stove fiat panda with the electronic system

[gero]

hi guys you are starting to break the blades of the mixer hot and cold air which is connected to the electric motor actuator of the hot or cold air to someone of the different solutions of my own to repair it without going to the dashboard

[beppe.c]

hello!if you are sure that ? the paddle of the mixer, the last I see,misa' you have to get off everything.

[carlo abarth]

but you hear rattle the motor..or not you mixing??'

[gero]

I removed the starter motor and it works,I have seen that from the palette comes a mozetto plastic and broken I don't see any solution someone has solved in some way?

[Backgroop]

I removed the starter motor and it works,I have seen that from the palette comes a mozetto plastic and broken I don't see any solution someone has solved in some way?

You have broken the gears of the heater precisely of the motors, mixers, and I have changed several, some under warranty, and some are not, Disassemble the dashboard ( this operation is not complicated on the panda) order the kit gear fiat and replace, I would recommend that you replace them all then you have to remove the heater to do this good work..

[progress]

no lasting solution in the time want to remove the dashboard and sostituit?king

[gero]

you and route the headstock

[gero]

guys I found the solution, I hope that it works in the time I managed to drill holes in the plastic part of the headstock, thus warming it up with a profile of steel which are located on the brush wiper crystal, then, in his turn, made on the small piece broken that is located on the gear, and it is working great for a week, all of this without removing the dash, about 20 minutes.

[beppe.c]

brilliant!!!we hope to last.

[gero]

I hope I made two and they are working well