info galletto2 and virtualread

[ema74]

what does it mean when the gallo2 is the virtual read type in the ecu 6f3?

[sisco]

it means that the reading ? real, but that has a file in its database that matches that of the ecu that you're reading

[Ross]

I add that, then, if in the database there? the exact version of the sw in the ecu of the car which is connected to the cock, dar? error in reading.

[ema74]

where the database? and you can? update?
always talking about a clone of the rooster

[Ross]

The database ? compressed, you may update it if something that I have never been, and was not compatible with that of the v54

[ema74]

you know precisely the folder in which the database is located?

[Ross]

no, I'm sorry I don't know

[tecnoracing]

all the files of the readings are virtual in the user folder

the official also added to the virtual rad for the bosch edc16 c39 you would take a time to read them

[Ross]

you never stop learning :)

[ema74]

thanks tecnoracing

[tecnoracing]

the forum also serves for this

[marco_evolution]

Less evil that they do it only in the official something like this? put the file in virtualred in the sw of the wing nut for the edc16c39...if they did in the clones, there would be a bit of ecu blocked..Lately I see clones of the cock that fail in the reading, and if one tries to write a file read ok the block!

[gick]

where can you? find the update does anyone know???

[sportknight]

on clones works to perfection in the virtual reading and writing...

[V.V.]

marco_evolution depends on the type of tool that uses IMHO.

Virtual Read works very well with FGTech v53, it only takes a bit of courage to use it for the usual question regarding any updates to the Sw made on the car, then the version of Sw real, and the version of Sw that the interface makes a copy on the PC with the virtual reading since? they may not coincide with the consequent block!

[passion engines]

Hello, when the house mother makes a ecu upgrade automatically update the info to the ecu, that is, when data do you know that the sw version you have.......

[V.V.]

Yes, but if it is then the virtual read identifies a version of Sw that is different from the one actually present on the vehicle? If I remember correctly someone ? success!

[sa80libero]

should also change the version in the data if the software is updated, so I guess that the tool before downloading check in the database if they match the data after starting the virtual reed

[sportknight]

the tool is the virtual reading of what the law in the ecuid therefore may not be wrong,among other things, you can check out the one that saves before writing
I usually check everything with titanium or with winols to be sure that what I read or the real or virtual is correct..

[Exelion1986]

but when it does the virtual read any warning?
why? the other day I tried to read a Renault Scenic 1.9 dci with ecu Bosch EDC15C2 and put us in a minute and a half restituendomi a file from 512 kb
seems to me quite impossible that in a long time cos? short did read really

[CorsaroKr]

on edc15 read ? the real, the virtual reading the is only on a few marelli, specifically on the ecu 1.4 tj and 1.3 mj (even if on some of these, such as those mounted on the opel and lancia, reading ? real)... the only way to know if the reading ? real or virtual ? to see the car list of the obd galletto.
With regard to the virtual reading, the cock analyzes both the number of hw and sw and, in the case of an upgrade, if in its archive and can't find the exact file, it returns a message in which he invites us to proceed to the actual reading via bdm, then not c'? chance? error

[Exelion1986]

in the list says real reading, however, I forgot to say that I have a v54, maybe like someone said before in the new versions have implemented the virtual reading also for other models of ecu
my doubt ? born from the fact that we put a very little time, 1.5 min, while other cars that I have read has put us from 20 to 45 min

[ugoboss]

some edc15 such as those of the fiat group with the law in even less time, and ? a real reading, however when you go to select the right car at the bottom of the page tells you what type of reading' and how much ? the file that eventually the law.

[Exelion1986]

perfect, the behavior that I seemed to crash I thought it was the fault of my interface
seen that ? normal I put my heart in peace

[CorsaroKr]

yes, you can go quiet, reading ? real

[maurof650]

But, in the end the map files that are read are the two?

[Driver]

But, in the end the map files that are read are the two?

Usually you find only a file as if it were a normal reading. Pu? happen, as in the 1.3 mjt, which will save a file with coding the injectors. :)

[francescosparco]

guys I opened it, I also a discussion about it a few weeks ago.. now xo I got a idea. saw that my cock is not detected by the writing ( this is evident not present in its database), if I get the file ori in the network is always from someone that has read with the cock, then as a result I have problems to write it?

[Driver]

If you are retrieving a file with the Same N? SW and the Same N? HW your ecu does not have problems. For? do a ecu ID first, and keep good those numbers that you from.

[francescosparco]

S? obvious... l important, and that I certainly writes

[Driver]

If you want to stay quiet and hope for the best, the only ? open the ecu and do a good backup, if no, write the serial and hope, but usually always goes well!

[ake85]

in the list says real reading, however, I forgot to say that I have a v54, maybe like someone said before in the new versions have implemented the virtual reading also for other models of ecu
my doubt ? born from the fact that we put a very little time, 1.5 min, while other cars that I have read has put us from 20 to 45 min

where is the list of all the cars?

[Exelion1986]

go to the installation folder, then in the DOCUMENTS/DRIVER_LIST

[ake85]

thank you my mother the car park ? vast, I would say very good

[maurof650]

I have to say that I don't have the version that virtual read.........but the versions that do have a folder with all the maps?

[Driver]

In theory, all the versions of the rooster should do a virtual read. If you can't make the virtual probably ? a problem of HW or SW of your cock! However, in the SW c'? a compressed file where ? content the database of the virtual read. When you read the sw recognizes that file and finds it in its database, you save it as if I did a real reading of the ecu.

[rodcraft86]

I agree with machinist, is now also the pi? economic v54, do everything, try to contact the seller and get the correct software