View The Full Version : info galletto v54
hi all I recently seen on the network the appearance of the cock v54 clone, has anybody tried it? in the protocols ? including the fiat freemont with edc 17c49?
frantik3
25-03-2014, 17:35
to do that the ecu uses the protocol jeep with the 53 and the same protocol
but on the instructions of the 53 tells me that the jeep mount the ecu edc17cp27 tc1796 - Internal Flash
frantik3
25-03-2014, 19:26
only that my client with the 53 says to use the protocol jeep, however, the 54 reports that mounts to a edc17c79
understand just review the customer control with esi the exact version of the control unit.
but the second t? it pays to buy the 54? ? a valid instrument?
frantik3
25-03-2014, 20:41
understand just review the customer control with esi the exact version of the control unit.
but the second t? it pays to buy the 54? ? a valid instrument?
there are some cars and many of the protocols in the pi? but if you and a couple of cars that you need to do more? it's not worth it
thanks so much for the clarifications you've been very kind:rolleyes:
I recently bought the version v54 ? someone told me that you could install on windows8, but I have not succeeded, someone ? to the need? can it be done?.
fuorigiri12000
09-04-2014, 15:20
I would like to know if with the 54, there remains the problem of having to install it on xp, and bring the date 2013.
Thanks
I would like to know if with the 54, there remains the problem of having to install it on xp, and bring the date 2013.
Thanks
from what I am understanding to the v54 no
fuorigiri12000
09-04-2014, 17:01
Hello mafani, is there a way to install the V53, without having to bring the date for the 2013?
Thanks
Hello mafani, is there a way to install the V53, without having to bring the date for the 2013?
Thanks
ec who sells the solution to the v53 to make it work without changing the date and also on vin7, (for the avoidance of doubt it is not me)
blackwolf76
09-04-2014, 22:58
It depends on the v54 speak. I have the eu version and it works without changing the date on win64, just run it in compatibility? xp and as administrator. The soft included ? the end of 2012 is the same as that found on the v53 china.
from what I understand around the foreign forum, the v54 china would be a v53 which have fixed the compatibility? with the new OS, and the history of the date.
passion engines
10-04-2014, 11:12
Hello, with the presentation of the v54 have in part solved and simplified the installation, c? a script to install to make it work on win 7 on win 8 does not work in fullscreen? of compatibility. the sw that provide the v54 on the v53 does not work obviously made to sell the new tool, it has the same problems of the v3 quality To it so to speak. Still today ? preferable a good v53 box smooth with the right components and pu? also work on win 7 32 and 64-bit.
For the people who work there very much and especially on a new vehicle, there is nothing better than the original tool.
frantik3
12-04-2014, 09:40
My V54 works safely with 7, 32 and 64 initially worked with xp and 7 was not stable then three months f? the seller has sent me an update and now it runs quietly even on 7!!! And short-term ? in the test phase, mander? update 2014!!!!
blackwolf76
12-04-2014, 09:46
But you are talking about a driver update or software??
frantik3
12-04-2014, 10:07
Software!!!!!
I mand? the sw self-installing 400mb pi? or less!!!
passion engines
12-04-2014, 11:42
My V54 works safely with 7, 32 and 64 initially worked with xp and 7 was not stable then three months f? the seller has sent me an update and now it runs quietly even on 7!!! And short-term ? in the test phase, mander? update 2014!!!!
Hello, have you checked if you have difference of car + in your v54 compared to v53?
Hello, have you checked if you have difference of car + in your v54 compared to v53?
I'm curious if I can make a txt file with the list of available drivers
at least the list of the tricore....
blackwolf76
12-04-2014, 14:29
Strange, together with the v54 to me have given a folder of the soft not to install... just launch the exe.
