skoda 2.0 tdi edc16u34 egr off is not good!!

[alfetta80]

hello and welcome to the flavors!!
boys or excluding the egr on skoda 2.0 tdi edc16u34 but it's not okay it works the same I don't understand!!I enclose ori and mod can someone tell me where am I wrong??thanks!!!https://www.professionalchiptuning.net/attachment.the php?attachmentid=7081&d=1392142045

[chiptuning.cro]

go to address 1890BA and see a little bit... ;)

[sno74]

The map should always be made to flow all over me on a edc 16u31 I found the 3 different points.............

[ugoboss]

I'll give you a tip on these units, if you use ecm you'll see that it calls the map of the egr injection phase, you always have a look at how many there are in the list in the driver, if you have 2 as in this case, surely you will have 2 points with the bit to be reset to the egr-off, then, of course, is that you have to scroll across the map to safety.

[legendaryslave]

I'll give you a tip on these units, if you use ecm you'll see that it calls the map of the egr injection phase, you always have a look at how many there are in the list in the driver, if you have 2 as in this case, surely you will have 2 points with the bit to be reset to the egr-off, then, of course, is that you have to scroll across the map to safety.

quoto in full there? who says the friend ugoboss

[alfetta80]

thanks guys for the answers... actually there are two of them one to address 1890ba as suggested by chiptuning and one to address 1890c4 that or mod I,then in practice so you're telling me that I either need to mod the two of them right? or do you understand??

[chiptuning.cro]

yeah, that's right...

[neo]

Hi,I do diversamente.Posto the 2 files (file ori and your,and then use it directly mod file.)and also the photos.

[ugoboss]

Hi,I do diversamente.Posto the 2 files (file ori and your,and then use it directly mod file.)and also the photos.

your closing goes well neo, but you also have closed only a part, and for accuracy other than alfetta80.

[alfetta80]

ok all clear!!!!!!!!then I prepare the file and as soon as possible write it and I want to know how it went!!!thanks to all!!!!!!!!!!!!!!!!!

boys little doubt it is normal for the first panettone and different on the other???the rest are the same!!

[ugoboss]

it is normal, if you want to e-mail the file to the control.

[alfetta80]

here is the file egr off

[ugoboss]

ok write.

[alfetta80]

ok write.
ok ugoboss thanks!not or the machine at hand as soon as the customer, me, the door will update!!!!!!!!!!!

I was looking at a map of a worse'206 1600 hdi edc16c34 that or except the egr some time ago,on the drever, or noticed that there sono4 injection phase,after the first two ec exclusion egr, going forward, after the other two there's another, you must exclude this one?I, or excluding only the first, but in this case, from the diagnosis, the egr was by-passed and all is now okay..***** and why??there is an explanation?

[alfetta80]

guys the file written to the egr now is not working!!!thanks to all for the help and the availability!!!!!!!!

[sno74]

We are pleased that ahi solved..... important that you always see areas of the map..........