Driver C2 VTR 1.4 HDI 68 Hp Simens SID 806

[Driver]

Hello to all. I read a Citroen C2 VTR 1.4 HDI 68 Hp with ecu Simens SID 806.



The problem ? that I can not find the driver in the ECM Titanium, not even manually. Someone has already? had this problem?

This ? what is in the Info the ECU:

Siemens
Diesel Common Rail
5WS40285C-T
Num HW: 9660300280
Num SW: 9653451880
SID806
S122812002A
S122812002Z
S122827001A
S122829003A
CAPN2410.DAT
------------------------------
Size: 524288 = 0x80000
Cks = 0x3BA315D

[leandro89]

discussion moved to the suitable section, be careful next time

[munro]

the specific driver, and precisoal your file of titanium in the end you need to just and nothing....one is the other one....the ones for sid 806 are all compatible with also having the same codes hw and sw....

[Driver]

For?, I saw that on some maps, the driver example: C14-4D4F the map Phase Injection ? all to 0, as well as Injection zoned (Map 1) (Boost x RPM) and Injection zoned (Map 2) (Boost x RPM).

[munro]

precisely....let it be the one that tells you the titanium...if you know where and how to intervene in all the right places in the file, the driver is not the case you need.

[cinqueturbo]

5WS40285C-T with these data to select the right driver..

[Driver]

5WS40285C-T with these data to select the right driver..

Are those drivers are like the ones I wrote above... The fact remains, as has rightly written munro, if you know where and how to intervene in all the right places of the file the driver you need. Since I'm a beginner I don't know just where to touch out of the Driver. :(

[munro]

to know what to tap, we are the damos...

[Driver]

The suspected! :) These days I try to allestirmi and understand how it works Winols. Thanks for the information! :)

[munro]

just by way of information and without having to scervellarti much you may jump directly on the map the injection times, and l? give all the diesel fuel that you want to of course, knowing how and what to do.......

[Driver]

Then just tap on those maps to get already? something? If I'm not mistaken, are those addresses:

-06DE5C
-06E054
-06E24C
-06E444

Correct me if I'm wrong... :rolleyes:

[Driver]

I also have another question. Uploading the file to ori with the Driver C14-4D4F, that should be fair enough for what concerns the maps diesel, without loading any mod file it tells me that there are already? differences from the save:

7427

scrolling in 2D is changed at this point:

7428

By various tests I saw that the driver calculates the CHK with the family, No?: 065 Simens Ford Tdci 2004. In fact opening the file without loading the drivers in the ECM, and then manually correcting the CHK family 065 goes to change the address of the screen.



PS the programmer I do not calculate the CHK automatically. :(