fadialto

27-05-2014, 18:45

Good evening to all,
I have just bought a 159 sportwagon with several options...one of these c'? the rain sensor that would trigger the tergigristalli, and adjust them according to the intensity? of the rain... unfortunately in my case ? just cos?...it seems that this sensor does not want to know about this work...
Do you know if c'? somewhere a screw for adjusting the sensitivity? of the sensor?
also I was thinking to take it apart to see if maybe it's you ? simply disconnected...does anyone know how to do it???
Thanks in advance!

lightning

Hello, the machine is equipped with the navigation system? If you go in the setting to the voice, twilight sensor and the rulers ,but you to the problems on the wiping, or when you dazzle not darkens the mirror.now I read the post, according to me, you have to change the sensor on the glass.(li ? a nice problem you have to change the glass)

ugoboss

I don't understand what the center the mirror on the rain sensor, which in any case has no adjustment screw, I would not like to be mistaken with another machine, but it seemed to me that you could replace.

fadialto

Hello, the machine is equipped with the navigation system? If you go in the setting to the voice, twilight sensor and the rulers ,but you to the problems on the wiping, or when you dazzle not darkens the mirror.now I read the post, according to me, you have to change the sensor on the glass.(li ? a nice problem you have to change the glass)

Hello, the machine nn has the navigation...I assume that the problem is on the sensor glass...but do you think that you will be able to remove without replacing all the glass???

fadialto

28-05-2014, 00:06

I don't understand what the center the mirror on the rain sensor, which in any case has no adjustment screw, I would not like to be mistaken with another machine, but it seemed to me that you could replace.
Hello, the rain sensor ? positioned on the glass and ? boxed in a plastic casing that holds the mirror! To replace it you must disassemble Everything???do you know a procedure to x the replacement of only the rain sensor??

fadialto

Thanks to all for the answers!

Ross

make enough piet? those systems on the cars of the Fiat group. I also had I a 159, and I turned off the rain sensor and lights

fadialto

Hi Ross,
really? the sensor of the lights works fine and I have to say, even the rear-transition, the only thing that is not working right ? the rain sensor! at this point I think it is defective. mh?...

Ross

Of course, for? deactivating the rain sensor bypass fail, even the lights

pOlPo85

as you turn off? The light sensor I do not need a pi? given that they are now mandatory in the day, and especially with the xenon c'? the risk of passing between light/dark repeatedly fulminino bulbs

The rain sensor instead makes me crazy, it works awful. The intermittent operation ? completely at random, in the pouring rain do not move, then I enter the gallery and start to move wildly on the glass dry, ruining the brushes.

I wish I could go to the intermittently normal

Ross

you have to use the sw multiecuscan with the elm327. There are dedicated functions.

pOlPo85

Okay even the little bluetooth or takes the specific cables with the pinout appropriate? The version of the MES ? the 2.0 Registered. I'm poking a bit with "Simulated" but I do not find it...

Ross

10-06-2014, 16:43

you must go to the central electronics, alignment proxy and then activations (the last entry).

pOlPo85

you must go to the central electronics, alignment proxy and then activations (the last entry).

Does not work, or a better one than that ? only part of the procedure. You have to deactivate the rain sensor by l?, do the proxi alignment and then unplug the sensor physically (by removing the mirror). The procedure "electronics" should serve only to not have errors after having removed physically

Ross

exactly... I have given wrongly assume he had already? proceeded to disconnect the wiring

pOlPo85