View The Full Version : Autocom box gold...dead help!!!
Good day to all ? for the case that happened to someone that the autocom after a "small" impact on the aluminium box is not working more???
...Or better, he turns on but does not recognize the interface, I do the test but does not recognize it give me error with the num of series
if ? gi? happened to someone can give me advice??? ....thanks
Alessio93
28-05-2014, 15:37
hi dov? that has had the impact ?
on the edge of the box to about half...? dropped from a height of 40cm
sportknight
28-05-2014, 17:56
open it and check the welds
tecnoracing
28-05-2014, 21:35
but the pc recognizes the device in the device manager ?
Alessio93
29-05-2014, 15:03
you the pc pu? also recognize the perifarica but the software is not!!! open it to check the welds and see where he has had the impact if the bridge of the iron is giving problmi to the tab welded
sa80libero
29-05-2014, 19:23
but the body is ? deformed?
make sure to check the card, you may have broken...
no, the body has not been damaged and the card ? cracked I tried to check the welds but nothing not a click is heard as the rel?....cabbage was a splinter had then oki
sportknight
30-05-2014, 11:28
scaldalo with a hair dryer or a hot air gun,I with my I fixed cos
I followed the advice and thank you but nothing seems to me a assurdit? for one thing, so it has stopped....
matteo87
05-06-2014, 17:40
if you go to device manager on the pc you see it??
Throw it out surely ? a welding controls, especially the micro...........
Good day to all ? for the case that happened to someone that the autocom after a "small" impact on the aluminium box is not working more???
...Or better, he turns on but does not recognize the interface, I do the test but does not recognize it give me error with the num of series
if ? gi? happened to someone can give me advice??? ....thanks
In that sense you get error with the serial number ?What tells you specifically?
hftdelta
13-06-2014, 21:15
Check out all the tracks and the components that you do not loose
matteo87
13-06-2014, 22:02
if you go to device manager on the pc you see it??
I wrote this because? it may have lost the ft232
The pc sees it and recognizes the n series, which first appeared in green-and-now ? in red.
giuseppeturbo
15-06-2014, 08:08
Have you tried to change the usb cable?
sa80libero
15-06-2014, 13:28
in the device manager gives you the yellow triangle?
The pc sees it and recognizes the n series, which first appeared in green-and-now ? in red.
Seen that take the test and you get error on the serial number ? likely that in botta, who has taken the VCI, the rom avr? lost the serial number;
Have to enter the serial number in the VCI..... if I'm not mistaken, somewhere on the forum there was a program that allowed you to delete the serial number from the VCI and re-entering a new one in your case delete the old serial number and re-enter the serial number !Of course, the serial number that you enter must be equal to the one you used during the installation of the software on the pc !
Try and let us know !
Now I'm trying to reinstall everything, and she has to rewrite the serial number....let's see...thanks for the tips.
Now I'm trying to reinstall everything, and she has to rewrite the serial number....let's see...thanks for the tips.
I hope that I have explained evil; to write no. of the series in the VCI c'? need a program, not just do the reinstallation of the software and do the firmware update !!
I hope that I have explained evil; to write no. of the series in the VCI c'? need a program, not just do the reinstallation of the software and do the firmware update !!
Thank you tech, you explained very well c'? I have the program, let's see if before night I ****** to try like you said... there st? suffering from the lack, I've got another new cdp+ 100250 but it has some things that the old one did.
Thank you tech, you explained very well c'? I have the program, let's see if before night I ****** to try like you said... there st? suffering from the lack, I've got another new cdp+ 100250 but it has some things that the old one did.
You managed to fix it ?
No caspiterina I tried to brush the welds but nothing the dear relays taking as much as you collegavi not take more? I tried to write again to the n?serial but I get and error with the tool, not the law, not even....but the three led illuminano....orcaloca!!!!!
No caspiterina I tried to brush the welds but nothing the dear relays taking as much as you collegavi not take more? I tried to write again to the n?serial but I get and error with the tool, not the law, not even....but the three led illuminano....orcaloca!!!!!
The tool does not the law, but he can't even write ?
If you do not even able to write can? be that the memory in which are located the serial ? dannegiata;
I know that I must keep it as an ornament !!
faberecu
29-06-2014, 23:41
you have the tracks from the usb connector broken on the pcb
don't see but if you measure are open , do the four bridges with copper ... and finish , made a number of 100% or mandamelo if you're not familiar with the microscope, and the station, sometimes the components with + mass tear the slopes , or you dissaldano
? good idea to resolder all the pcb when it arrives , many are not the best
you have the tracks from the usb connector broken on the pcb
don't see but if you measure are open , do the four bridges with copper ... and finish , made a number of 100% or mandamelo if you're not familiar with the microscope, and the station, sometimes the components with + mass tear the slopes , or you dissaldano
? good idea to resolder all the pcb when it arrives , many are not the best
Hi thanks for the suggestion I st? by controlling what I say, but I can't find anything broken...what could break with a vibration in the meta box pcb?
I don't feel like starting the rel?, if I connect the usb-to him, the red led lights up and also if I connect to the eobd socket.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.