Mpps 13 or 5, magpro2, galletto v53 what will change in practice?

[giannimini]

Hi guys, I'm documenting to start making units with some friends of mine mechanical about which is the interface with the price the better the performance to begin.

Let me explain what we want to do and then eventually I recommended.

I have to say that I have spoken with our moderator and you have to say ? very very clean and clear but I wanted to listen to your opinions even if we should riaggiorbarci the phone.

Conunque in practice, I was convinced to take a galletto v53 but I regretted it as to read a delphi a micra has made me a file from 40k that you can? change only in 2D and tirtanium manco open it.

Now I heard that the mpps is 256k and titanium opens it... But which version ? 13-the 5?

Then exit out of the kess clone that is, the Mag. Pro, par. From what I understand would be able to do right files for titanium, and you would have to interface tsi better from what I understand.

Ok said there? I wanted to know if I'm the msg pro law even in the boot for example the med 17 bosh or. Mev 17...
Or that is in any better as reliability? of a cock in serial.

In short I wanted to hear your opinions about it.

So better averlibtutti and three to work with titanium? Or just a mpps?
At the end we want to take advantage of titanium why? we would not be able to mod a file in 2D or engage in readings in boot mode.

That c'? we are the wing nut if it is not a file that can open from titanium then? ? we must read them with a simple mpps?

Thank you for your attention and advice

Gianni!

? sorry, but I write with the cell and re-reading ? a little a casino haha anyway I hope I did understand pi? or not :-)

[carlo abarth]

depends on the budget you have!!!

[chiptuning.cro]

take a "gallo v. 2," the famous FGtech v. 48 because you just have that' works well' with a CAN that' K-line, BDM you said that' you don't need, and if you also want a MPPS v. 12), which is about 15-20$ now, to have something to spare ;)

[legendaryslave]

I would advise you not fossillizzarti on the titanium much and seguirei the board of chiptuning.cro a v48 ? a show

[giannimini]

Ok, for now, among my friends a mpps v5 and a cock v50 c'? we have it.
The 48 ? best of the 50?
The mpps instead of 35 euro, which is located on auction sites, what differs from what 80 euro?

I know that they are stupid questions, I also wanted to opt for the cock and the mpps

135, 150 the cock and 35 of mpps and gi? I'm supposed to work the middle of the quiet on the ecu half-secure serial
Evil c'? go I thought I would inform you here first to read and write certain ecu nasty.

Instead, this magpro, with works? Only in serial mode possibly?

The budget? We do 200 euro? Something discreet also clone reliable exist?

[cinqueturbo]

Ok, for now, among my friends a mpps v5 and a cock v50 c'? we have it.
The 48 ? best of the 50?
The mpps instead of 35 euro, which is located on auction sites, what differs from what 80 euro?

I know that they are stupid questions, I also wanted to opt for the cock and the mpps

135, 150 the cock and 35 of mpps and gi? I'm supposed to work the middle of the quiet on the ecu half-secure serial
Evil c'? go I thought I would inform you here first to read and write certain ecu nasty.

Instead, this magpro, with works? Only in serial mode possibly?

The budget? We do 200 euro? Something discreet also clone reliable exist?

giannimini quadra that every ECU engine pu? become scabby,
s? goes into the lock, and the fault of the HW, the poor or the pc go into standby,
or the car has the battery gone, etc, etc,
then do not think of myself as approachable, HW good with$200..

[giannimini]

The mag pro kess clone that say its new, costs about 200 euro from what I understand
? mpps with 80 euro a good one it is .
200 euro are a few 250?

Consider that already? we have a kess slave cost 2000 euros :-)

Then we would like to make a small investment to start working with us ? always keep the slave.

I know that you do not ? never in a night of iron but, in the end. Something to start us sar? no?

[leandro89]

discussion moved to section ir? fit, be careful next time

[giannimini]

the guys in practice, my mechanical friend to start on a budget, I can't do anything about these on the websites online that sell mpps v13 or 12, they are reliable or ? a lottery?

someone has tried?

why? there are different types, type black with transparent and cans.

the ones that you have and I think they are as reliable as they are? transparent black, with a box or a can? the pink and green with flowers :-)

sorry for the joke hahaha

[chiptuning.cro]

I have, among others, aggegi,' a MPPS V12. black all cable, at a bosnian some years ago on ebay, the production of I know not where, that' he never falito, but' not' and' like this' now sell whole ...

[leandro89]

the guys in practice, my mechanical friend to start on a budget, I can't do anything about these on the websites online that sell mpps v13 or 12, they are reliable or ? a lottery?

someone has tried?

why? there are different types, type black with transparent and cans.

the ones that you have and I think they are as reliable as they are? transparent black, with a box or a can? the pink and green with flowers :-)

sorry for the joke hahaha

have you asked the same question in another discussion, avoids filling up the forum with the same question, be careful of anyone you meet?, writing two times does not speed up anything

[giannimini]

I figured it out.
But, in practice, a mpps good from a bad one, you can distinguish already? from the reading, or, you have to first fail in writing for realizing it.

In the sense if I read 15 units for example and to me reads them all, why? in reading should be fine, and then fail in the writing?

[passion engines]

hello, I saw that the times of the file to 512Kb and 1 Mb are passed from the time ? tool should + reliable, the version with the aluminum box of grey I know ? the + reliable of the series mpps. If you just spend a little hang...... Ask for info to the staff you recommend? on reliable products

[gfr]

hello, I saw that the times of the file to 512Kb and 1 Mb are passed from the time ? tool should + reliable, the version with the aluminum box of grey I know ? the + reliable of the series mpps. If you just spend a little hang...... Ask for info to the staff you recommend? on reliable products

and true , I got up and over to make a few cars is not up to date to modern cars , follow the advice that live better, I want you to remember that the ecu will cost you a lot ......