beppe.c

hi all, today I checked quickly the car in question for a strong game on the wheel front left side I saw that in the game ? due to the support cradle,I had to immediately ridarla to the customer that was passed to the flight to know if he could turn,so I could not see well if the substitution I have to dismantle the cradle or replaced by removing just the screw.give me the quest info?I need to know to get organized based on the time needed for the replacement.
thanks

anniver

But the head ball or the gommi......it changes the entire arm

beppe.c

perhaps I spiegto well.in the cradle we are of the rubber pads,the arms and all the rest are ok c? the game in those rubbers.

anniver

Then to replace them you need a press and are affixed

beppe.c

Then to replace them you need a press and are affixed
a press?the cio? should I put the cradle on the press to get the support?mmmmmm
you've never replaced'

raptor

hi all, today I checked quickly the car in question for a strong game on the wheel front left side I saw that in the game ? due to the support cradle,I had to immediately ridarla to the customer that was passed to the flight to know if he could turn,so I could not see well if the substitution I have to dismantle the cradle or replaced by removing just the screw.give me the quest info?I need to know to get organized based on the time needed for the replacement.

beppe.c

anniver

No I have them or seen them, and fun......

cinqueturbo

I had Made of the bushings, teflon to delete all those silent-block..
Then no need to remove the scessi you change great in..

beppe.c

03-04-2014, 20:09

through the sixteenth century!then not c? need for disassembly of the cradle?

munro

no need to get off the cot....
you just have to have a good extractor....

beppe.c

I had Made of the bushings, teflon to delete all those silent-block..
Then no need to remove the scessi you change great in..
I believe that the silent blok serve to absorb vibration,shock, etc....you say that with the bushings fixed does not create these problems?

anniver

If all goes smooth you can get the

anniver

If all goes liscil on or off you should be fine

cinqueturbo

I believe that the silent blok serve to absorb vibration,shock, etc....you say that with the bushings fixed does not create these problems?

It or done more? 4 cars no problem and noticed vibrations, thumps, etc.
in the pi? satisfied customers..

beppe.c

thank you for the info guys!now I have ordered the parts but in the next, I do the bushings.

anniver

In that the material must be made??

beppe.c

I had Made of the bushings, teflon to delete all those silent-block..
Then no need to remove the scessi you change great in..
are teflon,I imagine that in the centre there will be a cup in the steel where it enters the pin for fixing and outside a steel frame that comes into contact with the cradle or I sfaglio?

cinqueturbo

are teflon,I imagine that in the centre there will be a cup in the steel where it enters the pin for fixing and outside a steel frame that comes into contact with the cradle or I sfaglio?

remember that the simple things are always the best..
bushing simple snap as ori, a washer that locks all of ori..

beppe.c

the central pin of the fastener must be in direct contact with the teflon???the teflon must be in direct contact with the cradle???

anniver

Its strength but without the press how to remove the old and put the new one??

Pin spacer, and nut and see if it comes out

beppe.c

Its strength but without the press how to remove the old and put the new one??

Pin spacer, and nut and see if it comes out
I will try and I think that will come.thanks again

anniver

And how did that go ??

beppe.c

we put the d agreement with the customer to take it.