problem reading megane 2 130hp 1.9 serial

[pnausmotorsport]

I tried pi? and pi? times to read a megane2 1.9 130hp
both gallo 1250 - mpps v5-magpro2 gallo - v50 -
and now with gallo v54 european but seem always at the lights and not communicating...
someone has already? made? a few tips?
thanks in advance pnaus

[leandro89]

but you talk of car petrol or diesel?

[chiptuning.cro]

Megane 2 1.9 130hp should be diesel DCI with EDC16C3.
I just yesterday I read a Scenic 2 1.9 with EDC16C3 in serial with MPPS v.12 even if the MPPS reads a file "weird" that is certainly the Winols can't find the checksum and even the titanium...

[pnausmotorsport]

S? the dci I said I
In the end it will take? the holy BDM

[legendaryslave]

Don't you riskiare directly bdm

[chiptuning.cro]

S? the dci I said I
In the end it will take? the holy BDM

leandro89 asked, because you are wrong section...

he, he, he, just the, I will try to write with MPPS, then' we see,' cause the MPPS says to calculate him the checksum on this.
If it crashes or if it loses codes inietori with MPPS let's see... I'll keep you informed...

[pnausmotorsport]

leandro89 asked, because you are wrong section...

he, he, he, just the, I will try to write with MPPS, then' we see,' cause the MPPS says to calculate him the checksum on this.
If it crashes or if it loses codes inietori with MPPS let's see... I'll keep you informed...

sorry, but why? you are able to read it? with what? the file ? complete?

[mafani]

leandro89 asked, because you are wrong section...

he, he, he, just the, I will try to write with MPPS, then' we see,' cause the MPPS says to calculate him the checksum on this.
If it crashes or if it loses codes inietori with MPPS let's see... I'll keep you informed...
do not write the blocks from personal experience I can tell you that I read with the cmd, and the file was good but the writing has locked,then I suggest bdm and you take off from the trouble,unless you already have the bk and you want to try,but then if it freezes you in writing and you corrupts the e2p so c...

[pnausmotorsport]

yes, but I don't understand how did he read with mpps....
it seems too strange!

[sportknight]

the problem is the framework,you need to insert the card and press and hold the button for 10 seconds to turn on the ignition
when you insert the card it seems that the picture is on, but really? not the

[chiptuning.cro]

yes, but I don't understand how did he read with mpps....
it seems too strange!

First see if it's really EDC16C3 because the more nine have EDC16C36 and the protocol it is equal, and not read with MPPS...

Second, the engine temperature must be below 50 degrees to read it in serial.

Then, Scenic II with engine code F9Q 803, F9Q F9Q 804 and 814 have EDC16C3 and with F9Q 870 and F9Q 872 have EDC16C36 but these are scenic III produced from 2009 forward...at least so says ESItronic...

[pnausmotorsport]

However, I talked to a megane 2 of 2007 and then I know very well how it works, the card
Any other ideas?

Maybe it could be the temperature below 50 degrees
But I've done a lot 1.5 dci ? you read and write to safely warm the engine

[chiptuning.cro]

However, I talked to a megane 2 of 2007 and then I know very well how it works, the card
Any other ideas?

uppss! sorry, you're right, I thought the scenic and not the megane, but still, they have the same engines with the same code F9Q, and the same units from my data...

[pnausmotorsport]

Pi? what else I realize now that I confused the section, you should make it move

[chiptuning.cro]

Maybe it could be the temperature below 50 degrees
But I've done a lot 1.5 dci ? you read and write to safely warm the engine

I, a Megane 2 1.9 dci are not able to read so that the engine does not erra soto 50 degrees...

However, I have no potutto to read, even in this way, a Renault Trafic II, however, 2.0 dci, because it mounts EDC16C36 and MPPS do not do this.
Ago, only data from the ecu and that's it...

[pnausmotorsport]

Ok but I also have galletto v54 and magpro 2 then I should do so if the problem ? the temperature

[leandro89]

discussion moved to the suitable section, be careful next time

[sportknight]

the edc16 renault reading and writing at temperatures below 70gradi..