weird issue new 500

[mecdoc]

hi guys I have brought in the workshop a new 500 with a defect strange , after having switched off the ignition turn on the headlights just after 5min and I have noticed that if I turn on the high beams or the 4 arrows will turn off for about 1-2 minutes, but then come back on
I think it is the body, but before changing it I would like to be sure
of course, in the diag I don't have errors

[carlo abarth]

you opened you saw if ce oxide somewhere!!

[mecdoc]

yes, I checked everything ok

[carlo abarth]

then 80% of any relay that to be trouble!!!

[mecdoc]

then 80% of any relay that to be trouble!!!

do you think that you just have to replace it?
anyway, the strange thing ? who doesn't ? stays attached the relay but after a few minutes to get a signal that triggers

[legendaryslave]

If active, the headlights of a rel? must arm themselves for strength

[mecdoc]

but you do not think is a problem of rel? but of the erroneous signal that is sent

[todos]

hello, you should enter the body with the diagnosis and see the s? gives some error!!!!!!

[ducati83]

first try to change the rel? that controls the power-on headlights.....then maybe start work on the body....

[legendaryslave]

first try to change the rel? that controls the power-on headlights.....then maybe start work on the body....
the relay and in the body :cool:

[cinqueturbo]

Check out all the points of mass to the body..
also in the sides under the dash close to the goalkeeper..

[carlo abarth]

you first try a body!!!
do you think that you just have to replace it?
anyway, the strange thing ? who doesn't ? stays attached the relay but after a few minutes to get a signal that triggers

[munro]

check the dimmer switch lights......

[motorsport]

hi guys I have brought in the workshop a new 500 with a defect strange , after having switched off the ignition turn on the headlights just after 5min and I have noticed that if I turn on the high beams or the 4 arrows will turn off for about 1-2 minutes, but then come back on
I think it is the body, but before changing it I would like to be sure
of course, in the diag I don't have errors
I think I also and a problem of the body,anyway, let us know for curiosity?!!

[giordano_mecc]

I believe that the first step is to make a diagnosis of the body,seeing if there is a clue then. a. control to the power supply and to the masses. body,,if everything is ok. then you can try with a body used

[ducati83]

the relay and in the body :cool:

in fact, I would do the first tests with the body that I have and then change it if I can not come to **** the problem.....the body change them in fiat to do the tests....but cos? we're all good.....

[mecdoc]

I believe that the first step is to make a diagnosis of the body,seeing if there is a clue then. a. control to the power supply and to the masses. body,,if everything is ok. then you can try with a body used

as I said at the beginning of the post in the body there are no errors in over the car and all functions are in perfect working order the only fault ? this , it seems as if the function " follow me" you abilti alone ( in fact, with the car running or just ignition on, the headlights do not light up by themselves)
I also tried to unplug the dimmer switch but nothing

[explosion83]

the lights are turned on from the body, the first change you feel in the fiat though ? some sw update

[carlo abarth]

have they done any work on this car before you have this!!
as I said at the beginning of the post in the body there are no errors in over the car and all functions are in perfect working order the only fault ? this , it seems as if the function " follow me" you abilti alone ( in fact, with the car running or just ignition on, the headlights do not light up by themselves)
I also tried to unplug the dimmer switch but nothing

[mecdoc]

no the problem is ? presented from one day to another

[munro]

before changing the body...which I doubt could be the cause of the problem...I would try to do a proxy alignment...strictly doors are closed and all the devices off.

[mecdoc]

I tried with proxy alignment
but not ? changed nothing

[ducati83]

before changing the body...which I doubt could be the cause of the problem...I would try to do a proxy alignment...strictly doors are closed and all the devices off.

why? doors closed?

[giuseppe1374]

fabio tries a body ? useless to go blindly by them are managed these functions and from them was born the problem.

[carlo abarth]

does not cost anything to try a body!!!
fabio tries a body ? useless to go blindly by them are managed these functions and from them was born the problem.

[crteam]

to me capit? the same problem with the column switch fault.the trial one