Errecinque
12-04-2014, 15:36
In view of the countless ads and different prices of this cock can you? know from the pi? experts what you need to check in order to have a good product? Or are they all the same? Thanks
ducati83
12-04-2014, 16:30
I tester? one short at a great price.....you do? know.....
frantik3
12-04-2014, 19:16
for example, have been implemented in the ecu's in the boot mitsubishi ecu type exchange smart made a month ago!!!!
and also in the tricore added units type the freemont!!!!!
and other control units 53 are in the boot and with the 54 in the serial I have them both and I can tell you that there are differences
passion engines
12-04-2014, 22:58
Hi Frantik , the question was to get some perplessit?, I have no doubt of your sincerity? but you don't need to post documents, then you can also download from the official site, the tprot 08-10 ? also included in the v53 maybe your could be 12/2012 instead of 09/2012......
frantik3
13-04-2014, 00:10
Hi Frantik , the question was to get some perplessit?, I have no doubt of your sincerity? but you don't need to post documents, then you can also download from the official site, the tprot 08-10 ? also included in the v53 maybe your could be 12/2012 instead of 09/2012......
If you tell me how to download them from the official site you will do me a pleasure because they download only the list, but not the documents
however, by making the change of the smart and looking at the update of the official website should be updated 04/13
passion engines
13-04-2014, 20:47
frantik3
13-04-2014, 20:52
Software screen colors with eobd 2013 different from the other screens color
Hello, I answered you, so why? I remembered that you had tool golds, and several of my friends have tool ori and from them during the update, the update also documents, however, if your exe ? 4,12, or 4,15 Mb likely that you have a 12/2012 always that on the screen of the sw does not come out 2013....if ? so You're right.....
the tools the original I sold now I have other tools original but not the cock
passion engines
13-04-2014, 20:56
Software screen colors with eobd 2013 different from other screens to coloriAllora you are right You, you're among the very few to have this tool if it is in the midst of these things where it comes from...:)
frantik3
13-04-2014, 21:51
I can only tell you that I have taken in kiev (ukraine) personally by my brother-in-law and that of them when I went to visit my parents
ducati83
27-04-2014, 17:15
the cio? you have the screenshot of the software written 2013?
Errecinque
10-05-2014, 22:57
Given that I am a neophyte in this field and that of the cockerels so far I have never seen (I've only used mpps), I get the next week a v54 (at least cos? ? the description and the seller told me that ? built in Portugal. To you is that it is the true origin?
And since I got it to be able to defappare a zafira cdti 150cv edc16c9 of you who know already? this interface is also only a serial port or you have to make it to the tour? (In this case, it will have to? study well but as the saying goes, "c'? for the first time "
blackwolf76
11-05-2014, 00:29
Those in the serial write only and you could also use mpps. On the tour you can do in the bdm.
Errecinque
11-05-2014, 21:49
Those in the serial write only and you could also use mpps. On the tour you can do in the bdm.
Excuse my ignorance, but with the cock you can not work at the counter?
blackwolf76
11-05-2014, 22:40
The wing nut in the bench also works with the bdm and jtag given that if you have the full version ? equipped with everything necessary for work by locking on to the bdm port of the control unit.
what do you think between ktag and v54 gal.
Errecinque
15-05-2014, 11:50
what do you think between ktag and v54 gal.
I get next week a v54 (at least cos? ? the description and the seller told me that ? built in Portugal. To you is that it is the true origin?
How much are you paying?
Errecinque
18-05-2014, 10:52
I don't know if the regulation allows you to say
you wondered, just to see if it might be really invoice european
Errecinque
19-05-2014, 20:39
you wondered, just to see if it might be really invoice european
The seller told me that ? party today, as soon as I get I'll post a p? photo. Thanks
ducati83
19-05-2014, 22:55
I have taken some and I have to say that they are really well made and go great...I don't think they are assembled europe portugal italy.....so are all chinese....for? up to now I've done everything and it works great....
keep us informed....maybe we compare them as soon as you arrive.
I don't think are assembled europe portugal italy.....so are all the chinese....
Not ? cos?, believe me. Change the quality? some of the things, starting from the components.
ducati83
20-05-2014, 10:12
look, I have them open all the time I have to tell you that differences except that in the cover I have seen.....of course, another important difference was the price....and, you say? with my I made a edc17 kia in the boot that was not in the other.....so basically they are all the same....maybe c'? to control the quality? of the welds, but the components inside are the same....I see if I can get you photos.....of my I can do the Portuguese have to see me...
passion engines
20-05-2014, 13:42
Not ? cos?, believe me. Change the quality? some of the things, starting from the components.
