Hand fuel Fiat Panda 1.3 mjt busted.

[Omt]

Reserve at 9, and a full 6 hours. I hope I made it clear... To someone ? ever happened to you?
In the diagnosis does not give any error.
Thanks to all who respond.
Greetings

[legendaryslave]

change the potentiometer in the fuel basket

[michele30]

I've done a lot with the problem of the hand meant that it was evil, but always in the scale.
If you exit out of measure, I would say pi? framework.
With the ignition switched off and remains at zero?
Once you have access, where the last?

[carlo abarth]

sel have disassembled maybe the hands are not stuck well..as did the km!!!!!

Reserve at 9, and a full 6 hours. I hope I made it clear... To someone ? ever happened to you?
In the diagnosis does not give any error.
Thanks to all who respond.
Greetings

[Omt]

Guys I'm attaching the photo to the ignition is switched on and the ignition switched off...look at that weird!! The framework I don't think has been dismantled since? has a number of miles and the owner He bought it new. Tomorrow me and the door in the workshop and I understand something...

[rondella72]

[Omt]

boo..***** and diagnosed the paintings you guys?

[legendaryslave]

unmount the framework lever and the hand and with the ignition switched off riposizionala to zero then diagnosed with the active if you do not change the framework

[Omt]

Ok I try tomorrow so then. Thanks

[FidodidoTuning]

on these and always float to replace.

I have read better discussion
? the framework that will be been tampered with.

[Omt]

Fidofido say that the float problems? Nn I had the time to disassemble xke I'm repairing the distribution and various things mechanical? I noticed that the float moves the hand, the cio? makes the run cn ignition is switched on and the ignition switched off. Same thing with the diagnosis. The hand is up and down?... But from the opposite side.

[ugoboss]

fdai one thing, unmount the framework leaves detached from the connectors 15 minutes and re-mounting it, and if the same just mounted the ignition switched off and the instrument.

[Omt]

Thanks ugoboss. Provo. X tool you mean the picture right?

[ugoboss]

Thanks ugoboss. Provo. X tool you mean the picture right?

you mean the instrument panel.

[Omt]

Guys, I solved it. Maybe the pu? be useful to someone.
After disconnecting the battery, then the connectors, check the float, and do various tests with the diagnosis...nothing, not working.
At the end I remove the picture, shooting the hand, after so many trials to get it replace in the right position (why? after you place it, well, I've turned the picture and continued to go in the wrong place), I was able to center the picture. Now it's ok, case solved.
Thanks to all for the help.

[gero]

quoto for the framework

[Omt]

I solved at least x time cn manual displacement of the needle. If it were to occur again change the picture. If you could change the machine to the customer first������

[carlo abarth]

I had the same problem these days and a moria !!! the fact also is the test after 3 days and resubmitted..........I'm looking for a picture!!!
I solved at least x time cn manual displacement of the needle. If it were to occur again change the picture. If you could change the machine before the client��