How to make a bosch edc15c7 ?

[159sportwagon]

I have a bosch edc15c7 of a fiat stilo 1.9
Jtd 8v . It is in the bdm?

I would like to do it with the wing nut v54 clone european .

[blackwolf76]

The edc15 you do not in bdm, only in the serial or to the limit in the boot.

If you need to do a tour you have to detach the eeprom, since the code blocks reading and writing.

Anyway in the serial works and is quiet, not nails easily.

[ugoboss]

the flaw in the serial eobd socket , and' fast both reading and writing.

[159sportwagon]

Ok thanks for the info.

[cicciogsr]

you can click on any tool gallo 1260, mpps, gallo again.. the 115 hp digests beautiful bucket of diesel

[Driver]

[gezame]

Hello
You to cualque bloque, you have to desoldar the flash 29f400 and restore with eprom programmer

[fuorigiri12000]

I confirm that I made a lot of them.

[pnausmotorsport]

if you have magpro, go on the safe side
pay attention that in writing, there are the fans, it then checks the status of the battery!
pnausmotorsport

[sportknight]

no part no fan

[pnausmotorsport]

Fiat stilo 115hp part of the fan 100% secure

[Driver]

On the Duchy 2000 87Cv EDC15C7 not part of anything :rolleyes:

[pnausmotorsport]

Well, the post was for the stylus...

[gezame]

Fiat stilo 115hp part of the fan 100% secure

Hello
Yes, of course, in reading and in the scriptures.

[147q2]

you do it with every type of equipment and not part of any fan, mapped to duty flywheel

[Friar]

You do almost everything in the obd

[nox]

Also I have made enough of stylus 115 and I assure you on me ? game the fan in reading , even my father was under the CAR to pull out the hose intercooler moments of the detachment of the fingers!!!!!! I repeat me ? only happened on one of the many that I have made with v48 for? don't ask me why

[SandroMarciano]

Also I have made enough of stylus 115 and I assure you on me ? game the fan in reading , even my father was under the CAR to pull out the hose intercooler moments of the detachment of the fingers!!!!!! I repeat me ? only happened on one of the many that I have made with v48 for? don't ask me why

to me, it is this fact of the fans... ever...
For the rest of it ? an ecu that is from the obd with virtually any instrument, by the mpps to the rooster v2 to v1, the less reliable is the magpro, with whom ? recommended that you write at speed? low. On my car, I've done about 250 scriptures, and I never had to unsolder...

[robby51039]

I read with kess v2 and read me are the games the fans definitely depends on the type of plant and type of hw and sw of the control unit

[sumi1]

I cello a edc15c7 to try a tour of the interface ,or removed eprom and I can read and write with any programmer mpps-magpro-cock.Or removed alaid power supply in writing 60%to see if it is blocked, but the rewrites ugualle.