I fully agree, there are tools that are completely different pcb with new components and also better than the golds. but these are not so? easily. Perhaps Ducati83 has only seen clones even if they were working but low quality
how do you see if a clone and quality I have not I see them all the same
alfonsoh
21-05-2014, 23:51
I know there are three quality, one chinese, one in eastern europe and in Portuguese also known as the european quality range from the lowest to the highest in order
passion engines
22-05-2014, 00:37
Often responds to heard and in a few respond with knowledge of the tool, about the project, the type and quality? of the component, the assembly manual or automated, at the end put this to the test...Even the best tool can? out defective....
Errecinque
22-05-2014, 08:01
ducati83
22-05-2014, 09:34
I answer to Ross and passion motors: I have seen clones that some exact copies of the originals,working with the ori, I can say that the clones though enclosed in boxes is better or worse than the invoice inside had no difference, if not in quality? of the welds and expertise in composing.
for the quality? of the components ok there can be but believe me that the ones that work and that are presented in the case type ori or the more erratic components are the same...the price is the assistance....often sell them without the necessary installation procedures and reset and do not go in any way but who sells it with the appropriate changes gives you a product that goes well, and works on any pc,but then again they all speak the same language, even if I have seen assembled in italy...but always with the same material of asian origin....
now if we are to doubt of a relay, bosch is not the end it is more in the sense that in my part to say that the bearing of skf in italy of the original are there, why? by the time of campania have trafficked in fake....for? if we think so there is no ir? a gucci shoes or prada original.......
passion engines
22-05-2014, 11:09
Hello, surely you have noticed that the tool ori and sealed with two-component and various resins, for the components safely purchasing them online and in specialty shops, and with many components, choose the tolerances of the work and the quality? of the same, for the pcb mounts use the asian one and many are not evil, then c? those who get the pcb printed in italy or Eu and you have a good assembly then finish with a good programming of the chip ? a world that is so? vast that ? difficult to understand and to say they are all the same......
I answer to Ross and passion motors: I have seen clones that some exact copies of the originals,working with the ori, I can say that the clones though enclosed in boxes is better or worse than the invoice inside had no difference, if not in quality? of the welds and expertise in composing.
for the quality? of the components ok there can be but believe me that the ones that work and that are presented in the case type ori or the more erratic components are the same...the price is the assistance....often sell them without the necessary installation procedures and reset and do not go in any way but who sells it with the appropriate changes gives you a product that goes well, and works on any pc,but then again they all speak the same language, even if I have seen assembled in italy...but always with the same material of asian origin....
now if we are to doubt of a relay, bosch is not the end it is more in the sense that in my part to say that the bearing of skf in italy of the original are there, why? by the time of campania have trafficked in fake....for? if we think so there is no ir? a gucci shoes or prada original.......
I do not agree, and the reason for my thoughts with a question: how is it with my v48 european I've read, and written to the drive that the various 48,50,51 and 53 have not read or planted in scripture? :)
giuseppe1374
26-05-2014, 08:36
Hello, surely you have noticed that the tool ori and sealed with two-component and various resins, for the components safely purchasing them online and in specialty shops, and with many components, choose the tolerances of the work and the quality? of the same, for the pcb mounts use the asian one and many are not evil, then c? those who get the pcb printed in italy or Eu and you have a good assembly then finish with a good programming of the chip ? a world that is so? vast that ? difficult to understand and to say they are all the same......
the problem ? the firmware of the micro...
I can only tell you that I have taken in kiev (ukraine) personally by my brother-in-law and that of them when I went to visit my parents
Hello, I also pm you might have a contact this seller?
ducati83
26-05-2014, 12:44
you can't?.....regulation...anyway just rely on someone serious and you'll see that the cock will? the great....
marco_evolution
26-05-2014, 16:45
I've seen several of these cockerels are the ones that circulate more,some well-made that you can't? deny that they washed as the gold almost,others that should not be for nothing, and others that work at the met?..I share that to those who buy, it should be quiet if he finds the right person, who understands and that maybe replaces it if it does not.
passion engines
26-05-2014, 19:24
marco_evolution
26-05-2014, 20:36
Hello passions solution that you could adopt to fix the micro of this tool and make it decent, is there?
passion engines
27-05-2014, 01:24
exists but is the game worth the candle??' I always say the ones from the box smooth are among the best.......
marco_evolution
27-05-2014, 07:29
Passions the engine instead of the new tool v54 asian origins, what do you think..You had the chance to test it? From what I read around is able to run also on windows 7..Speaking of micro processor in this sar? changed the string and pu? be comparable to the one that now runs for more than a year of origin eu?
