ecu mercedes burnt???

[beppe.c]

hi to all,for the error of distraction while I was colleganto bdm the skedino I are connected with the first starting from the right instead of the left I tried the connssione and not going after I realized that dell error l power gave the bdm,after I tried to mount the ecu but the car shows no signs of life, with the only hang-up of the fan.the ecu in place ? mercedes edc16c2 0281011939-713.
I hope in some remedy without replacement.
to someone ? happened to you?

[carlo abarth]

I'm sorry to say but ..and the only solution that you have mentioned!!!

[beppe.c]

I have to replace?know someone where it to find?I have the client walk.

[beppe.c]

what you can be burned?the whole ecu?I don't think!!some info.

[blackwolf76]

When the fan to the maximum ? why? the body doesn't read the engine control unit...

You're in a nice casino, but I know that you first look at a replacement demolition instead of trying to repair that, otherwise the customer may become frustrated.

[beppe.c]

When the fan to the maximum ? why? the body doesn't read the engine control unit...

You're in a nice casino, but I know that you first look at a replacement demolition instead of trying to repair that, otherwise the customer may become frustrated.

damn me damn I got distracted and I made a mess.does anyone know if the micro in this ecu c? the chassis number?just balance the eeprom ori in what I'm going to buy no?

[sportknight]

burnt,I'm sorry

try to read the eprom,I don't want to be burned also that

[beppe.c]

I tried to connect bdm but does not connect.

[faberecu]

dead! I have a safe like tomorrow I see .the problem ? you need to swap the chip, if you can not read in bdm , I do safely to the micro, or find a full bdm or evidence should go

[carlo abarth]

it is a e270???

[beppe.c]

it is a e270???

? a 220.

what? the eeprom with this ecu?(I have not seen yet)I have the willem can I read the memory of the old and write the eeprom bdm in the new?

[blackwolf76]

If you do not ? compromised you can do it without problems.

[legendaryslave]

you have to see it I can't remember if this ecu has the e2p or ? contained in the micro

[sno74]

As they said other better, that's what you do to try an ecu used only thing that you can retrieve the contents of the ep2 the steps on the ecu used if you do not find with the same hw and sw devu also find a Bk from someone done bdm.........

[legendaryslave]

As they said other better, that's what you do to try an ecu used only thing that you can retrieve the contents of the ep2 the steps on the ecu used if you do not find with the same hw and sw devu also find a Bk from someone done bdm.........

andre but this one has the e2p or as the a-class ? all mel micro ?

[carlo abarth]

andre but this one has the e2p or as the a-class ? all mel micro ?
I know that the e2p is in the flasks as you say legendary!!

[legendaryslave]

I know that the e2p is in the flasks as you say legendary!!

if ? so the thing is complicated

[beppe.c]

I know that the e2p is in the flasks as you say legendary!!
in flhasc??tomorrow I find another,if anyone perhaps has any of the hands to tell me something.

[faberecu]

[sno74]

yes I have read with the ktag not told me of ep2 virtual I gave ep2 - mpc - flash divided, however, Faber has a hand is making a replacement of the ecu as soon as he has finished there says it all...........

[beppe.c]

problem solved!I found an ecu to collapse with the same numbers,I read with willem the 95320 and I have written in a bdm and all ok.
I also tried to do the part of his and the game, but had all the lights are on then I wrote the number of the frame is ok,but to be 100% sure I wrote the files of the old eeprom.
thanks to all for your help

[sportknight]

as you have written the number of the frame?

[beppe.c]

as you have written the number of the frame?
in hexadecimal.

[sno74]

ok well that you have concluded..........