Lancia Delta HF Integrale 2.0 16v - Checksum

[chiptuning.cro]

But on these old eprom 27c128DIL from 16kb, after mapping we need to do the checksum or not ?

I ask because I have to make the map of this ORI (https://www.professionalchiptuning.net/showthread.php?198-Delta&highlight=integrale#14) but I don't have the checksum calculator for these.

If you need to do the checksum, there is qualchuno that' knows' or can it be done?

Thanks in advance!

[alfajtd]

si c'? to do the check.... if you don't, it seems to me that it starts the same machine...
perhaps you have left a light on...

anyway, a programming sw ECM type, etc.. they do it automatically

[chiptuning.cro]

Thanks for the response, however, the ECM does not' automatically because it does not have is' the family of checksum, and don't even MAP 3D and certainly' the old checksum calculator.
Thanks the same!

[Backgroop]

The cecksum you directly calculates the software with which you write the eeprom, or there is a similar function on the inside, with what the read and write??

[alfajtd]

edit the file...
write it down...
and test...
you will see that there will be? no problem...

[chiptuning.cro]

edit the file...
write it down...
and test...
you will see that there will be? no problem...

Ok, thanks a lot, I'll try so then I'll keep you informed as and andatta... Thanks!

[frantik3]

you don't need to cecksum

[leandro89]

discussion moved to section ir? fit, do more? attention the next time

[chiptuning.cro]

discussion moved to section ir? fit, do more? attention the next time

You excuse, I was wrong to post it, but I also subbito alone reported that' I did it...

Back wing question, I can conffermare what they said alfajtd and frantik3 (thank you!), because today I uploaded the file without calculating the checksum and the machine, and the game, with no problems.

Thread closed for me, thanks also to the others that I have above cittato and have intervened.

[faberecu]

do you hand ,if you want, but on these the problem ? the chsum , 280 horsepower possible all golds but to tour with stecchio . better if you use 100-octane fuel
if you want info on delta , I have all what you want, I was running up until a few years ago

[Emanuele54]

Why? not put something on the forum faberecu?

potrtebbero serve all.....

Thanks

[faberecu]

not ? correct to post the modified files, the forum has its own service , I don't think siaa even allowed , but then you say that I don't have a lot of pleasure to share files rolled

[Emanuele54]

Hello, you wrote to another user:

"if you want info on delta , I have all what you want, I was running up until a few years ago "

and being one of the millions of fans of delta, I was curious to know what was in your possession...... all l?, ****** do not post anything but if I wanted to give some advice for turbo diesel engines or illustarci something on the legendary delta would you be happy with a lot of people here on the forum.

Thanks

[faberecu]

you info is

addresses and method no problem

[leandro89]

the discussion calls for a correction of the check, if you want to open a discussion to learn something without putting jelly ready know all the ways? how to make

[matech]

Working on it very often on these cars I would venture to say one thing:

? true, they are simple ecu that contain 4-5 maps "fundamental" in everything, but ? unthinkable get to invent a right map of healthy plant artendo from the file of the series.

There are files available at the time, developed by Abarth with the engine on the test bench and all of the appropriate probes installed, which also have the break to be changed on the maps injection and advance to have the points of the fuel mixture every 500rpm.

Not ? the issue of not being able to work or find the jelly is ready, but rather who ? willing to invest a month of development on an engine when it already exists? something great?

I've seen pseudo-maps 280cv developed at the desk who were the original map changed... then with a point of the fuel mixture to 4000 rpm and 5000 you would make a good electronics?

[Four]

Working on it very often on these cars I would venture to say one thing:

? true, they are simple ecu that contain 4-5 maps "fundamental" in everything, but ? unthinkable get to invent a right map of healthy plant artendo from the file of the series.

There are files available at the time, developed by Abarth with the engine on the test bench and all of the appropriate probes installed, which also have the break to be changed on the maps injection and advance to have the points of the fuel mixture every 500rpm.

Not ? the issue of not being able to work or find the jelly is ready, but rather who ? willing to invest a month of development on an engine when it already exists? something great?

I've seen pseudo-maps 280cv developed at the desk who were the original map changed... then with a point of the fuel mixture to 4000 rpm and 5000 you would make a good electronics?

I would have a problem on a delta hf 8 v...can I ask you?

[matech]

I had not seen the message!

write well, we are all here....