Sign in

View The Full Version : accelerator pedal



gfr
12-02-2014, 13:22
Hello guys , I have a question for you , I have a customer with 500 2013 with a new ecu ,never would like to put a little on the accelerator pedal , I don't know what to tell him because they are contrary to these aggeggini, I would like some tips from you on what to do ,thank you

passion engines
12-02-2014, 13:36
I am for the remap I do not accept these add-on modules including the one You mentioned, from the map you decide to intervene according to your requests and if you leave the dpf....

voglioimparare
12-02-2014, 13:52
I am for the remap I do not accept these add-on modules including the one You mentioned, from the map you decide to intervene according to your requests and if you leave the dpf....


I fully agree, with a cost of a module, the accelerator,is a able of the map where possible "play" even with the gas pedal...

ugoboss
12-02-2014, 13:52
I am for the remap I do not accept these add-on modules including the one You mentioned, from the map you decide to intervene according to your requests and if you leave the dpf....

they are of the same opinion, no additional modules, a good rescheduled and you'll see that it's much better.
p.s. what do you mean a new ecu.

passion engines
12-02-2014, 14:51
likely to be a 8df

sergiot
12-02-2014, 15:45
the accelerator pedal ? too important to the safety of the vehicle, the council not to use these "things"

gfr
13-02-2014, 07:48
No, perhaps I didn't explain , the car, and gasoline and it does not fit ne 8 ne 5 but an ECU never seen

gfr
13-02-2014, 12:43
7104 que7104sta and the ecu

frantik3
13-02-2014, 18:37
mounting of the connectors bosch something safe again!!!!!

frantik3
13-02-2014, 18:52
and a magneti marelli I ever had an ecu of these yet, but will be different, marelli at least cos? seems to but I don't know what can be with that protocol to read it!!!!!

frantik3
13-02-2014, 18:57
found mount a UNIT IAW 9GF

with what you might read??????

gfr
13-02-2014, 19:52
In between, I can confirm that the ecu is that ? even I know how to read it ,for what I had asked for the form, which I hate ,help!!!! I hope that some good samaritan to enlighten me on the road to map it ������

alfonsoh
22-02-2014, 21:14
if there are no solutions I can recommend a couple of brands in the pm, I've seen a couple in action on a panda petrol and a g.point control unit 5sf8-9 although riprogrammandola in addition to the advance, there is only the map with the pedal.
the installation and programming ? simple and good salt of the rpm in the acceleration, not the d? no horse in pi?, but from the feel of a nice shot, works well in 1st and second going to fade in the 3rd and then getting lost in 4a and 5a.
it all depends on what is expected by the customer.

leandro89
23-02-2014, 18:02
if there are no solutions I can recommend a couple of brands in the pm, I've seen a couple in action on a panda petrol and a g.point control unit 5sf8-9 although riprogrammandola in addition to the advance, there is only the map with the pedal.
the installation and programming ? simple and good salt of the rpm in the acceleration, not the d? no horse in pi?, but from the feel of a nice shot, works well in 1st and second going to fade in the 3rd and then getting lost in 4a and 5a.
it all depends on what is expected by the customer.

read the rules, if you need to write ? legal and is not protected by copyright then you can write, and vice versa get the info for you.
also write that you can say it in pm ? prohibited by the regulation. be careful

alfonsoh
23-02-2014, 18:22
I read the rules it seems like it's forbidden to say the names of the brands of add-on modules, be the ones that I tried was the one on the panda, and on the mercedes and g point to the pedals the accelerator. one and set the software via usb and the other comes already set, but you can buy the tester to make the changes if you do a lot of it.