Errecinque
29-05-2014, 15:47
Just arrived (I'm a p? confused....) I'll post a few photos of some advice
797979807981
Excuse me ? escaped sending... I said....any advice on what to check for to know if ? a good version? ? the first time that I see a 1 so at this time we do not understand a bat Now I'm sitting under study.
ducati83
29-05-2014, 16:25
test it ? the best way, but above all, you can install it easily?
passion engines
29-05-2014, 16:47
Passions the engine instead of the new tool v54 asian origins, what do you think..You had the chance to test it? From what I read around is able to run also on windows 7..Speaking of micro processor in this sar? changed the string and pu? be comparable to the one that now runs for more than a year of origin eu?
Hello, ? a tool for many cases worse than the v53 that the difference is in the number of tool enabled with sw with scritp, all the tools in the location component U2 have a capacitor are to be thrown away, open and controlled.
passion engines
29-05-2014, 16:49
797979807981
Excuse me ? escaped sending... I said....any advice on what to check for to know if ? a good version? ? the first time that I see a 1 so at this time we do not understand a bat Now I'm sitting under study.
Hello, open the tool and see if you can see the U2 component, and what type?....
Errecinque
29-05-2014, 17:43
7982
I opened it here is the photo...hope for the best!!! The fact that the power supply is not there ? what is normal? Or usually ? understood?
passion engines
29-05-2014, 18:58
have you had a look ? as I thought try it right now on edc15c7 kline, as a component U2 has the classic capacitor of the quality , I hope that it works, I have serious doubts.
marco_evolution
29-05-2014, 19:19
Exact passions, and the last I see also in the edc16c39 kline..
Errecinque
29-05-2014, 23:17
And b? I must have made a fine purchase...but why? I have to find a power supply, why? in the package there? as there are very detailed instructions....in fact, I wonder if the power supply serves only for the purpose of working at the bench (in the serial is wrong with the power supply via USB?)
marco_evolution
29-05-2014, 23:26
only tour or bdm-jtag boot tricore... the rest is not needed..Preferable power supply 12 v and current in >1 ampere
passion engines
29-05-2014, 23:26
you to work at the desk do you need ? a common power supply 12v 1 Amp that you find in stores easily
blackwolf76
29-05-2014, 23:29
The alimnetatore you need only for the bench, I use a 2nd, and it's good, it just has to be of good quality.
About the rest I would say try it out and see how it goes, do not be depressed before using it... sometimes you even have a positive surprises.
I have a v48 chinese that goes na beauty and a v54 eu that do not inspire me any confidence. The second cost me a bang pi? the other that I have failed on any car, only on some audi 15p that I can go, what for? do it with mpps...
passion engines
29-05-2014, 23:37
The alimnetatore you need only for the bench, I use a 2nd, and it's good, it just has to be of good quality.
About the rest I would say try it out and see how it goes, do not be depressed before using it... sometimes you even have a positive surprises.
Errecinque
30-05-2014, 00:02
Thanks guys, now I sleep more? serene...I just have to learn how to use it. You do? you know, and we ridisturber? for any clarifications. Goodnight
Errecinque
30-05-2014, 08:35
I installed only the file setup.exe that has copied all the files including the various instructions in the folder c:FGtech. I plugged the usb connector into the tool and the pc, and I requested the driver that I picked up from the folder fgtech new driver. in launching? the program "obd" as the liaison for that meeting on the desktop nothing happens. Now my question ? this: the instructions include copying the update folder on the desktop and do the upgrade procedure. I think it is for? that phase I should not take it into consideration......right? The date then I have to put her in particular? even if in the proclamation of sale saying that you do not need to put the date back.
sportknight
30-05-2014, 08:48
if you do not connect the machine the program is not part of it,also on some of the tools you need to first connect it to the car and connect it to the usb and then open the program
in serial you will not need the power supply because? it feeds by obd
Exelion1986
30-05-2014, 12:39
I installed only the file setup.exe that has copied all the files including the various instructions in the folder c:FGtech. I plugged the usb connector into the tool and the pc, and I requested the driver that I picked up from the folder fgtech new driver. in launching? the program "obd" as the liaison for that meeting on the desktop nothing happens. Now my question ? this: the instructions include copying the update folder on the desktop and do the upgrade procedure. I think it is for? that phase I should not take it into consideration......right? The date then I have to put her in particular? even if in the proclamation of sale saying that you do not need to put the date back.
but what version of windows do you use?
