View The Full Version : Marelli 6f3 grande punto 75hp 2008

fire

as the title suggests , I should exclude the egr on this car from the map with the classic switch value b992
I have a Fgtech mini v54 clone with for the time being, I made a edc16c31 and a sid804.
I wanted to ask, being a 2008 should be almost certainly a 6f3 and all the 6f3 son spansion?
then I have 2 cases:
if Kline wired the cock of the law 80min giving me a file, 2.5 mb
if the law can only virtual read a file that is 2mb.

Goes in the base year this thing and has nothing to do and can be CAN as Kline without having to depend on us??

blackwolf76

The cock you the law in virtual and then you write it without any problems, and file 2mb.

ugoboss

facts read in the bdm and exclude all the problems.

Alessio93

I agree with the bdm and much more? safe and fast

fire

having the cock v54 mini with no doors jtag and bdm can't do it...and if ? a 6f3, I think the bdm100 that I use for edc16 classic can make it, right?

blackwolf76

Bdm 100 is fine, of course, change the adapter.

ugoboss

having the cock v54 mini with no doors jtag and bdm can't do it...and if ? a 6f3, I think the bdm100 that I use for edc16 classic can make it, right?

I had not seen that you have the mini, at this point you should open it and see what processor it has, whether it is spansion reclose and try serial, otherwise go to bdm100.

ommy92

I had not seen that you have the mini, at this point you should open it and see what processor it has, whether it is spansion reclose and try serial, otherwise go to bdm100.
Excuse me, Ugo, but write it in serial ? safe if it does not fit in spansion?

nox

if I can be of assistance to a 6f3 of a opel corsa 90hp at the end of 2008 I read and written several times from serial port without problems, of course in the can on those not virtual but leggeil file 2 mega, 12 minutes and 50 seconds to write with the v48 that with v53

fire

I had not seen that you have the mini, at this point you should open it and see what processor it has, whether it is spansion reclose and try serial, otherwise go to bdm100.
but 6f3 ? always spansion or pu? be the classic m58? at the end what I wanted ? do not open it and try it out with the cock v54

ugoboss

but 6f3 ? always spansion or pu? be the classic m58? at the end what I wanted ? do not open it and try it out with the cock v54

the 6f3 not, it is said that the mountains are only spansion, you try to read it, and if all goes well and tries to write it, you should have no problems.

giuseppe1374

with the cock is that ? motorola is that ? spansion, the write quiet, your gpunto as all the gpunto are, you can and will give you the virtual.

anniver

or take the file to the cuts in the middle and put it in with the mpps.....

anniver

or take the file to the cuts in the middle and the programs with mpps....

fire

if ? spansion, the mpps ? better not to use it (then I have the v5)

anniver

I mpps use it safely think 48 seconi without a void to a screw

ugoboss

I mpps use it safely think 48 seconi without a void to a screw

certainly, the spansion you write with mpps, cutting the file, but do you know how many were blocked, and then after the ec has become crazy to get them back, I always recommend unscrew 4 screws and get me a backup in the bdm.

Danny

I am a little off topic, but the file in the bdm of the 6f3, how many mb ??!?
On my Suzuki the rooster reads and writes to 2.5 mb by serial....In the case of the block ? the same file to write in the bdm?

fire