kess v2 clone

[fabiovts88]

hello everyone I would like to buy the kess v2 clone to map easily my c2 vts with ecu bosch me 7.4.5 what do you think?
I do not deny that I would like to also map other car .. I look forward to your opinions

[audi sp]

great tool.. but you have only 50 tokens, c? a rumor around that someone has solved this problem of the token.. for the rest ? ok..

[fabiovts88]

I can't find the store of the forum I have already contacted the ***** you know tell me where to find the store!? you say that my car I can map it safely?

[audi sp]

I have seen in fact, the store is not c? more.. anyway, the answer is to have patience .. for your car, there are no problems.. also other tools can read it.. depends on where you take them

[fabiovts88]

for now I don't trust other type galletto experience blocked 3 times .. now ? been mapped my car to a mapper with official kit kess v2 ? clone up to now, I've heard good things , I would like to focus on what you know about that figures around?

and if, instead, I took the kess v1 clone? what are the main changes from the 2?

[Riccardo#28]

the kess v2 clone, they have taken away the token, and is supplied with a cd guide to change the old ones so that they, too, do not have ir? the limit of the scriptures.
I have just bought, but I'm having problems (the problem of alarm clock - wake up error) so I can not read, no machine. the support from where I bought it said that I will send? a missing file: we will see.

[sno74]

this problem of expired tokens anhce I have heard but some resolve by changing the micro-and give you the kit getting their gialini seen that you've purchased the cd to change to the token you could open a section and post the content, and certainly you then we can help you better zip the file and put a pass to not let all and then download the content.......

[Riccardo#28]

this problem of expired tokens anhce I have heard but some resolve by changing the micro-and give you the kit getting their gialini seen that you've purchased the cd to change to the token you could open a section and post the content, and certainly you then we can help you better zip the file and put a pass to not let all and then download the content.......

the problem I have I don't think it derives from the token since I have never used it ;)
support me is by sending a folder with files to copy to the sd of the kess cos?, in theory, to solve my problem.
once the avr? verified the operation of all share? the information and files that you need, including the little guide to "rehabilitate" the kess with the token expired

[fabiovts88]

I wanted to know where you bought it? how much have you spent? that difference is with the kess v1 clone?

[Riccardo#28]

I wanted to know where you bought it? how much have you spent? that difference is with the kess v1 clone?

the kess v1 I do not know.
I can not link to your site for regulation, but I comrpato in Italy

[fabiovts88]

have you spent much?

[Riccardo#28]

I can advise you to contact the admin of the forum, they sell the equipment referred to above.

[fabiovts88]

ok, thank you for the info I already contacted l admin I look forward to responses :)

[marco]

hello kess v1 turns with program magpro with regard to the kess v2 clone and is equal to the ori, but there are problems with the scriptures, even if you change the micro is not good if reset with jtag many do not azerano I have tried 3 kess v2 only one I solved

[fabiovts88]

but the kess v1 ? as reliable as the v2 clone?

[marco]

now I think that it went inpensione!

[sno74]

but I would say its no kess v1 ? a good tool clearly limited to list of car port........

[fabiovts88]

you say ke v1 clone I can safely make my ecu via obd?

[sno74]

which ecu you have to do........

[fabiovts88]

bosch me 7.4.5 of a c2 vts

[marco]

tisei answered by only limited
but I would say its no kess v1 ? a good tool clearly limited to list of car port........

[fabiovts88]

but can anyone tell me if I can make my unit traanquillamente?

[fabiovts88]

msport can I ask you if with the kess v1 clone I can do my ecu bosch me 7.4.5 a c2 vts in all tranquility? via obd?

[Emanuele54]

Hello someone ? aknowledge of new updates after the 1.89???? reliable operation????
Thanks

[rodcraft86]

runs an update 1.93 but it seems to be a hoax, with this clone goes to luck, some work fairly well, while others are poor, now they also give the jlink to reset the token, but it seems that it does not always work

[corrado]

I took a short version 2.06 with jlink , still I have to try and I hope it goes well

[sno74]

but then you have in the cd-rom in the bk of the micro what you have given with the toll and jlink that soio for now, we are still 1.03 the 2.06 without agg imaging nn everything works.........