Errecinque
30-05-2014, 20:35
Ok I was able to open the program with the tool connected to the USB, I uninstalled everything and reinstalled with the date of the PC on 1 January 2013 and it now works. Now the question ? all the times that I use them I have to first return the date to this day? Then at the opening of the software warns me that c'? an important update to do. Of course not do I have to do the update procedure as described in the instructions right?
Exelion1986
30-05-2014, 21:19
when I use it off anti-virus and internet connection, I connect obviously the tool, and using win 7 use the launcher appropriate that automatically moves the date (even if it seems to me not to do it always)
the update that offers ? to do
Errecinque
30-05-2014, 23:21
you to work at the desk do you need ? a common power supply 12v 1 Amp that you find in stores easily
Then you can? also colllegare with a jack and 2 terminals directly to a battery?
passion engines
31-05-2014, 10:20
Hello Errecinque, I'd recommend a stabilized power supply, adjustable, with time you will understand that ? need, your solution, leave it lose, with a standard power supply 12v 1A you the cables with less than 10 euro
Hello, quindirileggendo the discussion between the v53 and v54 to buy the last spending a bit more? but by eliminating the many troubles regarding the installation, which was about the v53. As reliability? and durability what do you think? I have seen some v50 that from one day to the other, the computer did not detect pi? the interface: almost died!!!
blackwolf76
01-06-2014, 11:58
On the v48/51 solves quite easily the problem of the "death".
have you had a look ? as I thought try it right now on edc15c7 kline, as a component U2 has the classic capacitor of the quality , I hope that it works, I have serious doubts.
why? in the position u2 which component we should be instead of the capacitor to be good?
passion engines
01-06-2014, 18:43
On the v48/51 solves quite easily the problem of the "death".
you could give me some indication on how to solve or direct me to the discussion here ? was given the solution?Thanks.
blackwolf76
02-06-2014, 00:28
If it ? talked about in a discussion a few days ago... I don't remember where, try searching.
I trawled around but I can not find my case ( my ? 1 led). Sequalcuno remember the discussion me the pu? suggest? Thanks and sorry for the off topic. I hope that the v54 does not have these problems!!!
blackwolf76
02-06-2014, 09:10
https://www.professionalchiptuning.net/showthread.php?6479-errore-kernel32-non-si-apre-il-software&p=92845
thanks for the post, but what I'm having, when I insert the usb plug and the food, in the resource manager does not detect anything!!! No error, nothing, totally absent.
marco_evolution
02-06-2014, 16:45
Just tried on a pc? and with which operating system..The first time I hear such a thing..I would Not like you burnt the ftdi chip :(
passion engines
02-06-2014, 17:17
thanks for the post, but what I'm having, when I insert the usb plug and the food, in the resource manager does not detect anything!!! No error, nothing, totally absent.Then, one thing at a time.......the tool must also be detected without the power supply in the device.......no device with a point ?
nothing worked, and from one day to the other no more?: proceedings of reinstalling drivers and usbfix I know them all from time to time, but in this case the pc does not detect the presence of the interface includes, no ? or another as if it was burned. ? the second that I saw with the same problem ( on different pcs)
passion engines
03-06-2014, 10:14
prover? but I have serious doubts about: me, ne ? happened another the same way! From what I understand maybe skip the processor that converts rs232 to usb!
