Sign in

View The Full Version : Gallo V53 First reading failed



wailer
27-04-2014, 09:12
I explain my problem:
The tool ?: Galletto 2 Master EOBD2 V53 clone
I managed to install the soft, in fact it opens and works fine,
I turned off the Dongle to? when I connected it to my car VW Touran
I chose the driver , it reads the data correctly ECU EDC 16E1, but when you read the eprom from errore776477657766
This Tool applies the change of the resistance?
For those who have experience with this hardware ? well done?
Thanks

alex68
27-04-2014, 09:39
try a different protocol than the vw from the type of ecu you have.

wailer
27-04-2014, 09:58
try a different protocol than the vw from the type of ecu you have.

Sorry Alex, could you explain better?>
Do you mean to say another drive?

tezzero
27-04-2014, 11:08
it is another drive

wailer
27-04-2014, 11:39
practically those relating to the disel I've tried them all (4)
Only one is able to begin the reading, but at about 50% it stops giving error
The data of the driver selected does not correspond to? the CV of my

7769

gezame
28-04-2014, 00:42
Hello
Are you using the interface adapter and cable obd?

wailer
28-04-2014, 07:28
I'm using the adapter 15-pin male-to-female cable with OBD

eobdexpression
03-05-2014, 19:02
I'm using the adapter 15-pin male-to-female cable with OBD

Hello please have you solved the problem? A piece of advice that I can give ? to try on the other car with a different ecu, alfa, fiat etc. see a p? if it works for you............You should probably change or replace some resistance to the card, or the quartz that gives you the problems, and for this, it goes in error not allowing you to communicate with the line k-line or can the ecu anyway, try to uninstall everything and install the tool on another pc, but I doubt that this is the problem hello let me know

wailer
03-05-2014, 19:51
Hello please have you solved the problem? A piece of advice that I can give ? to try on the other car with a different ecu, alfa, fiat etc. see a p? if it works for you............You should probably change or replace some resistance to the card, or the quartz that gives you the problems, and for this, it goes in error not allowing you to communicate with the line k-line or can the ecu anyway, try to uninstall everything and install the tool on another pc, but I doubt that this is the problem hello let me know

For the moment I contacted the seller, who seems very helpful to see what he says, but I have no intention
to change the cos? in the case, subject to certain addresses.
On the other car, I can't,but I'm interested in if the thing works or not, even if only on my. I have the MPPS and that's fine.

eobdexpression
07-05-2014, 21:26
For the moment I contacted the seller, who seems very helpful to see what he says, but I have no intention
to change the cos? in the case, subject to certain addresses.
On the other car, I can't,but I'm interested in if the thing works or not, even if only on my. I have the MPPS and that's fine.

Hello Wailer at the end you have solved the problem with the rooster?

raziel77
14-05-2014, 15:59
before lettuna not risucita?
I have not read one until now,I'd like to throw in a cliff. gallo v53
the thing that makes me give up and that bdm I have used, and I have read in a serial 120d 177cv.
the kangoo I have read only the tables and does not write,
a stylus 2006? serial read error seed key, but with mmp2 v12 you
a pedra 2004 serial read error seed ney but with mmps v12 you
kia sorento 2005 serial not read, but with mpps v12 you
scania r-series serial't read it.
various iveco daily, renault serial unread
I read to tour a edc 15 of the mercedes sprinter.
it seems that the serial port of my weak,in a crisis of identity..

passion engines
14-05-2014, 16:30
before lettuna not risucita?
I have not read one until now,I'd like to throw in a cliff. gallo v53
the thing that makes me give up and that bdm I have used, and I have read in a serial 120d 177cv.
the kangoo I have read only the tables and does not write,
a stylus 2006? serial read error seed key, but with mmp2 v12 you
a pedra 2004 serial read error seed ney but with mmps v12 you
kia sorento 2005 serial not read, but with mpps v12 you
scania r-series serial't read it.
various iveco daily, renault serial unread
I read to tour a edc 15 of the mercedes sprinter.
it seems that serial my is weak,in a crisis of identity.. Hello now you know that with your can you get the' roast ;)

marco_evolution
26-05-2014, 16:47
Mpps on vag from God.. However weird the rooster, according to me, the avr? some problem

wailer
26-05-2014, 17:39
Mpps on vag from God.. However weird the rooster, according to me, the avr? some problem
One who has a problem now ? clear pero wanting to update my Post,, I can inform you that a small change in c ?.
I tried to read the Ecu of the Multiple (petrol+ Lpg), my wife and....took 52 min. but she read and saved without problems.

marco_evolution
26-05-2014, 17:44