[corrado]

but then you have in the cd-rom in the bk of the micro what you have given with the toll and jlink that soio for now, we are still 1.03 the 2.06 without agg imaging nn everything works.........

no Cd do not think there is the Backup of the micro ... I repeat, and very little that I have received and I have not had time and opportunity to give it a try ...

[sno74]

but then, how do you do when the tokens are finished you have to have a bk otherwise finished the token you do not use it more.... Post here everything that you have on the cd that we see.........

[corrado]

but then, how do you do when the tokens are finished you have to have a bk otherwise finished the token you do not use it more.... Post here everything that you have on the cd that we see.........
but not ? the bk I have to do it before I use it ?

now as I finish eating I am attaching the content ;-)

[giua]

The guys I with clone I can not have read parechie units as ford cmax mito alfa romeo etc? it also happens to you and only my kessv2

[betrescudan]

this also happens to me

[sno74]

Depends on the quality? the toll all of the protocols listed in the sw work regularly I up to now I never had problems...

[fabiovts88]

It may be that those units you can read them only in boot mode or bdm

[riccardo59]

Or it could be a windows problem.-

[fabiovts88]

Depends, but if it was a windows problem nn should be right ... I know that up to win 7 works well

[rodcraft86]

I for now I have had no problems except for the edc15

[sno74]

With edc15 not need kess v2 with a simple mpps do safely clear if edc17 to be made in the boot as from the attached drawings..........

[rodcraft86]

well said sno, I think exactly like you, in tricore works from god

[cicciogsr]

I got one a few days ago I tried to read a dacia duster with sid 305 and ? went well then I was an old edc15c5 has read and written safely, has anyone tried to read and write a me7.9.10 type tjet?

[riccardo59]

but you took the kess v1 or the kess v2

[cicciogsr]

I speak of the Kess2.06

[gianni1001]

A question that should be of concern to always kess 2.06
You can? use Ecm tit official with the files being read by kess v2 2.06 clone?
Have you encountered problems?

[fabiovts88]

I don't know I I emc tit nn official so I don't know no, but I think that changes xke l officer has only the most driver

[oakley1]

Certain that you can? use

[ugoboss]

what kind of problems you have had.

[oakley1]

I got one a few days ago I tried to read a dacia duster with sid 305 and ? went well then I was an old edc15c5 has read and written safely, has anyone tried to read and write a me7.9.10 type tjet?

Ciccio the me7.9.1 you can only write... I don't know if you will wread ...

[ugoboss]

Ciccio the me7.9.1 you can only write... I don't know if you will wread ...

the clones do not have the database.

[rodcraft86]

just find the database of the official and copy it in the res/ori and everything works

[gianni1001]

With clone kess v2 can't read Delhi DCM1.2
A KANGOO 2011 1.5 dci 86cv 259-560
With the cock v54 you.....

[gianni1001]

just find the database of the official and copy it in the res/ori and everything works
And where do I find the folder? ������

[gianni1001]

Does not work
Even if you insert the drivers in the folder does not see them when the program starts up, and is looking for the driver name

[gianni1001]

Sorry mistake
But you speak to insert the file ori?
Not the driver?

[rodcraft86]

instead, it works perfectly, I tried personally on marelli m6, read in the virtual read

[gianni1001]

what kind of problems you have had.
Error code
interruption in the data stream

[gianni1001]

Ok
Unfortunately I don't have the full and official....

[ugoboss]

just find the database of the official and copy it in the res/ori and everything works

I know that the files are dedicated to the interface, and therefore not interchangeable with the other in order to download them you have to have attached to the pc, online, on the contrary of the manuals that do not want the interface is attached, in any case, we should try to be sure.

[ugoboss]

instead, it works perfectly, I tried personally on marelli m6, read in the virtual read

rodcraft86 if you've tried then ok, but if you can post the folder you we would all be grateful.

[sno74]

The cock perhaps ? more aggiornato............ I don't think it's a problem of kess.....

[oakley1]

You have to try... Even why? I think that the files of the folder ori are normal to the original files.. That the interface goes to look for according to the number of hw-sw. If the fellow disagrees with the folder, we can try

[ugoboss]

You have to try... Even why? I think that the files of the folder ori are normal to the original files.. That the interface goes to look for according to the number of hw-sw. If the fellow disagrees with the folder, we can try

perhaps it would be enough to know how to catalog them in the folder, so that the sw to find them, and then you could add them yourself, rodcraft86 do see an example.

