Sign in

View The Full Version : help scodifica golf 4 1.9 tdi 110cv


dvdtuning
21-10-2013, 13:26
Hi all, I wanted to know if you can help me to make the total on this car...
bosch edc15 0281001846.

As e2p has a b58253 that should be a 24c02 and not the flash.
Thanks in advance.
chicco
21-10-2013, 19:26
surely you f?, if you look in the various file scodifica find something that suits your needs, otherwise mail the file to see if I can help.
dvdtuning
21-10-2013, 20:02
Solved, thanks...
giuseppe1374
21-10-2013, 20:58
I'm sorry I arrived late
dvdtuning
24-10-2013, 21:06
The car lights lamp code and light the glow plugs with the total...
legendaryslave
24-10-2013, 21:13
The car lights lamp code and light the glow plugs with the total...
it is a normal stage with master black
chicco
25-10-2013, 08:48
you made it from e2p or eprom?
dvdtuning
25-10-2013, 13:11
on the 24c02
dvdtuning
25-11-2013 11:56 am
Hi all, I'm doing another that is giving me trouble...this ? a 0281010112 and I riverginato flash + e2p for the total, the car has a good 3/4/5 times with the usual lights are on, then suddenly no more, and in the diagnosis returns immobilizer is active, the fault is cleared, it starts again. Could be wrong, the decode on the flash? the e2p ? sure just why? gi? head.
egs
25-11-2013, 13:08
Flaw is only on the E2Prom, surely it will go? well... for the lights, you know, with the total remain switched on, tappale as said legendary....
obd75
25-11-2013, 18:01
you will find part of the changes for immo off reported in the o.r?(I mean both flash e2prom)
redline
25-11-2013, 18:11
guys I have stumbled upon something of the sort, and after testing and retesting the ecu was not able to resume more
obd75
25-11-2013, 18:30
? a edc15vm+?
once I fixed this by blocking the 24c04 (pin7 raised and connected to pin8)? if I remember correctly, the ecu does not store more? errors.
or removing immobox but if not I think I will not enter diagnosis.

dvdtuning
25-11-2013, 19:15
Then I knew that on the models that fit in the flash of the total is on both, while those that leap on the plcc is only on the e2p. I have tried both in this case, then I should just rewrite the ori and see if it goes?
legendaryslave
25-11-2013, 19:31
guys I have stumbled upon something of the sort, and after testing and retesting the ecu was not able to resume more
watch on the meucci is the e2p total no problem in the first shot
dvdtuning
27-11-2013, 18:10
we sincerely I tried today to process the file 24c04 with the meucci and comparing it to I have noticed that I only change 2 values, bringing them from the value 33 to 60, the rest remains the same.
The one that has worked for the total change a multitude? values.
carbo92
02-12-2013, 18:54
we sincerely I tried today to process the file 24c04 with the meucci and comparing it to I have noticed that I only change 2 values, bringing them from the value 33 to 60, the rest remains the same.
The one that has worked for the total change a multitude? values.
Exactly! The meucci does not go to me it worked only to the ecuvonix. Yet I would like to find a solution for the light of the glow plugs. Pu? be that in addition to the tape, that you can't? do nothing?
dvdtuning
02-12-2013, 22:22
Watch on this that I have done is flash that e2p it seems to me that the light was turned off is the one of the queues of the glow plugs.
carbo92
02-12-2013, 22:32
Watch on this that I have done is flash that e2p it seems to me that the light was turned off is the one of the queues of the glow plugs.

So you recommend me to desolder? I up to now I have always made tour.
dvdtuning
02-12-2013, 23:26
I unsoldered nothing, flash-to-tour and e2p with tweezers appropriate.
carbo92
02-12-2013, 23:33
I unsoldered nothing, flash-to-tour and e2p with tweezers appropriate.

In that sense? But you tried, always with the programmer eeprom?
dvdtuning
03-12-2013, 11:17
You wellon for the e2p with tweezers, mpps to tour for the flash...