View The Full Version : Scodifica Total EDC15p+
The car in question ? a golf 4, to which I needed a scodifica total. Simple! I say.....but as every thing that I do ? destined to get complicated
Immo universal decoding and asks me the E2p 24c04 and flash
Meucci and asks me only the 24c04
Time asks me only the 24c04
I read the 24c04 and do it with all 3 of the software that change the file in the same way. At the end I write that made by the time
The car is not starting and the diagnosis is "the ecu locked"
I decide to read the flash but the only software that should make me the mod by flash immo universal decoding and-otocheck. immo universal decoding tells me "file not repared" and then nothing. Otocheck f? the file, fix the checksum with the ecm and I write. D? here begins the trouble.
The rooster v2 I complete the writing, tells me to turn the ignition off, but he combined a casino. Ecu Locked ? can id do the ecu it with cock it with mpps and even write in any way. Dissaldo the flash rewrite the ori, but remains locked. After having started the Rosary. I'm going to check the 24c04 and I find corrupted as well. Rewrite all golds and in fact you unlock, but from this moment, any attempt to write to the flash fails, both the serial and the dealer. Any mod to the map is not accepted.
At the end I s? the control unit has forsaken me. When he decides to turn on, in memory I find an active fault ECU internal fault ECU coding error.
In the attachment you can find the file. If someone wants to bastonarmi :p for every mistake I made, the face as well
on these ecu do I flash e2p
and everything is ok
as you can see, I tried, but nothing to do.
what software do you use for these scodifiche?
Usually just on the E2p, without problems.
I have made a changing only the flash in the obd and it is fine the only thing left is the lamp of the car on
only the eeprom . 2 bits from the tap.
only the eeprom . 2 bits from the tap.
what are the software
msport (exil77grande)
15-03-2014, 16:26
on these ecu do I flash e2p
and everything is ok
well, then, apart from letting you know that you can do it you could write how and with what to help the friend already what do you say?
what are the software
most of the time, especially on new beattle , only with e2p was not successful ,
well, then, apart from letting you know that you can do it you could write how and with what to help the friend already what do you say?
not that I am capable but the soft do the job , I process them with immo universal and seen that he says have already? tried with that soft and recalculated CHK and not ? went to a good end I don't see why make them repeat a procedure already? made
not that I am capable but the soft do the job , I process them with immo universal and seen that he says have already? tried with that soft and recalculated CHK and not ? went to a good end I don't see why make them repeat a procedure already? made
I CHK I only recalculated on the flash is not on e2p
I CHK I only recalculated on the flash is not on e2p
only the flash needs CHK
? exact your procedure
well, then, apart from letting you know that you can do it you could write how and with what to help the friend already what do you say?
Msport, if you remember I also called you Thursday? afternoon.
But how come every time that I wrote the flash crash? Perhaps because of the e2p had already been changed?
only the flash needs CHK
? exact your procedure
But immo universal decoding, you f? do the flash? or do you d? error
because of d? error?
I have not tried your file but I repeat I usually process e2p and flash
now it's not? if this error ? a problem of soft or files anyway tonight when I get home I try to process the files that you posted
and you d? info about
dvdtuning
15-03-2014, 20:20
You on the vag you can do is coupled only with e2p, immo universal works then c'? immo bypass edc15 that even the fa but not always the center.
But immo universal decoding, you f? do the flash? or do you d? error[/QUOTE]
I tried it and actually c'? something that doesn't fit the soft digests the file that you have read ,
sorry, but if it is so? also has you , the file of the flash that you posted with cos? have you done it?
give me more data about the ecu
for me the file ori flash ? read it correctly !!!
Strange! Etc recognizes him. Cos? in mind I only remember the number, hw 0281 010 302
Sorry ecm titanium recognizes it correctly
But let's say that if you do with meucci, only the 24c04 already : ok.Scrivi only ori complete with a programmer eprom on 29f400+ EPROM 24c02 with meucci
not vuoldir nothing that the ecm recognizes him , because if, for example, the first address will bring them all to FFFF ecm recognizes the same
But if you change even a single bit, you change that ? accordingly, it is not recognized?
yes, but the bit about the area of the management ecu, if it touches the area immo for example, even in consideration of,
load this file with the ecm and see if it recognizes it
I've written x that I spoke of the 2-bit already posted at the beginning. the ones made in the 60's. anyway scp nn misses a hit on these ecu. I've always done just e2p and that's it . nothing lights.
sorry x the rittardo
scp cos'??
anyway, I found another file ori and ? identical to that bed
scp cos'??
anyway, I found another file ori and ? identical to that bed
m--cci
feel it come to this point, you should start from scratch, change the 29f400 and the e2p
how ? the flasks do not I have to write it again with the programmer you see that ? sputtanata!!!!
If the programmer makes you lesato id of the flash and nn is then writes and change . Or to erase and then write.
m--cci
feel it come to this point, you should start from scratch, change the 29f400 and the e2p
how ? the flasks do not I have to write it again with the programmer you see that ? sputtanata!!!!
also did this
then try to unsolder and write a file ori on am29f400.But why the decided to do the scodifica total?which errors did you have?
has not the keys! anyway, with the ori, the control unit makes me id do the ecu and diagnosis within
if gold gets you into the diagnostic errors?
here and a file ori bed with vagdash 5.29 +2 mod
When it decides to turn on, in memory, find an active fault ECU internal fault ECU coding error.
and some error related to sensors
Dimentivavo! on the back-illumination of the instrument panel, I always come out " immo active"
hello I scodifiche I do with so many of them and I have to say that the edc15p+ occasionally give problems to me personally, I've one in particular at the end I replaced the ecu
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.