[rodcraft86]

guys I have done so?, I was able to find both the manuals and the folder ori and I replaced with the ones present in c:/ksuite, done this, he began to read in the virtual and to show the manuals when I select an ecu

[oakley1]

You may share if the directors and, if thou agree? It would be a big help

[cicciogsr]

? can share this material?

[sno74]

It would be a very good thing to share......

[rodcraft86]

I don't think is possible, and then I believe that administrators use alien could then post them to them if they want to

[oakley1]

Sin..... Try asking to the admin if you can.. unless you don't want to share them ? another speech......

[rodcraft86]

considering what I spent for them, I don't think is the maximum share them with everyone, however, I leave the word to the directors

[oakley1]

Each ? ****** rightly share them or not.. Personally I've posted the solution to remove the tprot from edc17c46 vag that I have not had the free but I was well happy to share them ( end off topic) sooner or later we will find is folder ������

[rodcraft86]

if the admin give me the ok to share them but ? lots of stuff, the manuals are 1.12 giga, and the file ori about 400 mega if I remember correctly

[oakley1]

Thanks to the community? you sar? grateful. You need to contact the administration if you ask here you will not answer

[rodcraft86]

ok your provider and see if you can leave it to me to do

[ugoboss]

if the admin give me the ok to share them but ? lots of stuff, the manuals are 1.12 giga, and the file ori about 400 mega if I remember correctly

maybe ? to the contrary, I have downloaded the help file updated on Saturday, and are 420 mb, if you decide to post the file of the ecu many thanks.

[rodcraft86]

I in the help folder I have 1.12 gigs of manuals but before it was empty, maybe now provide already? with some of the manuals even on the clone

[sno74]

Each ? ****** rightly share them or not.. Personally I've posted the solution to remove the tprot from edc17c46 vag that I have not had the free but I was well happy to share them ( end off topic) sooner or later we will find is folder ��
We hope for more? before that poi..............

[ugoboss]

I in the help folder I have 1.12 gigs of manuals but before it was empty, maybe now provide already? with some of the manuals even on the clone

I don't know what to tell you I have them downloaded from the website sales dept. Saturday, of course I only downloaded the ones in Italian, doesn't it ? that thou hast also those with other languages.

[rodcraft86]

exact I have all the languages, that's why

[ugoboss]

ok, so now we are with the counts.

[oakley1]

We had the authorization to share?

[rodcraft86]

I sent a **** to the staf, they are waiting for a response

[rodcraft86]

here I am guys, I received the response from the administrators, I'm attaching here

hello,according to the regulations it is forbidden to post similar material
then I do not absolutely such action,good
day.

the regulation prohibits these shares, and I think it is right to avoid the consequences

[oakley1]

Sin..... It would have been a useful sharing

[rodcraft86]

? true? I think they are right, post material that is protected ? against the rules, I had not read well on this aspect, and I apologize also for the staff

[ugoboss]

? true? I think they are right, post material that is protected ? against the rules, I had not read well on this aspect, and I apologize also for the staff

ok, but if one of them wanted to buy these file are you willing to sell them.

[oakley1]

Exact also I am willing.. you Could put an ad on the sales the **** to contact us for the sale you can? put

[rodcraft86]

are you sure that you can? I would not like to break the rules

[ugoboss]

rightly so here they do not want the file, you make an announcement of the sale file without specifying names, then the transaction continues outside of the forum as usually happens, for all the sales, I don't see anything that extends beyond the regulation.

[rodcraft86]

ok then, I proceed to the regulations

[oakley1]

The file ori have them in the res folder right?

[oakley1]

Roadcraft explain to me one thing.... You got the folder of the file ori and l have copied in the kess????

[gianni1001]

Sorry where do I find the ad?

[rodcraft86]

guys nothing to do, I don't want to risk being banned, the admin have been very clear and they told me that the material covered by the license is not ? true, I was hoping to come in person to clarify everything, but evidently not thought it necessary, I'm sorry

[Streetracer90]

Guys question... it Works on Windows 8.1??

