Class 168 turns off if lunges

[klajdin]

Hello everyone ! I have a Class 168 170 Cdi 2003 ? came from the pompista that died and gave always as error Iniettore1 P0201, revised tt and 4 injectors at first impression everything was all right, but how to sink the pedal goes faulty and goes off, do not in practice ? changed nothing. Checked the sensor, and pressure regulator and ? tt ok, wiring ok , I closed the egr so much x do a test since that memory wax that error but nothing changes.
Second you can? be a problem of the controller, which always returns the same error even if it is actually the injector works ?

[dvdtuning]

P0201 - P0204 - can I say that ? an error is also present on the opel and saab... I found in the network once a site that gave this solution to a 20ina of euros I think I don't know if the mercedes ? the same.
Don't misunderstand, I saw her while I was looking for other things for me ? impressed but I have had direct need.
I hope I have been of help.

[Backgroop]

The problem is due to the injectors or the pump.. it could be the pump, the low pressure that has brought this problem usually occurs on the smart 800 diesel most of the time are the injectors, but I've the same problem on one that had a pump low pressure full of slime

[Zac]

The problem is due to the injectors or the pump.. it could be the pump, the low pressure that has brought this problem usually occurs on the smart 800 diesel most of the time are the injectors, but I've the same problem on one that had a pump low pressure full of slime

quote in full, I would add a check of the hoses from the pump BP to the AP ,and the tank

[klajdin]

Thank you for the responses guys, I also check the B.P.,
" dvdtuning " thanks, but I can't find anything about that, every thing leads me always on "Injector Open/Closed" or "Ecu Fault" but if I think of pi? the second is that the injectors he passed them on the bench one x time.

[franco1971]

sorry but you can't post the parameters when it makes you defect?

[klajdin]

I made the diagnosis with MbStar but I can put 1 parameter x time and I don't see any negative feedback anyway, you can't? even try it x the road that turns off immediately, same thing with Autocom I do not see a group of parameters, but only one x time.

[legendaryslave]

Correction to a minimum and refusal injectors as we are ? Serving parameters

[Zac]

Check voltage at the connector of the injector. Should have 10 volts or more? . Check visually the connector for damage or broken strands .

[klajdin]

Correction to a minimum and refusal injectors as we are ? Serving parameters

Correction to a minimum, OK, that other parameters can be utilii ?


Check voltage at the connector of the injector. Should have 10 volts or more? . Check visually the connector for damage or broken strands .

the voltage I measured, but the connectors and the wires are affixed, tomorrow I do I tell if they have tried and found qlcsa.