MPPS flashing problem

[beriv]

Hello

I have a interface MPPS v12 China clone.
Be good to read a Point 1.3 MJD6JF.P3.
Make an error when writing to the controller.
Since then, the machine does not start.
It communicates with the controller in MPPS and Autocom.

How can I fix this error?
Flashing Cock or BDM100 ?

[cinqueturbo]

Hello

I have a interface MPPS v12 China clone.
Be good to read a Point 1.3 MJD6JF.P3.
Make an error when writing to the controller.
Since then, the machine does not start.
It communicates with the controller in MPPS and Autocom.

How can I fix this error?
Flashing Cock or BDM100 ?

To solved it?

[sportknight]

the mpps is not the law the complete file on the marelli,then when you go to write you lock the ecu,you should now write an original flash via bdm or you can try to write directly to a file with your number hw and sw cut to 1048kb

[carmageddon]

the mpps is not the law the complete file on the marelli,then when you go to write you lock the ecu,you should now write an original flash via bdm or you can try to write directly to a file with your number hw and sw cut to 1048kb

1024 = 1 mb

[sportknight]

you excuse ;)
anyway, you have to cut with ecm the files from 2mb= 2048
check user defined and enter in the first box 1FFFFF,in the second 0FFFFF
save the file and you'll get a file from 1mb to write with mpps,usually the marelli you manage to restore

[beriv]

Marelli
Multijet
MJD6JFHW01B
2003 Punto 1.3 JTD 70cv B-CAN EOBD
Num SW: 1064P348
Dis FIAT: 55186608
Flash file: 458 752kb Read ok.I tried X-prog-BDM, 10% l? off to read Megale.
We can not delete it written error.
BDM100-sub that knows how to read and write?

[carlo abarth]

if you want me to send you recovery!!!
Marelli
Multijet
MJD6JFHW01B
2003 Punto 1.3 JTD 70cv B-CAN EOBD
Num SW: 1064P348
Dis FIAT: 55186608
Flash file: 458 752kb Read ok.I tried X-prog-BDM, 10% l? off to read Megale.
We can not delete it written error.
BDM100-sub that knows how to read and write?

[carlo abarth]

if you have bdm looking for a bechup and put the flesch reading ease inside!!!

[beriv]

Read the MPPS:

[alex68]

best bdm in these cases

[beriv]

I need a kind BDM.
I can not download the original folder.
You might like to get to this file?
Marelli
Multijet
MJD6JFHW01B
SW CD: 1064P348
Dis FIAT: 55186608

[cinqueturbo]

Read the MPPS:

that problem with this file?
or realized that the machine will not run,
to tried to rewrite the file ori?
S? you,
you and he programmed the E2prom,
and you need to fix with a file ori is the encoding partial or total worked with BDM or some HW serial..

[beriv]

that problem with this file?
or realized that the machine will not run,
to tried to rewrite the file ori?
S? you,
you and he programmed the E2prom,
and you need to fix with a file ori is the encoding partial or total worked with BDM or some HW serial..

BDM ? a complete file to be
BDM does not allow the partial files r?t?lteni (EPROM, flash)

BDM ? a complete file to be
BDM does not allow the file written to partial (EPROM, flash)

[cinqueturbo]

BDM ? a complete file to be
BDM does not allow the file written to partial (EPROM, flash)

but that traitor do you use?

[beriv]

there are translation errors

[cinqueturbo]

BDM ? a complete file to be
BDM does not allow the file written to partial (EPROM, flash)


there are translation errors

You, wrapped and unclear..
I wish I could help,
but gi? to a limitation in the download, and then we do not understand very much..