[ake85]

Hello can I know if better the kess or the rooster? who says that the kess ? much more competitive...I saw that you have tried to read various files and then you'll know tell me

[cawadany]

They are two different things. The Kess only works in the obd, the cock is also bdm and boot.

[ake85]

They are two different things. The Kess only works in the obd, the cock is also bdm and boot.

so if the law only via serial covers a large car park? can I know where you can buy? I have the lag v54, but I would also like the kess...here on the forum, do they sell it?

[fabiovts88]

With the kess v2 do in boot mode and from personal experience I find it best the kess v2

[ake85]

they say also, I find it good but you need to find it at a good price and, above all, that give good guarantees...I have seen many, but a price that is not accessible!!!

[Streetracer90]

Guys but to get the manuals on the guides for reading tricore etc.. How do you download them?

[rodcraft86]

https://www.professionalchiptuning.net/nuovo-sw-suite-2-05-a-vt6553-6.html?highlight=manuali+kess

[Streetracer90]

Thanks rod :D

[oakley1]

Any news? on the fw 4.034????

[rodcraft86]

:cool: please

[Emanuele54]

Hello all,
? true that on the clone ? available version 2.06? someone has tried/tested?

Thanks

[max40]

hi I have seen this new version 2.06 with no block or counter .. chinese sites of course, but looks good and still I've seen sites that sell the same thing at twice the cost of chinese.. then I know, however, that the based ? always the same..I believe that both the last update and without a meter .. bisognerebeb try it !!

[ake85]

version 2.06 ? a bomb nothing to do with the cock, another product and as it says in max chinese or not chinese, is a wonder...I have also ktag

[oakley1]

I confirm!? spectacular....I wrote with kess v1 a astra opc and I ? stuck at 100%..with the cock I have not solved anything..the last resort was the shelters with kess v2.... Match the writing finished and the machine is in motion

[ake85]

? a other quality? I have become crazy to read a marelli NEVERTHELESS, with gallo v54 at the end of the read k-line if I had kess and ktag hadn't done it already? a very long time...then again everyone has different experiences

[gianni1001]

I have the 2.06 which is said to not have the counter
For? I have almost reached 50 scriptures, and he asks me to do the update immediately online why? missing 8 scriptures
Possible???

[ake85]

[sno74]

No token exists, but it works through a procedure that you have given to the purchase....

[Streetracer90]

According to me you have to repeat the procedure that you had done at the beginning gianni!! The one in the video so to speak ;)

[gianni1001]

Ok to place
Made with j_link
In practice, it rewrites the firmware as the first time

[cawadany]

Someone who has the 2.06 with almond eyes, who then ? a 1.89, can you tell me if in the list of drive c'? the Porsche 911 997 turbo 3.8 500 hp year 2010?

[gianni1001]

in the list there is a 3800 turbo MA1.70 500 HP BOSCH ME7.8.2 FAM 201

[cawadany]

And you are. Can you check if ? active protocol? You have the 2.06 chinese?

[gianni1001]

the protocol is active and' in grey
I have the 2.06 /1.96

[gianni1001]

sorry I have not answered all of the
? chinese

[gianni1001]

among other things I noticed but after the update with the j-link I and' pop-up under EXTRAS in the written K-TAG
I hadn't noticed before.....

[cawadany]

the protocol is active and' in grey
I have the 2.06 /1.96

Sorry, but the 2.06 chinese ? really? a 1.89?

[gianni1001]

I was on the main screen, when I launch the program, I see in the bottom left of that version ? 1.96
Then, being a clone I do not know if ? really that or if you see it from another side....

[sno74]

Make info on the main screen and then see what fireware have put the mail screen......

[gianni1001]

I can't upload the screen anyway info on the FW and' 3.099

[gianni1001]

Here he is ? right?

[cawadany]

Ok, ? a 1.89.

[sno74]

This corresponds to 1.89 as I thought............

[rodcraft86]

today I have reset the token of my using jlink, 5 minutes and ? returned as a new

[ake85]

Hello can I know the exact procedure? the cio? once connected to the j-link to the computer and the flat cable to the kess tells me the connection with success...then you posted another image where I said TAKE DOWN the TF CARD OF KESS V2, what would it be?