Scodifica ecu EMS3132 renault clio

[angel]

Hi I have done other times the scodifica on these ecu knowing that you don't ? can make a total, and then I proceeded to the reading of the eprom a 29f200, I processed with the program I set the emulator and then I mounted the emulator.
Result: the car is not starting, the led flashes fast as when it does not receive the code, first try to see if the problem ? the emulator's fault, since that momentarily are not, I would like to know if someone ? so kind of you to check the reading and the mod of the eprom to see if ? everything is ok.


Ecu siemens ems3132 8200326395 8200326387

Thanks

[angel]

To update the situation, examining the car, I realized that this has the can line and not the line immo, so I think the problem at this point is in the emulator ? for units that work with the line immo.
Does anyone know of an emulator for these control units with can system?
Thanks

[SGHERRY]

hello,is total without problems from flash 29f200)under the can line part, however,is not working rev counter , temp, water, and air cond. just do some jumper and put everything in a function

[leandro89]

hello,is total without problems from flash 29f200)under the can line part, however,is not working rev counter , temp, water, and air cond. just do some jumper and put everything in a function

you ? gi? was told to introduce yourself since you have 16 messages, and have you still not presented

[SGHERRY]

hello,fal the tot on the flash...working 100%,then I'll tell you' how to operate what is nn

if you want to send the t.

[angel]

hello,fal the tot on the flash...working 100%,then I'll tell you' how to operate what is nn

if you want to send the t.

You can try, in the meantime, I took a emulator that also can, the reading of the flash ori l?I have already? posted.
Thanks

[SGHERRY]

hello,your nn serves,and' 8 or 16v,tell me where I can send it

[dvdtuning]

sgherry seen that ? a forum you could post your solution, otherwise violated the regulation...

[SGHERRY]

yes,of course, but I can not,tell me how to do it,it tells me the file is not valid

[dvdtuning]

You have to zipparlo otherwise do not load it.

[angel]

Sure, post it here, now I can't remember if 8 or 16v tomorrow morning we take a better look.

[angel]

Then the car ? a 8v
Thanks

[SGHERRY]

does not make me load the file it tells me that it is wrong..***** and I can?

give me a ***** you enter...

nothing, not even zipped

if you give me an ind ***** the sending

[leandro89]

It seems strange to me that does not insert it, follow the procedure well.

[msport (exil77grande)]

write step by step what you do.

[angel]

It would be interesting to understand how he did the friend SGHERRY why? I got an emulator that divrebbe work with the ecu can bus, but I don't get the desired result.

[SGHERRY]

I would like to attach it,I mode advanced and attached the file,if you load a photo, do it,if I want to upload the file to me nothing says wrong file is zipped and normal...

[angel]

At this point I ask to the administrator or the moderator if I can insert my **** in order to receive the material, sar? my care reinsert it in the forum.

[leandro89]

At this point I ask to the administrator or the moderator if I can insert my **** in order to receive the material, sar? my care reinsert it in the forum.

private contacts are prohibited in the discussions

[angel]

Then finally I solved: Scodificato the ecu on the 29f200 as if it were a Sirius32 and mounted the emulator directly on the chip of the CAN to the ecu, then I just had to jumper a relay for the starter and everything ? went ok.

[claudio]

You may have to kindly the total file for the eprom 29f200 ecu ems3132? and the instructions for the jumper to operate the air conditioning and various?
Thanks in advance

[kappaca]

uv hello angel can you tell me how is the procedure I the same problem thanks

[angel]

uv hello angel can you tell me how is the procedure I the same problem thanks

If you read a few posts back you will find how I fixed it anyway:
I scodificato the 29f200 as you do with the sirius 32n then I mounted an emulator can ( the car in question had the can ) directly on the chip of the can ( which now I can't remember the acronym but with a little research, you'll find him safe ) for the starter I had to report a negative, it seems to me, to the relay of the starter motor otherwise it wasn't running...
All here

[kappaca]

If you read a few posts back you will find how I fixed it anyway:
I scodificato the 29f200 as you do with the sirius 32n then I mounted an emulator can ( the car in question had the can ) directly on the chip of the can ( which now I can't remember the acronym but with a little research, you'll find him safe ) for the starter I had to report a negative, it seems to me, to the relay of the starter motor otherwise it wasn't running...
All here

hello then I have to give a negative to the relay starter motor because I did scodifica put the emulator I pulled the uch, but in doing so not spinning the starter motor I have to try to give negative to the relay starter motor

[angel]

I have not detached uch anyway you can do the test by turning the ignition and bridge the relay to the starter to see if...