I try the photos inside the lexia3

[pinotec]

hello to all
someone kindly could postarmi pictures of the inside of the lexia 3.. especially near the connector side obd rear?
I lost a resistance or a capacitor smd... and I do not find it more ..and now the tool does not detect more ecu.

[tecnoracing]

the chassis is ?

[pinotec]

hello techno
the chassis is.. tested on 3 machines... and on all 3 the same defect

[giarras]

I found something see if it goes well, are a bit blurry
http://www.sendspace*****/files/twoj55

[pinotec]

hello giarras thank you for the photos and congrats on the new charge
looking on the net I read that it replaced the ram,but I don't understand if you need to my problem, or the problem that is not recognized by the pc

[giarras]

hello giarras thank you for the photos and congrats on the new charge
looking on the net I read that it replaced the ram,but I don't understand if you need to my problem, or the problem that is not recognized by the pc
thanks,......which sw do you use? we see a p?

[pinotec]

lexia 346.22 and pp2000 23.25

[giarras]

lexia 346.22 and pp2000 23.25

then I do a tour ok?

[pinotec]

ok thx giarrass

[giarras]

ok thx giarrass

see if you can be helpful.
http://www.sendspace*****/files/wv65eh

[pinotec]

thanks again giarras you have been vanche fast...
tomorrow I update the lexia.. but according to you,so I solve my problem?

[giarras]

thanks again giarras you have been vanche fast...
tomorrow I update the lexia.. but according to you,so I solve my problem?

in the meantime, try to update maybe using xp, any dediamo what can? to be a success.

[tecnoracing]

azz, the anti-virus is blocking me the website I try to turn it off

[giarras]

azz, the anti-virus is blocking me the website I try to turn it off

download with 1 Browser, you will see that the v

[tecnoracing]

you are able

[giarras]

you are able

ok do everything, see, or maybe use xp. let us know hello and good luck.

[pinotec]

*tecnoracing but you also have the same problem?

[tecnoracing]

I had about 2 cars but I tried on another it seems that it is working but my version and the LEXIA3_V45 now or tried to download Lexia3 Update (v347.99) what we have here
but when istallo asks me for the activation code which I don't have

[tecnoracing]

I wanted to install this lexia on another pc while I have 2 a citroen c4 picasso and c3 in the workshop I stastarlo

[tecnoracing]

does anyone know how to turn it on the version that I had previously before you istallava and after it is activated using the keygen this asks me for the activation code already from the installation

[pinotec]

today, if I have 2 minutes I can confirm....
anyway, I also found the sw psa interface checker.. to upgrade or downgrade the firmware to the interface
I tried to riflashare my with the firm 4.2.2 (they say that is the most stable)
I just plug it in to the machine.

[tecnoracing]

but this version how to install it asks me for an activation code and I do not go ahead

[tecnoracing]

giarras where do I get the pass ?


ok do everything, see, or maybe use xp. let us know hello and good luck.

[pinotec]

have you tried to enter your pass txt.... perhaps the same

[tecnoracing]

is there? tried to be letters and numbers, someone will have to? have them

[giarras]

is there? tried to be letters and numbers, someone will have to? have them

passw:scary01 - could serve to others.

[giarras]

have you solved? we give news, thanks.

[pinotec]

giarras I at the moment I have problems with the interface even longer detected...
I believe that now is the time to get it again
when we took that has never worked 100% :(

[spiki_x]

someone can tell me if the lexie chinese are upgradable to diagbox 7.xx ?
I've updated the original and I think that if the hardware and an exact copy should be possible.
Has someone tried it?