Ecu data passat 2.0 tdi 170 cv can someone help me?

[eobdexpression]

Hi all I have the following files of a passat 2.0 tdi 170 bhp year 2009 and ecm titanium, I did not open automatically but going to check the driver manually, given that you must assemble a edc 17 there are a myriad someone could possibly check if the file ? modified and the ecu data? Thanks.

[klajdin]

with what tool ? been read ?
I can't find anything, seems to be an encrypted file, or ? bad bed..

[eobdexpression]

with what tool ? been read ?
I can't find anything, seems to be an encrypted file, or ? bad bed..

Hello the file to me has sent it to a friend tomorrow, however, I do give data to the ecu and maybe ask him what tool has read this passat but it could also be a siemens ppd or not?

[ugoboss]

very likely it was read with a slave instrument, and it is encoded, otherwise read whistles for flasks.

[carlo abarth]

also the extension is not bin but ext!!! bha!!

[pabloescobar]

No hw and sw

[eobdexpression]

People today I had the opportunity to talk with my friend and I have updated the drivers, and the list of car of the mpps why? the read with that and pretty much the correggevo the cecksum automatically, therefore, read is yesterday, a file of 2 mb but incomprehensible, therefore, after the update of driver dell mpps repeat to re-read the file and this time in addition to get a list of pi? the latest update of the ecu so the higher the read corregendo in automatic the checksum in a file to 2 mb, but this time perfect, even why? titanium me has acknowledged quietly. Here is the file that is read if perhaps look to see if ? good (But I think that once I have ricconosciuto titanium problems there should be) it would do me a great kindness.

Now the only thing that I can not understand, and that given that it is a bosch edc 17 cp14 with mpps once bed perfectly correcting the checsum automatically would there be any problem according to you, to the writing of the file? Even why? this my friend is waiting for the arrival of the rooster v2 v53 then there are problems, or ? better than expected arrivals, the cock, and he writes with that.

Finally, I think that if the car were equipped with edc17 with antituning active at this time was not to make him not even read or not?

Thanks to all those that will be available to help him.

In the meantime, we place the data in the ecu with the original file read with mpps up to date list of the car v16. Here you are :

[sno74]

read with mpps that version the aluminum block or cable......... which update did you use.....

[eobdexpression]

Mpps cable version only upgrade to v16

[sportknight]

I would not trust with mpps...

[sno74]

ok I expect the v53 not ? I trust much to write with mpps......... then, especially in the serial........

[tecnoecu]

hello on those machines, the system antituning part in the second half del2009 if ? the first type you just make sure ke nn has made updates in the dealership and then if you want to write with mpps on edc 17 I advise you to correct the cks to the file, and nn get it done to the instrument in question xke sometimes patch. greetings

[eobdexpression]

Guys I recommended my friend to wait for rooster v2 v53 since ? much more? secure the machine anyway ? 2009 the year I do not know? what month, but if it was antituning should not even have it read, or at the most by starting the writing does not get it to start no?

I forgot also that mpps on the info below ecu data after the update is done in addition to the fact of having a list is also the correction of the checsum of the file in the automatic and in the info c'? written no antituning

[sportknight]

however, even with the cock, you should always make it in bootmode tricore,serial, not me closer to the...

[klajdin]

I with the cock, I wrote a Bmw Edc17 in the Obd, all smooth ! Of course, I made a backup first in the boot because I did not trust anything x, once the cock I would recommend you give it a read in boot tricore and then maybe we do all the tests that you want in the Obd.

[eobdexpression]

But as I say if the ecu was antituning c'? a way to recognize it? And if the ecu ? antituning the file to me has to do it read the same safely?

[klajdin]

If ? antituning or not personally I don't know to recognize it, if HW & SW complete here on the forum, surely someone I know? to answer you, but x that I don't know if it was antituning the control unit may block the reading temporarily, on the gallo2 if I'm not mistaken it should also give you the message that says to hold the camera in the moto x 30 min and then try again.. but with mpps I have no idea..

[eobdexpression]

If ? antituning or not personally I don't know to recognize it, if HW & SW complete here on the forum, surely someone I know? to answer you, but x that I don't know if it was antituning the control unit may block the reading temporarily, on the gallo2 if I'm not mistaken it should also give you the message that says to hold the camera in the moto x 30 min and then try again.. but with mpps I have no idea..

I have already? posted the file good with the ecu data

[pabloescobar]

Make a backup first and then do what you want

[eobdexpression]

Make a backup first and then do what you want

The friend of mine still does not ? practical for work bench in tricore, therefore, the ? arrived the galleto v2 v53 and read data at both the ecu and the map, why? however, I am far from him and I can not attend, and yesterday he sent me the ecu data reading is made and I think that the problems scriberla there should also be a priority watch? the cock has not recognized any antituning and based on the date of the software problems no there should be here is in the annex to the ecu data and full info

[klajdin]

Not ? just the fact of being able to write or not, but if it were to go wrong qlcsa how does then resume if he has a backup done on the boot tricore, reading in the boot you are encouraging affixed to x to avoid trouble later. Then some one does as he sees fit, but if you calculate that you must to pay a wire according to me it is worthwhile to fiddle with a p? of time.

[msport (exil77grande)]

we await your news about what happened,I don't like when you open a post for help, and then at the end you let them in half,each way, I've seen that mpps not the notes he wrote no antituning but if I have to be honest first I do not trust to mpps and second, even if the machine was 2008 and you have the certainty that it is not the outward bmw where they could update the sw, and then automatically make it antituning I would have done anyway to tour, despite having the equipment official however, the file can be read even if antituning the problem then arises in writing.