Step by step guide of how to unzip files and compact 2.5 mb 2mb 1mb 512kb nevertheless,

[crteam]

I do not know if ? the right section and I have to say that not scream and just to be pi? clear and uncluttered, I posted a guide created by me to unzip and compress file, nevertheless, to be able to use the cock in serial or mpps or bdm...


OPEN THE SW TITANIUM,SELECT THE TOOLS MENU
CONVERSIONS,CUT/PASTE FILES.
BROWSE THE FILE, 2.5 MB,CHECK THE BOX (DEFINED BY USER) AND SELECT THE FOLLOWING VALUES ON THE BASIS OF WHAT YOU WANT TO ACHIEVE:

2MB 2.5 MB
BEGINNING 080000 END 27FFFF

1MB 2MB
BEGINNING 000000 END-OF-0FFFFF

512KB REMAINING 2.5 MB
BEGINNING 000000 END-OF-07FFFF


TO SHRINK THE FILE IS 2.5 MB AND TO BE ABLE TO WRITE IN SERIAL WITH THE COCK,RUN THE TOOLS MENU,CONVERSIONS,CONCATENATES 2FILE AND ATTENTION TO FIRST SELECT THE FILE TO 512 AND THEN THE 2MB.THE ECM WILL SAY THE FILE IS TOO LARGE BUT EQUALLY CONFIRM AND YOU GET THE FILE, 2.5 MB

I hope I was clear and precise in the details for any questions, doubts or suggestions, we are qu? for this.

[max75]

Excellent guide for those not in the know....

[legendaryslave]

thanks for sharing

[Danny]

Very good! Only one thing I don ? clear.
In bdm, what? the file?!?

[crteam]

It depends on what you need.if you need to map the file and 2mb and the cio? the flash

[Danny]

And in the case of the block from the serial?
I was on my reading from serial port,through the cock, file, 2.5 mb....And I...
But, in the case of the block?

[crteam]

If it is not to the file of the scompatti and the write bdm only the flash file from the file 2.5

[max75]

Attention, the file of the micro is not read, 512 KB, but from 516 KB, before concatenarlo you have to cut off the last 4 KB, otherwise, the cock shall not accept it.

Is what I knew how to do to cut off the last 4 kb

[sisco]

Attention, the file of the micro is not read, 512 KB, but from 516 KB, before concatenarlo you have to cut off the last 4 KB, otherwise, the cock shall not accept it.

hello Matthew, in which case the files of the micro ? 516 KB? why? I have read 2 point and a meriva and the micro were all from 512 KB

[giarras]

excellent guide.*****plimenti!

[sisco]

hello matthew, I have read with gallo 2 version 48 and are 512 KB

[passion engines]

Guys, this guide ? been posted for those who use the toll on some families of ecu marelli reading kline finds a file from 2,560 Kb or flash and micro. Those who had this problem to work the file with sw dedicated now has the job easier, cut the file and you get one that will work perfectly with a variety of sw... If possible, avoid responding to get to off topic.