View The Full Version : help before scodifica sirius 32n
I have to say I am a beginner so any advice ? well-pleasing, then I have to scodificare a clio 1200 8 v with control unit sirius 32n 110013800, I read with gqx4 the 29f200bb then I did with immodec
cut the wire 58 of the line immo but the machine doesn't start, the first attempt should not be the starter alert while on the second attempt, the motor goes but the machine is no ,and the red led remains solid . Aiutoooo
thanks
legendaryslave
09-11-2013, 17:29
you are decoded and re-encoded the file before sending it to the soft
I have to say that I know that there is an emulator in this unit, however, try with this:
legendaryslave
09-11-2013, 19:39
the eye that slammed the muzzle if the reading was done from the 29f200 with the programmer, the file must be decoded siemens the past in the soft recalculated the cks and recoded to be written directly in the flasks
faberecu
09-11-2013, 23:44
Immodecodind offers you a different file that processes the your on the clio has made a mess. You need to edit the file or post to read and immo dec
I hate to say this if the file ? read from flash with the programmer you have to decripatare the file and do the steps that was written before otherwise the car is not part.........
guys I'm sorry but with what decodifico siemens the file I gqx4 and ecm titanium, and how do you??????
ditto with the cks????
thanks again
I have made a I with ecm the steps are these....
Electric
10-11-2013, 11:48
I agree!!
prtroppo I can't download the attachments being a new enter
poterbbe this is the procedure 1 read with a programmer from the 29f200 format SIE . 2 convert the ecm from the SIE to the BIN
3 scodificare with es program meucci 4 calculate cks with ecm 5 encode daBIN in SIE 6 rewrite with the programmer the 29f200
? so or I'm wrong in something? the family of the cks x sirius 32 of the clio 1200 8v, what is it ?? the program x scodificare these sirius, what is it ??
I hope not to be too heavy and I thank you again
content txt
read 29f200bb with g4 adapter to 5v jumper
create a folder
save the file to the bed .bin
open titanium cliccaare on tools - encodings
search for siemens f200
load the file you saved from the reading of the 29f200bb
decode bin
upload the file with titanium
open sw immo select sirius 32 to load the file read with g4
save the file in the folder you created
open the saved file from the sw immo and correct cks
once the file is saved to the correct cks
open tools - encodings
search for siemens f200
click on encodings-sie
save a file with the extension sie diminutive of SIEmens
open g4
to write the flash to be erased, and then rewritten by selecting all files
load the file .sie and write....
legendaryslave
10-11-2013, 23:25
content txt
read 29f200bb with g4 adapter to 5v jumper
create a folder
save the file to the bed .bin
open titanium cliccaare on tools - encodings
search for siemens f200
load the file you saved from the reading of the 29f200bb
decode bin
upload the file with titanium
open sw immo select sirius 32 to load the file read with g4
save the file in the folder you created
open the saved file from the sw immo and correct cks
once the file is saved to the correct cks
open tools - encodings
search for siemens f200
click on encodings-sie
save a file with the extension sie diminutive of SIEmens
open g4
to write the flash to be erased, and then rewritten by selecting all files
load the file .sie and write....
you missed the important thing to put in motion
real sorry I add...
after the above-mentioned procedure, please put in motion the car....
but ? the game I'm car.....
for now, no, the machine also has the can line and the files that I have are not good , I know that I will have my bearings on some emulator
there riprovero soon
good job to all
if the need of a total you need to do with the emulator, otherwise even if they are not then it must be some things contakilometri...
but you wanted to make a total in the post you were talking about scodifica...
There is a distinction between scodifica total or partial.....
let's see if I understood scodifica partial in the control unit is inserted into a file virgin then you should recode in the starter ( e.g. control unit demolition)
scodifica total control unit and independent of the line anti-starter then you can? use for other machines
I wanted to do a total xch? this clio has problems with the keys every now and stays on the red light on the code and not part of the pi?.
Now I do not have more? the machine but there riprover? as soon as possible ,thank you so much x your availability? surely avr? still need
if you have the problem of code you have to make a total, but on these ecu if you can line you have to put the emulator..........
then do a partial then connect the emulator and the car part....
when you have a problem on the code if you do a partial fix as you said, it works for the ecu from demolition...
sorry,I had to deal with these sirius 32 scode tot, I confirm that the address ? null on ecu with can line,
but in the cases "no line can" I did all the steps SIE. The BIN. and still not able to do the calculation ceksum, the ecm of what I guessed,corrects the chek only if there are no changes to the inside of the tabbelle of the driver.
you will wonder how you fix the ceksum?
you'll understand that I never managed to set in motion these ecu if not with the emulator.
cinqueturbo
15-11-2013, 19:02
sorry,I had to deal with these sirius 32 scode tot, I confirm that the address ? null on ecu with can line,
but in the cases "no line can" I did all the steps SIE. The BIN. and still not able to do the calculation ceksum, the ecm of what I guessed,corrects the chek only if there are no changes to the inside of the tabbelle of the driver.
you will wonder how you fix the ceksum?
you'll understand that I never managed to set in motion these ecu if not with the emulator.
b? is a small mod and sound...
in fact,this ? the norm,for? according to m? in the sirius something is not right.
to be ir? clear:if I do the same mod. on the file or and file immo-off correction chek ? the same,(I can bring to ffff everything that I want out of the map indicated by the driver in the ecm,but saving not c'? no correction chek) from this I ? come to doubt that the end so I think it is correct only for changes interene to the maps of the driver, and that not c'? correction due to the changes to the part relating to the code.
what's that ? if we talk about other types of ecu.
can you confirm?
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.