hobby in his spare time (what ? always little) . I asked why? I'm mini gender seems to me to eye, only a simple adapter female to male, and never saw the usefulness? seen that the cable supplied is applied directly to the serial plug of the cock for? if the damage included the avr? its why? and I would like to understand....Thanks

[Danyit84]

I agree with errecinque... the name ? a p? generic, mini gender, reckon change of genre, in this case I would say sex change, the cio? as there are on sale everywhere a converter from male to female or vice versa...
For the mathematical certainty of what I say, you should try to use a tester and check the construction of the adapter of the rooster, I would not like this adapter is, let's say... let's say not a common mini-gender changer, one may s? have some pins reversed...
It is up to you owners experience...

[ema74]

however, still not well understood, and my version, still in the package, this mini gender was not there

[Danyit84]

Then, look from the little that I know... corregetemi if I'm wrong, but it should be cos?, the V53 real should be the chinese clone of the v54. So I gather that your not ? the v53... now understand that version is the last I see, as in trade ? very easy to find 53 which are 52, 52 that are 48... in short, I hope you get the idea...
A clue that I would give you ? that the older versions work on xp and not digest very 7... unlike the new versions.
I should also mention that your has 3 leds, and it has not minigender...

[ugoboss]

Then, look from the little that I know... corregetemi if I'm wrong, but it should be cos?, the V53 real should be the chinese clone of the v54. So I gather that your not ? the v53... now understand that version is the last I see, as in trade ? very easy to find 53 which are 52, 52 that are 48... in short, I hope you get the idea...
A clue that I would give you ? that the older versions work on xp and not digest very 7... unlike the new versions.
I should also mention that your has 3 leds, and it has not minigender...

guys been doing a bit of confusion :-) the fgtech before it came out the v53 were all v48 any acronym had above, and it worked very well on both xp and seven, the v53 at the beginning it only worked on xp but with east asian languages installed, now it works fine also on seven just find one that you activate, the v53 of the j-tag ( which is that of the bdm) but has a flat colored for the j-tag and the mini-gender, which is not needed when you use the bootloder, but you have to always use it when reading and writing to the socket eobd, and in any case, I told the program, if he wants to, ec written use-it if no mini gender ? barred, in conclusion, that of the user, above, in my opinion, is not a v53 but a v48, if I told you some******* correct me without problem.

[Danyit84]

I do not know much, but your speech a row, only that somewhere, not paying attention, why? I'm trying to understand the maps... I had read that the old ones work on xp new on seven, also to me ? seemed to see the best clones with usb dongle... but don't ask me what it's for...
I agree on the fact that the cock of the user ? the v53, now 52 51 48 I don't know... but surely you're right, sar? a 48-why? I read more? times of users with the 53 or 52 or other, but really? are V-48, c'? a confusion with these clones terrifying...
In fact, even if pi? times are at bargain prices, I backed off from the purchase, and I decided that for now I have to limit to admire the original ones of my friend... :-(
Too much confusion in my opinion, users that say ? equal to the original, others who don't read a jot, ? a game of Russian roulette...

[ema74]

ugoboss,
what do you mean, "now it works very well on seven just find one that will activate" perhaps mine is not functioning x, which must be activated?
and how is it activated??

[ugoboss]

hello Danyit84 , the dongle was on the first v53, but was then eliminated by adding the dll (I think 4) in the folder of the program.

hello ema74, I speak from personal experience and I have said that because my not going on seven, and he wanted the date to the 1-1-2013, but now, there are people (very few) that can go through the dll to let you work on seven, and with the current date, however, this dll must be enabled.

p.s. am I not that active :-)

[Danyit84]

Thanks ugoboss, I'm doing a culture, even on this cock... :-D

[amen]

Also I would be interested in these dlls that operate gallo also on seven, and the current date, someone knows more??

[ema74]

but the v53 with 3 leds and without minigender exists or not?
why? I saw in the other network, that sell the cock as my own, and specify that it is v53.

[ugoboss]

but the v53 with 3 leds and without minigender exists or not?
why? I saw in the other network, that sell the cock as my own, and specify that it is v53.

I have not never seen, but excuse when you open the sw test to see if you have the protocols j-tag - renesas - and if he has the unlock simos pcr2.1, and especially if they ask you to the mini gender.

[sportknight]

v53 without minigender not exist unless they are v53/54 mini...

the one in the picture ? a v48 and probably does not work,the one with the written usually ? the worst
I hope that you do not have to pay a lot

[msport (exil77grande)]

I don't know the difference between v48 and 53 to me they sold it to v53.
the software part but the writings are greyed out and are not activated at the click of a mouse, and I noticed that feeding does not turn on the red led located on the side where it is powered.
the package did not contain the minigender

here's the picture of the content

I remind you that it's forbidden to post photos with external links to the forum, otherwise, certain rules would not make sense.

[ema74]

I put an external link because I do not have permission to publish the photo, but a photo of my product, and does not endorse anything or anyone

[msport (exil77grande)]

I put an external link because I do not have permission to publish the photo, but a photo of my product, and does not endorse anything or anyone

anyone can attach the material in the forum, if anything, can not download.