PDA

View The Full Version : Problem remote control Smart



blackwolf76
29-11-2013, 22:26
I have a smart 800cdi of the 2004 workshop, which will not unlock the immobilizer from the remote control. Or, better, the car receives the signal from the remote control, begin flashing the 4 arrows, and will not unlock. If I open the door with the mechanical key and need to put in the bike will turn it all for? it remains the key turned on in the dashboard and not put it into motion.

From diagnosis to me from the erroneous signal is received from the remote control. From what i gather that should not be the remote control for? technically should not even receive the signal from the car, not that I respond as if it were segnalke wrong.

How could I solve it, if any ? gi? happened to you??

nox
29-11-2013, 22:34
? happened to me when I pushed the remote control the camera flashed many times but not opened and closed, and then when you turned the picture remained the key immo on the framework and started the solutions are 2 that I have the car in a Mercedes with a tow truck and you ricodificano the key with 40€ or so that you ricodificano with the diagnosis brain bee

blackwolf76
29-11-2013, 22:43
Since ? all broken the remote control it would be possible to use a new one to re-encode??

nox
29-11-2013, 22:54
You to me they have re-encoded one of the old 40€ And I have made a new one for 80€

blackwolf76
29-11-2013, 23:03
When ? cos? I know I should do it again...

fabio1207
29-11-2013, 23:39
But a second key to try don't you?

blackwolf76
29-11-2013, 23:47
Dead also...

carlo abarth
30-11-2013, 00:00
the same thing happened to me .. and the remote control that has lost the encoding prendene one and codificalo with the st6000!!!

fabio1207
30-11-2013, 08:48
I as said Carlo indeed a board, just take two and codificali both a stock should always be

nox
30-11-2013, 11:25
I 100%

blackwolf76
30-11-2013, 21:45
Solved with the brainbee of a friend. Thanks to all for the tips...

carlo abarth
30-11-2013, 22:24
I'm glad!!!!!

audi sp
30-11-2013, 23:09
even with a used one, you can encode it to another smart

blackwolf76
30-11-2013, 23:14
To try I have restored her, as soon as the recovery it settle for another if the customer wants it.

etkl
01-12-2013, 01:19
Maybe the humidity? on it is causing problems like this.

cinqueturbo
01-12-2013, 12:23
you've given a look under the driver's seat?
it was often the underlying e -...

etkl
01-12-2013, 13:23
Stay professional, we are still amateurs.

blackwolf76
01-12-2013, 17:07
In fact, I have not checked the various components around the car, as I do ? the remote control to have smemorizzato.... Also if there is going to say that ? by quite a bit, which sometimes went, and sometimes not, until it stopped working altogether.

cinqueturbo
01-12-2013, 17:08
I apologize, I had not read the whole discussion,
what that makes me in ca...re when it happens in my posts..
again sorry..

peaKpower
06-12-2013, 16:39
The remote control batteries are changed every 2 years, then there is an update for the ecu sam! you, unfortunately, in this case the only remedy, and recode !

gcesare21
06-12-2013, 18:15
I have a smart 800cdi of the 2004 workshop, which will not unlock the immobilizer from the remote control. Or, better, the car receives the signal from the remote control, begin flashing the 4 arrows, and will not unlock. If I open the door with the mechanical key and need to put in the bike will turn it all for? it remains the key turned on in the dashboard and not put it into motion.

From diagnosis to me from the erroneous signal is received from the remote control. From what i gather that should not be the remote control for? technically should not even receive the signal from the car, not that I respond as if it were segnalke wrong.

How could I solve it, if any ? gi? happened to you??

If you flash the 4 arrows by pressing the button on the remote control, the problem is made from the sam small to be clear, the problem is solved by a commissioning of the control unit, in diagnosis, you will definitely find in addition to bad signal the remote control is also a dtc type internal hardware error...

peaKpower
06-12-2013, 20:59
At this point, put in motion the small 800, which has large capacity dichilometri !:):D

Antonio46
13-12-2013, 01:58
I have the diagnosis brain bee, and this type of keys is done with a simple learning just a few minutes so

mar21
13-12-2013, 13:23
I use a program that makes the calculator , and that's okay!

gcesare21
13-12-2013, 19:29
I have the diagnosis brain bee, and this type of keys is done with a simple learning just a few minutes so

Match the remote control ? one thing, the blinking arrows in our case, it indicates a software error internal to the ecu, and you solve it only with the commissioning of the ecu.

Antonio46
14-12-2013, 17:18
You are diagnosed with Mercedes

blackwolf76
14-12-2013, 22:22
Maybe you ? missed the post where srgnalavo the solution of the problem with reprogramming the remote control.

Antonio46
15-12-2013, 14:02
Then the resolve with brein bee are you?

blackwolf76
15-12-2013, 15:35
Then the resolve with brein bee are you?
Yes... Riprogrqmmazione remote control