Adapters x elm 327

[Matty23p]

Guys I would like to know if someone of you to the 3 adatatori ke some sell in a kit with the elm??Thanks to all

[granderobocop]

good evening I have built an adapter using the extension cable obd a container for the electronics is very small and three dividers, one-to-four one-way to three-way and a one-way, and so I have all in one.

[Matty23p]

ok understood practically you have enclosed the 3 cables in one...but it will work?? and x the pin out, you used to multiecoscan??thanks

[motorsport]

Multiecuscan is called..... guys the cables for a few euros all three of them are,you are sure that they work!!

[Matty23p]

it is, in fact, I have the eml 327 and the three cables of all, I paid 45 euro only ke were not placed in the short pins 4 and 5 on your put them in short??

[motorsport]

I no,it works for me without problems!!!

[Matty23p]

even then I your are short...but you ke diagnosis do the engine and then??

[motorsport]

even then I your are short...but you ke diagnosis do the engine and then??

Gi? you or answered by the other party, you have opened two threads, you're making me turn my head,everything I do abs engine airbag city electric .....:)

[granderobocop]

guys my cable three-in-one works fine, I have the elm 327 vers. 1.4, but rightly you can also buy the three cables for a few euros, and they work the same as well.

[Matty23p]

ok thank you all guys ;) :) I'm sorry, motorsport...

[ducati83]

it would be cmq convenient to make the change to a kkl with a switch...not to have so many adapters around....with a cable, you should do everything....

[loris_46]

That's what I'm trying to do it myself since I have a kkl that I advances,but I can't find the pattern...

[ducati83]

I am looking to see if I find something....the place

I found:
then the pin that interests you move ? the 7 to pin 1 drivers and 9, which should be the power steering....at least from what I understood for the group jtdm.
now you can jump...I tried it and it goes... or I thought I would take the cable from pin 7 to get it in a switch and bring it up to 7 for engine diagnosis etc to 1 for airbag, and 9 for power steering and I know abs.....not ? difficult...
anyway, on my bridge....1-7-9 it all works....