View The Full Version : torque limiter
Hi all, as title I have this question mark in the head, I have my car a golf plus 1.9 tdi remapped that to me makes this joke in low gears, up to three thousand rpm is really pushing it, with the high gears the cio? the fourth and fifth after the three thousand rpm I can hear a slight drop in power, or as if you were stretching back. Now what I do not explain, and that if lower a bit the torque limiter behaves in a way if you lifted it behaves in another, but what is the right way to eliminate this problem and to get off the laps of the fifth the the most most cases without this loss of power????????
e-mail the files to us we will take a look, you will definitely receive some advice of some users espetro of our directors are involved is always the case when c'? in need of help.
mavaila1972
20-08-2012, 12:19
email the file ori and the amended certainly is the error
sa80libero
20-08-2012, 13:42
in that sense, it behaves in a way and in another, explains the symptoms and the tests that you did so we can help you...
I can't do it, how the hell do you post the file?????????
859 860 I guess I have bo
859 860 I guess I have bo
this ? the ori should post up the mod otherwise what do we see??
there are both golds that mod!
but the maps pedal and the torque limiters have them copied from the 140cv?!
well what do you think give me the reviews significant, as ever after the three thousand rounds, I feel a slight drop in power????
anyone that helps me????? beautiful
I'm not definitely an expert, however, I give you my: you've changed pretty much everything, with a logic not entirely wrong...? I would have gone for the step at the beginning without touching the injections zoned map1 and map2.
That said, in my opinion, the 3 maps of the limiter have been moddate evil. they differ from one another because? lead of the pi values? high in the original. You have moddato surely only the first and you copied the values moddati in the other 2... with the result that hai increases compared to the maps initially, but not in the same percentage.
try to correct this and see.
I also have doubts about the enrichment and acceleration, but I leave the word to the pi? experts.
sa80libero
21-08-2012, 11:38
quoto full
msport (exil77grande)
21-08-2012, 15:44
anyone that helps me????? beautiful
as you have been already suggested to be calm, that the advice they arrive,then the map completely redo,enrichment and acceleration all wrong, and increases in the negative,the egr is not excluded correctly,restart heat is not changed properly, and even you have changed the cold-start,turbo pressure too high fuel injection to be redone, etc, etc,maybe if it starts to map to the map, we can help you,definitely use the tabular mode' copy increments on similar maps and happens the mascello.
sa80libero
21-08-2012, 15:53
should be done in 2d sensa copiaincolla
My ? was a hypothesis, but I can see that others may come to my same conclusion, pi? or less.
Review the EGR and do not touch other things that are not essential to its avoidance.
review the torque limiters by applying a percentage increase on each, compared to the ori.
review the map "enriched" following the trend of the original.
leaves initially advances the injection of the original, then you do the test only on those at the end of the job (according to me)
maybe gi? so you can? then think if the problem persists
mavaila1972
22-08-2012, 12:29
as you have been already suggested to be calm, that the advice they arrive,then the map completely redo,enrichment and acceleration all wrong, and increases in the negative,the egr is not excluded correctly,restart heat is not changed properly, and even you have changed the cold-start,turbo pressure too high fuel injection to be redone, etc, etc,maybe if it starts to map to the map, we can help you,definitely use the tabular mode' copy increments on similar maps and happens the mascello.
I agree parts with a map at a time, and so you can get step-by-step
I'll see what I can do can you tell me the various percentages to be applied on the maps in qustione???
On the' enrichment ' parts a bit later and you're on the percentage that you were given initially: 8-10% if I'm not mistaken.
On the limiters if I'm not mistaken you have been on the 20%, and that's fine, but certain they were "copy"follow for each of the trend of the original, instead.
The turbo change it to points and not %, and only touches the maps main injection. Then see how it goes.
that means only the maps main injection?????
let loose of the advances for the time being...
experiment by changing every single map and see the differences
hahaha and according to you nicospl how many times should I upload the map to get to a good compromise.
The alpha on which I learned to map the edc16 has the counter scriptures to 40 now...
hahaha and according to you nicospl how many times should I upload the map to get to a good compromise.
Trying and retrying many times until you understand what you do
msport (exil77grande)
28-08-2012, 09:23
hahaha and according to you nicospl how many times should I upload the map to get to a good compromise.
Nothing wrong with that,many have had to do so
sa80libero
28-08-2012, 10:02
just doing the tests you will be able to really understand what to modify and what benefits they get from the various maps....
I would say that ? almost the normality?... that is expected to take the map, increases the two values and you're finished? ahahahahahahahahahahahah !!!!!
I was on my sid803 every now and again I experiment with :D
I was on my sid803 every now and again I experiment with :D
I also when I take the 5 minutes :D
I also when I take the 5 minutes :D
you also have a lioness ?
sa80libero
29-08-2012, 21:25
hehehehhe:D
mavaila1972
31-08-2012, 13:23
On the' enrichment ' parts a bit later and you're on the percentage that you were given initially: 8-10% if I'm not mistaken.
On the limiters if I'm not mistaken you have been on the 20%, and that's fine, but certain they were "copy"follow for each of the trend of the original, instead.
The turbo change it to points and not %, and only touches the maps main injection. Then see how it goes.
wide choice of up to 15% and limiter up to 20% of the vag have clutches good:)
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.