Sign in

View The Full Version : replacement ECU engine AUDI TT 8N MK1 with the ECU used



TTMsport
01-01-2014, 16:26
As the title suggests, due to breakage of the old engine control unit (not readable), I have to replace the ECU with a used one with the same codes in the ECU and software. The ECU in question, and' a ME 7.5, car audi TT 1.8 t 225cv four of 1999.
Wonder if someone has already experienced a similar case and if it is necessary to resort to the dealer for the exact coding of the control unit to the fni of the funzioanemento with all devices (butterfly, electronic throttle control, etc.) (immobilizer), or you can do the swap without too many problems without having to ask in an audi.
From someone I heard that for the audi, and I need to go to audi as they connect to the server of the mother house and download the configuration.
According to others, this procedure is not necessary on the car in question (1999) and argue that once you have put the immobilizer should work correctly (ECU with the same ID software/ecu).
Thank you and I wish you a good 2014 to you all.

carmageddon
01-01-2014, 16:31
normally you do everything without any problem, you just have to have the ecu with the same number of HW and SW and you can? : have immo active and alleprint original simply by moving the eeprom of the security from one ecu to the other, or the scodificare the ecu and true immo off

motorsport
01-01-2014, 22:58
I confirm procedure clean and without having trouble!!

Omt
02-01-2014, 00:09
This ? a question I have always asked and never faced! If I were to change a unit from one machine to another procedure/ tools I need to follow and use? I would not like to leave the offtopic cn qsto message. If in the case proves the sec wrong please forgive me.

gezame
02-01-2014, 00:38
Hello
There are many, many ecu, so many different procedures.
Some by moving the eeprom (or the data of the dump), the other by moving the flash (dump), the other two (eeprom+flash).
Other micro, etc, etc.

raffaell0
06-01-2014, 20:39
normally you do everything without any problem, you just have to have the ecu with the same number of HW and SW and you can? : have immo active and alleprint original simply by moving the eeprom of the security from one ecu to the other, or the scodificare the ecu and true immo off
If a nn has the chance? take the eeprom yet,or read it as you do? You take an ecu the same,you scodifica, then how can you activate the / with the same keys/transponder?

carmageddon
06-01-2014, 20:47
? need the ecu of the original car to pick up the eeprom of the safety to move to the ecu used...alternatively, only audi can? reconfigure the ecu...just as it does with the new cars.

raffaell0
06-01-2014, 21:19
The login code or carpass ? stored on the tacho or ecu? Why? I know that with vcds having the logincode, you can integrate keys ,km etc
So if the logincode ? stored in the ecu, and you can read and then use it to integrate the keys you may be successful even without the eeprom of the ecu the previous. Or am I wrong?
I want to know all the ways that lead to Rome.
Thanks

carmageddon
06-01-2014, 21:49
I don't know how to add additional keys, never done.

here it comes to the immobilizer, and what ? stored on the ecu the engine...the chance? ? immo off or immo original, in all two cases, it intervenes on the engine ecu

gezame
07-01-2014, 01:57
The login code or carpass ? stored on the tacho or ecu? Why? I know that with vcds having the logincode, you can integrate keys ,km etc
So if the logincode ? stored in the ecu, and you can read and then use it to integrate the keys you may be successful even without the eeprom of the ecu the previous. Or am I wrong?
I want to know all the ways that lead to Rome.
Thanks
Hello
The login code and momorizzato on the tacho and on the ecu.
You can leere for obd, but not with vag-com.

yannsaba
07-01-2014, 02:33
Having worked in the audi I confirm what was said above. With the tool and the official are you able to operate on the ecu directly by ricodifica0 . Alternatively, you have been shown the two solutions.

raffaell0
07-01-2014, 12:59
Thanks for the information mentioned, even if I did not open I the discussion, I took the opportunity to learn more? ;-)
I was interested to know all the possibilities? that one has, in the case of bad luck.
For the vag com, it seems to me you have read already? something about it. Type Dash com, carprog etc

yannsaba
07-01-2014, 13:14
for diagnosis, the official let's talk about odys, several operations of encoding are from their internal database.