Errecinque
04-06-2014, 00:35
I tried a little while ago this is my v54 that I understood having regard to the previous posts will not be of great quality? (according to the seller ? the Portuguese) . However, the software opens the tool is recognized and I try to read in the serial (I know that is made in the bdm...) is blessed zafira 150 hp of my friend for defapparla. Connect the serial cable to the cock and to the obd and the USB cable to the computer. I select the driver (edc16c9 or edc16c39? This ? the problem, in the diagnosis tells me c9 but the numbers 0281014024 and 1037383479 seem to correspond to a c39) I click ecu data and are out of these numbers by c9 or c39. Now with c9 interrupts me immediately reading and tells me the ecu wrong while with c39 notifies me that a bit? only one of the two maps (and here I ask what that means) . The d? ok d? the name of the file and the PC hangs immediately I have to unplug the cock and the battery of the pc to restart it. Who better knows the cock I can? say if ? a normal behavior when it comes to an ecu unreadable via serial? Or the tool can? have some problem? THANKS
blackwolf76
04-06-2014, 00:44
Usually when the driver ? wrong should not crash the pc, a headache that goes needs to give you the communication error.
Try to throw as soft as the administrator, and mode? XP sp3 (right button on the link) and see what happens. Anyway if a C9 the cock of the law in the virtual one, while if a 16c39 should read it without problems. Anyway, test it on another car before you condemn it.
Errecinque
04-06-2014, 08:04
Usually when the driver ? wrong should not crash the pc, a headache that goes needs to give you the communication error.
Try to throw as soft as the administrator, and mode? XP sp3 (right button on the link) and see what happens. Anyway if a C9 the cock of the law in the virtual one, while if a 16c39 should read it without problems. Anyway, test it on another car before you condemn it.
Thanks....I'm the only admin of the PC,I assume that you start already? in mode? the administrator and I have xp sp3 as s.or.....I don't understand your advice can you tell me more x please to implement it correctly? And then what the law is in a virtual machine? Sorry eh but I have to learn still a lot. Thanks
marco_evolution
04-06-2014, 08:38
I confirm that by those numbers you posted ? edc16c39 read file 2 mega..Try a protocol edc16c39 also another brand/car type fiat-alfa..read time about 50 min
blackwolf76
04-06-2014, 09:22
There enters nothing that you are the only admin of the pc. ? the mode? run with advanced permissions that you need, and you launch it with the button on the right side.
marco_evolution
04-06-2014, 10:02
if the sw part there is nothing to make system admin.
Errecinque
04-06-2014, 12:59
Thanks....I'm the only admin of the PC,I assume that you start already? in mode? the administrator and I have xp sp3 as s.or.....I don't understand your advice can you tell me more x please to implement it correctly? And then what the law is in a virtual machine? Sorry eh but I have to learn still a lot. Thanks
I confirm that by those numbers you posted ? edc16c39 read file 2 mega..Try a protocol edc16c39 also another brand/car type fiat-alfa..read time about 50 min
S? in fact, if you select the C9 tells you that a bit? a file from 1mega and c39 2 mega But the fact that the sw warns you for this last option a bit? only one of the two maps, which means....???? And you recommend for a complete schedule of do reading in the bdm
marco_evolution
04-06-2014, 13:22
uses a protocol type alfa fiat edc16c39 any car and let me know.
S? in fact, if you select the C9 tells you that a bit? a file from 1mega and c39 2 mega But the fact that the sw warns you for this last option a bit? only one of the two maps, which means....???? And you recommend for a complete schedule of do reading in the bdm
because this machine has all the maps repeated two times, and interpreting it in a serial it read only a part, to make a complete reading you have to read it in the bdm as it tells you the sw
ducati83
05-06-2014, 10:40
I ugoboss, this you should do it in the bdm, to me some of the time ? happened and call it a day perhaps for this reason, so to avoid problems I'd recommend you to open and do a full read, then you can also use the file read in bdm of the flash to write to a serial port and you're quiet in the case of blocks.....I know that the ecu is located in a very inconvenient but I would lose that half hour to do everything....
Errecinque
08-06-2014, 01:12
Ok the ecu in question ? removed and opened, and before connecting the all seen that ? my first time in the bdm does not want to risk the ecu. Therefore, first of all I ask you why? the manual files are installed in the equipment you speak of use the 12 pitches of the port bdm, while I have seen other instructions for edc16c8 only use 10 and in fact the flat cable supplied it seems to me (now I don't have one on hand )have 10 and not 12. Then? Childbirth, however, from the first to the left looking at the ecu from the opposite side to the comb.
