Sign in

View The Full Version : Egr Fiat Panda 1.3 mjt


MOT
16-11-2013, 10:35
Good day, I would like to remove an egr valve from a Fiat Panda 1.3 mjt, unfortunately I only have the MPPS V5, I should have reading and writing problems?
These are the data of the ecu:
Fiat Hawdware Number 51775008
Marelli Hardware Number MJD6JFHW01B
Marelli Hardware Id 00
Marelli Software Number 1092S163
Marelli Software Id 0000
Fiat Identifacation Number 6JF.S1
Fiat Iso Code 68070102C7
Fiat Tester Number
Programming Dates 08/11/2005

Thanks to all for the help that you offer
Backgroop
16-11-2013, 10:38
Hello, with MPPS, you can read and write quietly on the file of your panda a file 448kb.. for deleting the EGR if you are not in the care of someone
MOT
16-11-2013, 11:08
Hello, with MPPS, you can read and write quietly on the file of your panda a file 448kb.. for deleting the EGR if you are not in the care of someone

I honestly use carsoftware, has never given me problems, I also managed to delete the egr from a myth, only to read it I had to get a file from 2mb to cut it to 1 mb and edit it
Backgroop
16-11-2013, 11:12
I honestly use carsoftware, has never given me problems, I also managed to delete the egr from a myth, only to read it I had to get a file from 2mb to cut it to 1 mb and edit it
If you talk about the myth 1.3 mjet ok on other versions not to be cut.. I believe that on the 70cv should be good to go carsoftware, I close it manually
MOT
16-11-2013, 11:52
If you talk about the myth 1.3 mjet ok on other versions not to be cut.. I believe that on the 70cv should be good to go carsoftware, I close it manually

Ok so on the panda just read it normally, and then go to edit with carsoftware? without finding the file and cut it?
Unfortunately they are not very practical and I'm afraid to do some damage like ? happened on my machine

Thanks for the help
enzopezzano
16-11-2013, 12:13
go well with carsoftweare quietly.
Alfiuccio
16-11-2013, 12:23
I confirm what he wrote enzo change with carsoft and write easily without cutting file....
leandro89
16-11-2013, 13:34
the ecu data that you posted are of a 70cv, as gi? said read a file 448kb, reading time about 45min, modify and then write
pdtechnology
16-11-2013, 15:21
on this ecu to disable the egr, you must act on a bit that ori has as value 37ac and needs to be taken to b992 test ok?ciaooo
rts
16-11-2013, 17:23
Keep the battery charged in the read and write it with a power supply or cables and battery support, carsoftw should be ok for this
marcogti
16-11-2013, 17:46
as trempi of writing? to read it also I takes about 45 minutes . to write to me is little.
I confirm ?
enzopezzano
16-11-2013, 19:49
Yes! I confirm.
.Antonio.
04-02-2015, 16:09
For curiosity?, with FGTECH how much we put in to write this ecu in the serial?
Exelion1986
04-02-2015, 17:46
about 5 min
.Antonio.
05-02-2015, 07:18
Ah ok, so the reading is a lot, but the writing is almost nothing?
Exelion1986
05-02-2015, 08:56
I speak of the 6jf, 6f3, I have never written
however, in a couple of hours I can do 4 or 5 races including the tour on the road
.Antonio.
05-02-2015, 14:06
You, too, I'm thinking 6j, 6f, I have made several.
With the galletto it takes 90 minutes of reading and 50 of writing.
mariop1
hello
this post in old but I hope someone can help me understand. I would like to close the egr valve on a fiat panda 1.3 D in the year 2005. I would like to use a notebook with mpps v13 for reading and carsoftware to close the valve. I would like to know if once closed the valve with carsoftware, and saved the file. can I write it without cutting it? it is necessary to check checksum before writing?
thanks
Errecinque
hello
this post in old but I hope someone can help me understand. I would like to close the egr valve on a fiat panda 1.3 D in the year 2005. I would like to use a notebook with mpps v13 for reading and carsoftware to close the valve. I would like to know if once closed the valve with carsoftware, and saved the file. can I write it without cutting it? it is necessary to check checksum before writing?
thanks

As in every forum, usually, the first message should be in the section presentations

https://www.professionalchiptuning.net/presentazione-vf8.html
mariop1
hello
sorry, but I had already submitted some time ago. however, I showed up again.
sorry again.
Errecinque
hello
sorry, but I had already submitted some time ago. however, I showed up again.
sorry again.
For my lack of experience I have a pair of panda 70cv 6jf I have written with mpps as I read, without having to cut anything....
mariop1
For my lack of experience I have a pair of panda 70cv 6jf I have written with mpps as I read, without having to cut anything....
hello
thanks for the reply. can you tell me how to check the checksum? today and arrived mpps v13. now as soon as I procure a laptop, I read the ecu and then proceed with carsoftware, and after I write. but I need some clarification how to check the checksum.
thanks
thanks
Errecinque
hello
thanks for the reply. can you tell me how to check the checksum? today and arrived mpps v13. now as soon as I procure a laptop, I read the ecu and then proceed with carsoftware, and after I write. but I need some clarification how to check the checksum.
thanks
thanks

Mpps tells you if automatically corrects the cks, if yes, write the quiet.
mariop1
Mpps tells you if automatically corrects the cks, if yes, write the quiet.
ok I'll let you know.
thanks