View The Full Version : Opinion equipment
Hello to all of you.
I wanted to know if you could give me some advice on what attrazzatura buy.
Honestly, I thought the Kess-v2 K-tag, galletto v53 and BDM..
according to you, what do you think? thank you for any advice
Backgroop
13-05-2014, 18:12
Hello I will recommend the Kess v2 and k-tag, the rooster let it be more? complicated.. these two instruments cover about 95% of the cars in circulation, you can try to contact the Admin definitely will have a solution for you.
Hello I will recommend the Kess v2 and k-tag, the rooster let it be more? complicated.. these two instruments cover about 95% of the cars in circulation, you can try to contact the Admin definitely will have a solution for you.
thanks a lot.. for contact and ask for advice to the Admin how to do it?
the advice that you have given above ? correct, I also think that as the tools you are at the top get in touch with our Admin who will advise you and maybe we can get you to x any purchase:
info*professionalchiptuning.net
Hello I will recommend the Kess v2 and k-tag, the rooster let it be more? complicated.. these two instruments cover about 95% of the cars in circulation, you can try to contact the Admin definitely will have a solution for you.
Very good,this response took me a little question that I had
giuseppeturbo
15-05-2014, 17:29
good choice
Hello I will recommend the Kess v2 and k-tag, the rooster let it be more? complicated.. these two instruments cover about 95% of the cars in circulation, you can try to contact the Admin definitely will have a solution for you.
the BDM then ? so indispensable?
LL205gti
18-05-2014, 21:09
hello guys, the discussion I'm interested in. The remaining 5 % that do not ? can do to that car it is? indicatively, I mean, I'm not asking for a detailed list!
Backgroop
18-05-2014, 21:11
the BDM then ? so indispensable?
you may take a BDM 100, you'll find him for a little.. but for a start, if you have no experience I do not recommend it, a priori, on the contrary, I strongly recommend
of course if you want to start to work seriously at least after you will have clear ideas
you may take a BDM 100, you'll find him for a little.. but for a start, if you have no experience I do not recommend it, a priori, on the contrary, I strongly recommend
of course if you want to start to work seriously at least after you will have clear ideas
in fact.. the only problem ? I still don't know where to turn..could you advise me who could seriamentefare of the courses?
Backgroop
18-05-2014, 23:16
info*professionalchiptuning.net
Please contact the admin they are very professional, you agree to a course
guys have already had experience with the mpps V16?
everyname
27-05-2014, 00:39
guys have already had experience with the mpps V16?
I use the v13.02, I happened to have a couple of cars that this version does not read then I tried the v16...the result, not the law, not even this.
Instead, the cars v13 law are read from the v16, and the two files are the same.
You happened to have a car that a version of the law and not the other?
I use the v13.02, I happened to have a couple of cars that this version does not read then I tried the v16...the result, not the law, not even this.
Instead, the cars v13 law are read from the v16, and the two files are the same.
You happened to have a car that a version of the law and not the other?
I use the v13 like you
I decided that I don't take ir? mpps but I go on other interfaces
everyname
27-05-2014, 20:19
I use the v13 like you
I decided that I don't take ir? mpps but I go on other interfaces
Talk of interfaces that work via OBD?
Talk of interfaces that work via OBD?
I want to buy a kess v2 for obd and the k-tag
everyname
28-05-2014, 10:05
I want to buy a kess v2 for obd and the k-tag
You, ? a couple very common. The Cock v54 instead? I read more? a post in which you said that ? pi? difficult to use..
Exelion1986
28-05-2014, 12:13
the cockerel v54 I have it in hand for less than a week, but it doesn't seem so complicated to use...? I don't have experience with other interfaces, so I cannot make a comparison
c'? nice that with this interface you have all the functions in one, and especially installed on win 7 64 bit at the first shot
everyname
28-05-2014, 20:03
the cockerel v54 I have it in hand for less than a week, but it doesn't seem so complicated to use...? I don't have experience with other interfaces, so I cannot make a comparison
c'? nice that with this interface you have all the functions in one, and especially installed on win 7 64 bit at the first shot
Very good I would say. As ever steps to the kessv2 when you have the cock, c'? something that you can't make it or ? try another interface?