Ok the ecu in question ? removed and opened, and before connecting the all seen that ? my first time in the bdm does not want to risk the ecu. Therefore, first of all I ask you why? the manual files are installed in the equipment you speak of use the 12 pitches of the port bdm, while I have seen other instructions for edc16c8 only use 10 and in fact the flat cable supplied it seems to me (now I don't have one on hand )have 10 and not 12. Then? Childbirth, however, from the first to the left looking at the ecu from the opposite side to the comb.
parts from that side to them, but it balances, or you have the e xxx.
Errecinque
08-06-2014, 12:06
parts from that side to them, but it balances, or you have the e xxx.
this ? the pattern of pitches BDM give me with the V54.
8034
and this ? the pinout of the galletto v54 (if someone can? tell me what is the meaning of the various terms is a favor to me and I think many others)
For example, the 2 gnd in parallel on the bdm port of the ecu where are they?
8035
blackwolf76
08-06-2014, 23:26
To connect with the cock in the bdm with the template and the related schedule spring (for bosch has a 10-pin) you have to connect the starting to the right of the first image that you have put in this last post, considering that you have to put in the intermezzo of a special adapter with power supply provided with the cock, and the e xxx with needles towards the outside, and the connector and the inside of the template.
Errecinque
10-06-2014, 20:23
To connect with the cock in the bdm with the template and the related schedule spring (for bosch has a 10-pin) you have to connect the starting to the right of the first image that you have put in this last post, considering that you have to put in the intermezzo of a special adapter with power supply provided with the cock, and the e xxx with needles towards the outside, and the connector and the inside of the template.
But sorry if I e xxx spring 10 pin then 2 jump seats in correspondence with the 2 free pitches right? The template I should still get it and if, as I think the needles are still to be paid as I think I need to make sure that they correspond only to the pitches shown in the picture?
blackwolf76
10-06-2014, 22:17
you remain disconnected from the pin to the left frontae you. the e xxx you get 10 points and the control unit has a total of 14 pitches.
Errecinque
13-06-2014, 22:10
you remain disconnected from the pin to the left frontae you. the e xxx you get 10 points and the control unit has a total of 14 pitches.
But just to not do stupid things why? in the instructions of the cock they see that solder pin strip on 12 pitches, and attach an adapter bosch but with side entrance bdm 12-pin, which becomes 10 output towards the cock differs from that given in the endowment which has 10 from both sides ?
blackwolf76
14-06-2014, 00:15
You'd have to ask the people who produce it... The procedure ? that.
Errecinque
14-06-2014, 01:23
After a lot of thinking and with the c..or close ? gone!!! Read to the end, the flash 2048 jb eeprom 8 kb. Now let's write!!!!
At the beginning of the write to the message chk calculated in writing you want to fix it, I said no. I did right?
blackwolf76
14-06-2014, 01:59
If you have changed the file with a soft that calculates automatically, type the titanium does not need it to calculate the rooster, otherwise it is best to do this. I do always calculate.
Errecinque
14-06-2014, 03:16
If you have changed the file with a soft that calculates automatically, type the titanium does not need it to calculate the rooster, otherwise it is best to do this. I do always calculate.
Then my goal was to defappare and I tried with the flash file read with galletto. Then I wrote directly always in bdm the first time, saying he did not correct the chk and writing ? come to a good end. Come to doubt the I have rewritten telling him to fix the chk and gave me "error in micro" . I open titanium took the file processed with the time calculation chk saved file mod and rewritten in the bdm without telling cock-of-the correct and completed re-writing. B? between a few hours to see if the car part. PS : at the end of the write to the message "to turn off 10 sec then turn on the ignition and wait for 10 sec before continuing, " which one ? the exact procedure since giving ok you ref? wait a few sec and then tells you again "turn on the ignition? " (that was already? on " thanks
blackwolf76
14-06-2014, 22:24
time does not calculate cks, you can make the cock that anyway the fabsolo if you write the flash and not the complete file. after each write, it is better to wait 10 seconds to allow time for the flash to store the new data, from here, the switching on and off ome by the procedure of the program
Errecinque
15-06-2014, 00:58
I'm so pleased!!! My first bdm ? went to perfection, the zafira ? the game on the first shot!! Thanks to all for the valuable advice.
