zioweb

Hi guys,
an acquaintance of mine brought me this unit.
It seems that on the drive where it was installed a nice day, it started to give trouble with the CODE.
To this end, they have decided to scodificarla.
Now, the scodifica has made a person who does not know, but I have the files ori and what is loaded.
By comparing with that of the database of the forum seems to be well made, so I expect it to work properly.
instead the car every so often not because of the code, with all that has a scodifica total.
Once scodificata the ecu, it is necessary for the case to cut some wire, disconnect transponder or the other? Why? he doesn't have to do anything

egs

No...you try to put in motion without a transponder, if you mean the car ? 99% scodificata total, otherwise there are problems....

zioweb

ok, let's do some testing.
possibly, what kind of problems? advise me what to check?
I have the ecu here and I'm going to review the various welds since? to open it, and scodificarla ? was almost completely welded...

redline

the sin that was welded as with the right equipment, don't even need to open it, I don't ever open

zioweb

15-11-2013, 17:23

what equipment do you use?

egs

Yes, you just plug from the connectors..***** o do it before the proof of the key...

redline

zioweb

encode, but is much more

interesting, is it expensive? you know tell me some info on the manufacturer, etc.?

redline

zioweb

leandro89

every now and then a reading of the regulation does not hurt, be careful the next time

guidotacco

ok, let's do some testing.
possibly, what kind of problems? advise me what to check?
I have the ecu here and I'm going to review the various welds since? to open it, and scodificarla ? was almost completely welded...
almost certainly ? a problem in the ecu,first of all, the welds

glittering chiffon party dress.fitted

In the pm ? can have the link where to purchase this tool, thanks greetings

zioweb

Returned to the ecu.

Will update as soon as I know

leandro89

In the pm ? can have the link where to purchase this tool, thanks greetings

i am as you see, you are disabled for all then, a priori, you would be out of regulation

glittering chiffon party dress.fitted

It is then possible in the full respect of the forum leaving my **** have the link thanks to all the greetings

redline

guys, in fact, the regulation prohibits give link, or exchange messages in pm

zioweb

argument out of the question

leandro89

argument out of the question

if you have any complaint, please contact the admin of the forum using the button "contact us" at the bottom of the page, otherwise it does nothing but pollute the discussions

zioweb

Nothing to do, the car will not start. Probably you ? broke something in the operation of the desoldering and soldering

zioweb

Back on topic: we have a ecu "new" from scodificare.
Someone, maybe on Rome, and has the equipment to do it by comb cos? we do not risk other failures?
Let me know, thanks.

legendaryslave

Back on topic: we have a ecu "new" from scodificare.
Someone, maybe on Rome, and has the equipment to do it by comb cos? we do not risk other failures?
Let me know, thanks.
look, I make a cut with a flex (mini) from the part of the comb in order to operate directly from the e2p because desolder all of sucuro must be something wrong

zioweb

And yes, the same thing that they did on the previous ecu but you ? then fucking.
In order not to create more of a mess this time we wanted to do without desolder...

baraldino

hi guys
do I have to do scodifica total on stylus why? the customer has lost the transponder of the unique key
I don't know if I did well but I tried to load tested file posted on the forum

fail to attach the eeprom and the flasks ori

if someone could kindly give me a tip
thanks

legendaryslave

hi guys
do I have to do scodifica total on stylus why? the customer has lost the transponder of the unique key
I don't know if I did well but I tried to load tested file posted on the forum

fail to attach the eeprom and the flasks ori

if someone could kindly give me a tip
thanks
please try this solution

baraldino

today I try and let you know
thanks

I would say everything is ok problem solved since the customer has not called me back
while after the first attempt I had immediately called
thank you legend

legendaryslave

I would say everything is ok problem solved since the customer has not called me back
while after the first attempt I had immediately called
thank you legend

the file ? processed with original soft

baraldino

You can? say what?