Sign in

View The Full Version : elimination swirl opel astra h



ecuboost
28-12-2013, 11:41
as the title someone can? give me a guideline on how to eliminate the swirl on qst drive

cinqueturbo
28-12-2013, 15:22
as the title someone can? give me a guideline on how to eliminate the swirl on qst drive
6576

Hello Ecuboost port 0 from the 0E5AB4-0E5BFC and test..
with what lai read?
if lai is read by serial do not trust..
made a backup first with BDM..
or had a problem a while ago with one of these..

dvdtuning
28-12-2013, 18:03
I confirm to you that the map ? that...I run on a 120 hp, and for some time he turned on the light engine and then ? all went well. Read and written in the bdm.
I have not made a diagnosis later why? I have reported the car but the car is fine even when the light comes on.

ecuboost
30-12-2013, 17:14
ok thanks, I try, and then I read in the bdm?

cinqueturbo
30-12-2013, 21:32
ok thanks, I try, and then I read in the bdm?

That and better!..;)

zullo
30-12-2013, 23:15
not to be pedantic, but before doing this you are assured that the butterflies are safe in their own home and not escape some in the suction bending everything???
as the title someone can? give me a guideline on how to eliminate the swirl on qst drive
6576

dvdtuning
03-01-2014, 12:54
Guys just yesterday, the kind he called me because the car does not pull, the diagnosis of tongue-butterflies and circuit candellette with light engine turned on. I think it is broken, the motor of the butterflies, but I don't understand why it doesn't pull...in next week to see what I can do.

blackwolf76
04-01-2014, 00:35
I have placed some of those. What should you do ? disassemble the manifold and close the holes, of course, after you have removed the swirl, given that on several of those skip everything and remains the open hole, and close by the control unit serves little purpose, especially if the car has more? of 100 to 120 thousand km. If you have one you can spare them all the mange and install one of the fiat 140cv that ? identical, apart from the swirl. Of course, the starter motor must be operational and in place.

mafani
04-01-2014, 07:58
Guys just yesterday, the kind he called me because the car does not pull, the diagnosis of tongue-butterflies and circuit candellette with light engine turned on. I think it is broken, the motor of the butterflies, but I don't understand why it doesn't pull...in next week to see what I can do.

hello but you butterflies, you have removed?otherwise if they remain closed ? for what the car fails to climb rpm

dvdtuning
04-01-2014, 12:46
They brought me the machine after you have removed the swirl and with motor attached. I have 2 with the same problems, I have to make a diagnosis and see well the error codes, if I can do it in a day.

dvdtuning
04-01-2014, 18:22
I am attaching the file, on this car the mod swirl works while egr error p0400.

The ori can be found here: post 20
https://www.professionalchiptuning.net/showthread.php?93-Astra/page2

blackwolf76
04-01-2014, 22:34
Sometimes it burns out the motor. Cmq error egr not dovebbe be due to the swirl.

dvdtuning
06-01-2014, 18:25
No in fact. On this car I had only done the egr off and now also the exclusion swirl in the diagnosis remains fixed at 5%, while the egr is giving me 0%.

frantik3
06-01-2014, 18:45
but that I know the 8valvole 120 hp does not fit the swirl!!!!!

guidotacco
06-01-2014, 21:27
but that I know the 8valvole 120 hp does not fit the swirl!!!!!
I made a 15-day f? and the mounts!

frantik3
06-01-2014, 21:34
did you see physically or only in management?
why? in the management of the present, but physically no

mecdoc
06-01-2014, 22:20
and how does it work on only 4 pipes apirazione??????'

frantik3
06-01-2014, 22:22
and how does it work on only 4 pipes apirazione??????'

I ask I

blackwolf76
06-01-2014, 22:26
Group opel both the 120 and the 150 mount the same fiat 16v engine junction 147 140cv, and both of us are the swirl, unlike the fiat, where the 120 hp has 8v, and then nothing farfallette.

baraldino
06-01-2014, 22:26
I don't think there are any


Group opel both the 120 and the 150 mount the same fiat 16v engine junction 147 140cv, and both of us are the swirl, unlike the fiat, where the 120 hp has 8v, and then nothing farfallette.
If ? 16 v I rimangi? the word

blackwolf76
06-01-2014, 22:37
If ? 16 v I rimangi? the word
Trust that ? cos?;-)

dvdtuning
07-01-2014, 00:55
I confirm I have 2 with the same problems...then the diagnosis should see the real values before and after the mod and are not mounted? I know that the group opel there are definitely, in fact, I spoke with the mechanic asked me if you could remove the light once you have done the mechanical work.

frantik3
07-01-2014, 17:45
there are some 120 hp opel as the zafira, which are 8valvole, and have not then there might be versions that are 16, but I never happened to the ones that I happened to both opel and saab were 8valvole without swirl, but with management in the ecu

tezzero
08-01-2014, 00:10
Attention elimando valves sw open doors on opel 16v you ? generated an error that had to do with the speed? entrance of the air in the intake manifold by sending the drive in recovery (I don't remember the error code), not c? was nothing to do..I restored all the error ? gone.In my opinion, it was necessary to find the way to delete the DTC.

blackwolf76
08-01-2014, 00:22
I repeat that I have made patecchie simply by removing the swirl and leaving the motor without any error...

cinqueturbo
08-01-2014, 00:35
Me in curious trails this matter...
some problems "devastated"?
to others with no problem?

legendaryslave
08-01-2014, 01:03
I also confirm that I made different opel removing all the manifold including injection pump removed all closed the holes and locked by the map I never had a problem

baraldino
08-01-2014, 09:20
have you solved it?
last week I had a problem with an eighth note 1900 mjet eliminate the swirl from the map, the car was still in recovery because I had the electric motor locked
I have disconnected the connection and lit indicator ie but no recovery deleted dtc everything is ok

dvdtuning
08-01-2014, 13:21
By removing only the swirl physically without exclusion in the ecu, generates "dtc P1109 - high voltage circuit feedback actuator intermittent turbulence,"a time, excluding the error disappeared.

marco
08-01-2014, 18:29
hello dvd-tuning you have to take them apart physically made a dozen of these
They brought me the machine after you have removed the swirl and with motor attached. I have 2 with the same problems, I have to make a diagnosis and see well the error codes, if I can do it in a day.

dvdtuning
08-01-2014, 20:23
In fact ? what I have written.