guys someone ? so kind of you to post the schema of the adapter cmd for cock v54 ? thanks
Exelion1986
06-05-2015, 15:56
even if you not posting it you may still see it because of the few posts that you have...
however, do you mean the wiring diagram?
thanks a lot , anyway, if you can send me a ***** I don't know if you can post the***** ..?
thanks again
solved, thanks again exelion
Exelion1986
08-05-2015, 12:40
now that I think about it, you should have all in the documents of the rooster, however you explain that ? easy
the flat cable pi? long to be connected between the cock and the adapter into the jack say vertical
the cable to the pi? short link between the adapter and schedule
if you need to make the ecu bosch power by using the adapter, connecting the special cable to the socket with 6 pins in a row
hoping not to be OT, but the cock v54 ? compatible with win 7 64bit ?
I have also installed on 64-bit!
Hello, do not trust this version of the tool ? the worst that they have ever produced..............
my it works very well! I made a version with the components improved.
your ? how many of those with some mod components, but you are very far as functionality? and reliability?............
Of v54 there are so many versions, I don't know how can you say that they are all poor... I Doubt you you have tried them all. It also takes a fortune in these things, I have a v48 of economic ones, and that has never failed me a sc
Obviously, you can't expect who knows what, but the heck with a couple of car you have paid off to the right start ? more than excellent! Before you spend 3000 € for a "similar" ? a mandatory step, then thanks to the internet, you share information about what car you can do, which you block, etc, etc, reducing even more the risks!
To clarify:
as the calls v54 or tool 0386 or tool 001 ? always the same project of hw that is identical to v53 but with different fw, the tool 0475 or v53 has the fw best of all, all of the tools with the necessary modifications to operate the hw equivalent of' ori have always the bug of the fw except the v53. In regard to hw the best that I have seen comes from a european country with a motherboard gold-plated and components of the quality? also this tool has the fw 0386, on this hw rewrite the fw of the 0475 or v53 as they call it around, do the mod to the software to use it without a problem to date, and virus and runs on all operating systems, so you'll have a tool with reliability? equal to the original.....Blackwolf76 if I say something and why? years study.........
Even with the v54
I would like to know if with the 54, there remains the problem of having to install it on xp, and bring the date 2013.
Thanks
The problem of the date ? been resolved a long time....
they say that it works on win7 64-bit
there is no need to move the clock
you my friend uses it on 7
I've installed on win 7 64bit
I've installed on win 7 64bit
I have installed it on win 7 but I do not understand why sometimes I start and I move the date to 31/12/2012 and other times not. The software I have seen that it works. The fw that is written on the sw is 0386
I heard that most of the chinese clones will not work in bdm, is that true?
You.....it really is true.
Your v48 is an exception or not?
Never tried it......I do not trust.
I have a 48 and a 53 and they work very well in the bdm, and the 53 also in jtag, tried and re-tried with several machines, but you know that 54 is less reliable.
Also my v48 is fine in bdm
Actually my cock 2 version 48, by the various post read on the forum, (from the color and from the internal components), I saw that it was a model that probably worked well, but knowing of the other, which gave problems, but I have never tried having another friend that had one as well-proven.
what do you say? which sw and better to install cones on the annex (fgtech galletto edited v1.0 + galletto win7)?.... or another sw????
perhaps replace the 2 ls14 , quartz and the two diodes nvz/zvp
Not if you used a serial port without an adapter?? In the case, is the gateway to the bdm/jtag to jump...
never used in the serial ... as it arrived and I tried it immediately in bdm , bdm cmd and gallo v48 ... read and write perfect ... this v54 even the id in the bdm ..., and is poure the components of the pcb are already good...
anyone gets an idea on the solution???
Hello Blackwolf72 by mistake I connected the rooster in serial port without adapter but I have not yet had the opportunity to try it in the bdm,you say that I have done damage safe? Or there is the possibility of me both got away? To-day I should get the template to test it in bdm.hello thanks
I know what jumps of the sure is the port, jtag, and probably along with it may not work, not even the BDM.
If so is it repairable? Do you know what components to replace?
I do not know systems to fix it, I'm sorry.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.