Audi TT 1.8T 180 hp, changed motre auq with stand sedan, need help

[magi1984]

hello guys,I present the problem

The customer of a workshop that I follow ? remained walk in calabria this summer with his TT
the mechanic of the place, diagnosed that it was a problem of the engine, the has changed everything in the block when the engine 1.8 T 180 hp 1999, with the initials stand sedan in place of the original AUQ (always 1.8 T 180 hp for? 2002)
The engine stand sedan ? without the drive phase, the drive of the original ? been tied up with cable ties and left them in the engine compartment...vabb?...

the problem ? this, the car part and has no errors. after a while the road turns on the malfunction indicator light engine with error of course on the drive phase.

C'? in a way, reading the map of the drive, remove the drive phase?
maybe by comparing the file to a stand sedan with the file that I read of the AUQ?
or delete the table of the DTC cos? does not turn on ir? no malfunction indicator light?
or the other solution that I thought ? this: if the recovery of a control unit of a stand sedan and the scodifico should work without problems, right?

accept advice, and if c'? to pay any of the files there are no problems, you just need to know and let go of this damn car

[alfajtd]

you have to have a a2l of the vehicle or similar with other sw and go to search all the controls on the drive...
except that does not turn on ir? the light...

[giarras]

hello guys,I present the problem

The customer of a workshop that I follow ? remained walk in calabria this summer with his TT
the mechanic of the place, diagnosed that it was a problem of the engine, the has changed everything in the block when the engine 1.8 T 180 hp 1999, with the initials stand sedan in place of the original AUQ (always 1.8 T 180 hp for? 2002)
The engine stand sedan ? without the drive phase, the drive of the original ? been tied up with cable ties and left them in the engine compartment...vabb?...

the problem ? this, the car part and has no errors. after a while the road turns on the malfunction indicator light engine with error of course on the drive phase.

C'? in a way, reading the map of the drive, remove the drive phase?
maybe by comparing the file to a stand sedan with the file that I read of the AUQ?
or delete the table of the DTC cos? does not turn on ir? no malfunction indicator light?
or the other solution that I thought ? this: if the recovery of a control unit of a stand sedan and the scodifico should work without problems, right?

accept advice, and if c'? to pay any of the files there are no problems, you just need to know and let go of this damn car

if you need any advice very professional, I can put you in touch with a friend of mine who has worked for ferrari f1 and now works as a****workshop in the audi let me know that you do the cell.

[magi1984]

the problem ? was resolved by deleting the tables of the DTC from the original file of the car.

:D

[klajdin]

the problem ? was resolved by deleting the tables of the DTC from the original file of the car.

:D
excuse the curiosity?, but the car is fine with the same ecu ? how do you find the table of the DTC

[magi1984]

the machine doesn't turn out well, I do not think even that has 180 hp that engine
the owner of the car ? went to audi and the audi you ? refused to lay hands on it, they were told that he had to mount a stock motor and just.
obviously this guy after being cheated and having spent big money for an engine that is not ? its not want to spend money for another engine...

cos? I contacted a person that I have deleted the table of the DTC from the original file.
I explained the problem, and I sent him the file, yesterday evening I tried it, and the malfunction indicator light engine was turned off
also pulling the car the light is turned off, even if out of the sensors, the light is turned off
not ? the right thing to do but the owner of the car ? glad the problem ? resolved

the guy who made me this file ? really a monster in this sector.
I do not say who ? why? I don't know, not ? English and we communicate only via ****

[klajdin]

vabb? if he ? happy cos? !...but s? that if something happens and he is not careful he finds himself with the machine stopped and the responsibility? ? only his ?! anyway, I'd like to explore this topic.

[munro]

the magi, but if you connect the diagnosis and what are you from?? or have you not tried?I ask you, why? I think that deleting the table DTC practically the ecu also with other damage which is not segnaler? nothing or no?

[magi1984]

that's right, the customer s? glad he is happy all

[munro]

for? sorry, but learn of these crap made by others almost makes me regret being in the industry... no offense to you, for the love of god....

[mecdoc]

both versions of the TT mountain bosch ME7.5, we should compare the two maps, one with and one without a drive to see if ? can intervene, I've never done it for? this job has me intrigued !!!!!!!!!!

[mecdoc]

moderated message why does not comply with the regulation (msport)

[magi1984]

there are maps attached in this thread so I can't give you anything

[mecdoc]

I see that there are no attachments!
I thought that you had read the ecu of the car in question

[msport (exil77grande)]

moderated message why does not comply with the regulation


the regulation strictly prohibits such a thing so let's see, to comply with simple rules.

[mecdoc]

excuse me but I did not know it!

[rego88]

but we are sure that the guy who made you the file you have deleted all of the dtc?? or only those relating to the drive of the stage???

[magi1984]

covering the map to the distance of time and with a p? experience in pi? I can say that it only deleted the dtc that I had reported I of the drive phase