marelli cdc or abrites

[michele30]

Who I can give some advice on these two tools ?
what? the best one or the one from the less problems and it does everything that it says?

[amen]

I do not know the marelli cdc, but I know fvdi abrites of any trademark, a very useful tool both for scodifiche,for diagnosis and for retouch km, you talk about that?

[michele30]

you speak of the one, use it for the event?
as it goes, does what they say or in part?
I try to fiat group , can tell me also how much may be the tool ?^

[amen]

S? the use and ? a wonder, a very complete tool, I've found the 450 some time ago, by Fiat, then maybe the prices have changed, but I highly recommend it, even for professional use.

[marco]

I'm sorry but you talk about the clone Abrites or the original ?
around x forums I have seen many different opinions on the clone of the type that is roughly 40% of what it says..

[amen]

I didn't read the discussion, I speak of the clone, but I have my trusted seller who has never missed a shot, my clone works well, I even recovered a lancia y new that after a flood l electricians had transformed into a monster with the body and power units and blocks taken at random. Him instead of other tools ? managed to realign everything, scodificare and start.

[michele30]

also I have read similar things, give us some more info,

[amen]

Through the menu ? can do this, you select the car and he enters all ecus ? very intuitive and simple. I have many gadgets, but this ? the best, with the function immo off for example, in two minutes you have a scodifica is made without problems.

[michele30]

Who can tell me the price of this tool?

[munro]

I did a quick search on ****** and I have seen that ? one instrument diy-not bad for? for example, I have also seen that for each brand or group, automotive, or almost(vag,psa,etc) c'? a version of the abrites....
but if one would like the tool that does it all, the car park working???would it be possible to have it?

[munro]

for the price I saw on a site a 760 euros.....but I honestly do not know if the ori or less...and especially following to the question of which car brands....

[voglioimparare]

a colleague of mine uses it,the original I mean. coast a shot..let's talk about 7-8 thousand euros........then it is true that covers a discreet car park...

[ducati83]

I'm turning in order to understand the differences between the clone and the original, someone told me that some of the features makes them only if connected to the internet....there is?
if it's so? it was, I believe, is to discard the clone, or to understand what functions are on-line...in order to evaluate then whether to take it or not...I could also clone all over the park this car in trade costs a shot....I have a budget of 4500€...keeping in mind that the original full I have shot 17000€....sure make? the impossible at this point...
no one has the documentation to read of this tool?

[alexracing]

I know the seller of the original product,gary,very reliable, as the tool will do.

[ducati83]

do you have contacts....I have an interested customer, but we do not find anything around.
if you can post the information of the company....
thanks

[alexracing]

these are the contacts
################

[msport (exil77grande)]

do you have contacts....I have an interested customer, but we do not find anything around.
if you can post the information of the company....
thanks


as you know the rules forbid you're with us for a while and then are forced to take measures to ban for 3 days.

[msport (exil77grande)]

these are the contacts
################

alex I would like to ask to be more careful to follow our rules, otherwise I have to take action.

[alexracing]

message received,it does not happen more.

[alexracing]

hello ducati83 if you want info can contact me when you want,find me on the web on facebook also skipe

[ducati83]

no lets stay here misunderstand and I would not like to go in the wrong....of course they have their rules and should be respected....will try? the company that makes the tool original.....

[Zac]

I did a quick search on ****** and I have seen that ? one instrument diy-not bad for? for example, I have also seen that for each brand or group, automotive, or almost(vag,psa,etc) c'? a version of the abrites....
but if one would like the tool that does it all, the car park working???would it be possible to have it?

with 4,500 euros you have the full version for the whole of the car park working updated to the latest version.

[ducati83]

guys, perhaps, as for the moderators, I have not been very clear, to me, was interested in having information for the original not clone...

[Zac]

the complete, official version of all of the various interfaces and cables is around 30 thousand euros, but I'm talking about the complete configuration in which there is all codes ,keys, paintings,immo, activations, and deactivations engine components ,calibrations,diagnostics ,flash..... we also do coffee :) I don't know if you can post...... I have their price list in the hands

[ducati83]

yes, but I don't think there are interfaces that do the same thing......at least to take more than one to make immo dash eeprom....etc etc...

[msport (exil77grande)]

post cleared for personal things, there is our ***** where if we deem it appropriate to respond, otherwise, no as far as the price list of other companies we are not here to specify.

[Zac]

I'm sorry,:( however, I prefer abrites to the marelli ,I think it is more complete as a tool

[michele30]

Who is giving me some info on the L-to-use ?
Why? if I do a scodifica gives me this error ;
Operation failed invalid Key, what does that mean?

[Zac]

it means the key is not valid,you will see that it asks you for a passcode....

[giuseppeturbo]

there is a list of cars with immo off you can do

do you know if le59f the scodifica

to me would be interested in the fiat and peugeot

[Backgroop]

there is a list of cars with immo off you can do

do you know if le59f the scodifica

to me would be interested in the fiat and peugeot

First warning! Write messages in succession, and considered spam

[giuseppeturbo]

I wanted to ask for information on who owns the tool, the interface, and linked to the brand es fiat, peugeot, etc, etc, or each brand has it's own interface?

[michele30]

Hello I just got but I ask for some info around why? I lavcora comedice the people, as they say that scodifiche of 59f and hand it to me to be an error on the key-invalid key.
reading and writing to the flash ok
paintings calibration ok
I have the fiat group and hyundai

[ducati83]

but you're talking about the clone, or the ori?

[michele30]

I speak of the clone

[Zac]

I wanted to ask for information on who owns the tool, the interface, and linked to the brand es fiat, peugeot, etc, etc, or each brand has it's own interface?
You can buy both for the brand, vag,group fiat/alfa/lancia, or have more brands together.....the more you put the more coast....

[giuseppeturbo]

Then I understand that I can handle most brands with a unique intrfaccia right?

[michele30]

Yep, my abrites me this error when I open it, what should I do?
So it can't be why? not ? connected to a machine, it should open the same as the program...
what can be?
probably you don't have administrative right
without this setting the AVDI cannot work normally

normaly you can set the latency time with administrative privileges, from the controlpanel/ system/device manager / ports, then double-click over the COM-port where the AVDI is recognized , then port settings/ advanced and latency timer should be set to 1 ms

[sisco]

Hello Michele, I don't know this program but from what I understand translating with ****** what tells you the program, you should go into device manager-com port with which it should communicate the program-propiet? and l? try to set up what he is asking, all of this with administrator privileges.(but maybe we have already? tried). have you tried to also run it as an administrator? (this if you use win7) I always forget about this hassle of win7.
Hello Sisco

[michele30]

After so many and a thousand tests I found where to change this parameter, com port and then the serial usb in the settings you can? lower this latency was 16 and I have put 1 as said in the message.

[sisco]

After so many and a thousand tests I found where to change this parameter, com port and then the serial usb in the settings you can? lower this latency was 16 and I have put 1 as said in the message.

and now the program?

[michele30]

Now, after three restarts, the message is not the pi? given, then assume that everything is ok.

[michele30]

have you ever scodificato a 6jf of the punto 1.3 mjet partial with abrites?
I have tried in the e2p and not ? game, then in the flash ? went, only that it remains the light on in the framework.
to make the partial as I do?