edc17cp14 planted

[marcogti]

Hi all, today I have acted on a edc17cp14 that a car electrician has planted, it has pretty much used the mtm can for a correction to the dell eeprom, and not being able to access the ecu id has tried to make a password, then nothing more? communication of any kind, today I tried to connect the cock in the boot but nothing to do. From what they tell me the mtm should look for the password, and if the wrong plant in the micro, no one has a solution to resume? you say that with the cmd that is accessed through the pitches in the style of the bdm edc16, you are able to do something or that I know the x17 or the ktag can resume?
Meanwhile, the machine goes with another edc17 scodificata but remains in the message to display immobilizer is active and does not display nulal to the display.

[Backgroop]

With a tool Original do it safely, you can use the K-tag, if in your possession

[sportknight]

but should' write a backup of the original or am I wrong?

[sportknight]

for example, I've rebuilt a edc17 bmw already? modified from an original backup and I guarantee you that the differences are several and then not bring it off? never put the edited file directly

[RTR]

With the original equipment in the boot, you should make it without a problem, the backup should/could have the company where you got the equipment.

[alien78]

With the original equipment in the boot, you should make it without a problem, the backup should/could have the company where you got the equipment.
I alientech ori and I will tell you that their bank data 90% of the time they only have the sw

[marcogti]

Sorry one thing, but with a full backup ? feasible? No why? even doing just connect from any signs of life. I also tried with the two links but nothing. I don't know if cestinarla or that .

[legendaryslave]

17 until icasini the boot record of the processor always redo the id even if there is nothing written inside, I know that in your case ? own that sector that has gone to the creator, the only evidence that you ? remained to do ? try with more tools to recover it cercandoti to connect on pitches, but if the processor does not send any signal to the programmer and say here I am here I am (tc) there is nothing to do

[marcogti]

As I imagined. The block anyway ? been done conmtm can .who knows? that has made.

[legendaryslave]

I tell you, I did a test on an ecu edc17 outlet in demolition I wrote the whole FF both micro and eeprom drew on, however, id and allowed me to write then your problem is in the boot record of the processor or protected area as it is called in many, but this sector ? present in all processors of the motorola group and others,and if you notice even a tour unsoldered allows you to write the entire processor, but only of a specific area

[RTR]

alien78, on alientech I don't have experience, but in the database, the dimsport c'? practically everything

[marcogti]

But then to me you are saying that with the official tool there is a recovery function even if I can't even identify the proceasore? On ebay I see that vendononi tricore new if I can find someone who can make me a bga rework you are allowed to try. I threw 30 euro.

[frantik3]

the last I see!!!!

[RTR]

Watch if ? skipped the boot record, I see very, very difficult. ..anyway, as you said a trial for 30 euro you can? do

[Ross]

The file dimsport are not compatible with the genius and, therefore, incompatible with other interfaces?

[RTR]

ross the speech was another, and would igni file that is read by an interface ? a good rule is written with the same type of interface, which then dimsport on many ecu is the partial reading ? another account..

[Ross]

I have seen files read by the genius and are not compatible with other interfaces, in addition to being partial :)

[RTR]

yes, but anyway, it reads and writes with the same interface, I don't think you read cmd (or mpps and write with the rooster, or in kess...

[Ross]

depends on the ecu, you can also read with an instrument and write with another

[RTR]

I would not ever..

[Ross]

I did...

[marcogti]

ok then, here c'? no one with a x17 that pu? let me try to see if it starts again or not ? until now the only tool that can rimmeterla in the foot, this seems to be.

[Ross]

explained better please

[Senna_90]

Have you tried to put it in the boot with the rooster? you're not the law? you should try with a k-tag, why? I also with the cock I have problems on these ecu's