Exelion1986
28-05-2014, 20:08
no ? state Marcuc to say that she wants to take the kess...
to me, it's fine to the cock for now, then tomorrow who knows
You, ? a couple very common. The Cock v54 instead? I read more? a post in which you said that ? pi? difficult to use..
the cock v54 say that it is pi? simple v53 but not the best..I've never used..
I leave judging to the pi? experts
everyname
29-05-2014, 08:52
no ? state Marcuc to say that she wants to take the kess...
to me, it's fine to the cock for now, then tomorrow who knows?
oopsss! With the Cock you can work via OBD, serial, at the desk and open the control unit?
Hi, I have bought the v54 by a few days and for those like me who always has to read from the serial port, I have to say that ? a bit of a mess, in fact, the many threads and we do not understand anything...who can? recommend a practice or a course to be able to familiarize yourself with the readings on the bench? thanks
Hi, I have bought the v54 by a few days and for those like me who always has to read from the serial port, I have to say that ? a bit of a mess, in fact, the many threads and we do not understand anything...who can? recommend a practice or a course to be able to familiarize yourself with the readings on the bench? thanks
you've given a look at the guide that c'? together with the rooster??
hello I read the guide but do not post all the pictures on how to assemble all the components and then for those who like that ? the first time I use the cock does not ? simple...I would like full images
Exelion1986
19-09-2014, 08:52
what don't you ? clear in particular?
then I suggest you to buy a template bdm that saves you a lot of welds
the template is the gi? jack and I arrive on Monday?..then the manual tells me to connect the USB socket to the galletto 4 BDM cable and here we are, then, the food with the jack so you ignite? the red led( ? here I block)...this jack I think I've figured out what it is but to feed it to 12volt adapter needed...then I am being shown the picture on how to assemble the adapter, CMD,...a part of me says to connect to press CMD, size, sport (I don't know what you are talking about), and then from the other side to feed the wire with the switch on the 12volt...we are only talking about ECU BOSCH
Exelion1986
19-09-2014, 11:19
dimension sport ? a manufacturer of a dime, it just says that if you are in possession of one of these, you can use it
I assume that you have taken the plexiglass, which, however, goes well with the cock
the power supply you have to buy separately, and it cost around 10 €, and then I would get even one pin female connector of the type that c'? in the cable, the bosch, the white one so to speak
bosch I have not yet made, but personally the power supply via jack, I never date, only to the jack that I said to you before, and the red led ? always on even when the cos
exact I bought the template in plexiglass with the various schedule spring, and I don't need to do any welding...the plug on the saw, now I miss only the power supply and then I'm ready...in fact give? current without the jack, it seems to me the better for me...then you do? know when to try? read them thanks
dimension sport ? a manufacturer of a dime, it just says that if you are in possession of one of these, you can use it
I assume that you have taken the plexiglass, which, however, goes well with the cock
the power supply you have to buy separately, and it cost around 10 €, and then I would get even one pin female connector of the type that c'? in the cable, the bosch, the white one so to speak
bosch I have not yet made, but personally the power supply via jack, I never date, only to the jack that I said to you before, and the red led ? always on so well?
call size sport "manufacturer of jigs" ? wrong and simplistic ? a company that produces sw and hw for tunin, and much more, visit her website and then see.
Exelion1986
19-09-2014, 18:45
it certainly was to understand that it was a "brand"
Matty23p
21-09-2014, 11:49
I personally use a galletto v53 and a mpps...? how would you have advised the kess goes very well, I used it a few times and never a problem... you Could also pick up a mpps according to me does not cost a lot and on some cars, type golf 4 etc. ? perfect... I use the ones with the scatoletto not the ones with the cable (board to take the one in the box).
hello I also have mpps with the cable which would be the one in the box?
Matty23p
21-09-2014, 20:27
Matty23p
21-09-2014, 20:34
sorry I have not renamed the photo, but there is no advertising? I don't think is a problem...sorry again...
I can not open it I have the message limit is active.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.