Sign in

View The Full Version : Scodificare ecu edc 16c 35 bmw E60



scarface
20-10-2013, 19:05
hello all,I wanted to ask you for some advice on my problem.
I have to replace the ecu the engine of a bmw E60 DDE7 why? burned to the ground,not having the back up can I put a cenralina used with the same hw and sw only by changing the eprom 95320 or do I have to do the alignment cas dde.
in the case, I do the alignment, given that the diagnosis is not official, and not the year, these encodings l INPA could go well??

legendaryslave
20-10-2013, 23:12
de walk the e2p from an ecu to artra dovresi ritovarti a perfect clone and not mecessita encoding

sno74
20-10-2013, 23:46
off ep2 from the ecu burned out read it with a programmer without prejudice to the contents and then take the ecu used, put it in the bdm and write the saved file....From the reading of the file dap2 you should also see the series of sw dell ecu see if they are the same........

scarface
21-10-2013, 00:00
off ep2 from the ecu burned out read it with a programmer without prejudice to the contents and then take the ecu used, put it in the bdm and write the saved file....From the reading of the file dap2 you should also see the series of sw dell ecu see if they are the same........

Sorry don't ? the same thing to exchange the Eprom??

sno74
21-10-2013, 06:33
certainly that ? the same thing, but you have to see where they have placed ep2 then if it is in the bdm will also controls the sw, which is correct.....

scarface
23-10-2013, 22:20
I did the steps that you told me about you,but nothing is not part of the united states tells me not sync ok.

sportknight
23-10-2013, 22:42
you can not try to scodificarla?

scarface
23-10-2013, 22:58
my programs do not support this ecu,and then once I get past the e2p I don't think the pi? a code problem but more? alignment cas dde,since I have not been able to change the micro

sno74
23-10-2013, 23:13
if the copy in the bdm does not need to do any kind of alignment...... you have to pass all the data on the ecu demolition....

scarface
23-10-2013, 23:35
if you read the beginning I do not have the backup of the old,the problem ? just what

sno74
24-10-2013, 01:26
sorry not true I remembered you can always make a request of bk read in bdm put all the data that you have the ecu, maybe someone has any saving that you can? go well......

scarface
24-10-2013, 01:36
Also with another backup I don't do anything I have to do the synchronization DDE and cas. I have to see which tool makes it next to the original

sno74
24-10-2013, 07:21
for the cas, you can use the launch it certainly makes for synchronization DDE that I don't know what to advise you, to parts with moving ep2 then see what you need.......

chicco
24-10-2013, 08:39
I sno74, I have managed to start a x3 putting the e2p original on the ecu recovery and leaving the rest, I have not had to do any alignment.

scarface
24-10-2013, 09:39
I sno74, I have managed to start a x3 putting the e2p original on the ecu recovery and leaving the rest, I have not had to do any alignment.

I did the same procedure,but the machine will not run.
Now I test it without calculating the cks I don't want the problem to be him

sno74
24-10-2013, 10:02
ok car is not part of that fault have in your diagnosis....

giuseppe1374
24-10-2013, 11:32
it all depends on the cas ? mounted you have to align it with the bmw diagnosis.

scarface
24-10-2013, 12:04
as the error I get from tampering ews and then errors unknown

chicco
24-10-2013, 14:42
the error tampering ews ? caused by the failure to align the ecu and ews, I think the only solution is to go to bmw, at least, that there is a software that is able by reading the dump of the ews to get the data to write in the' e2p ecu.

giuseppe1374
24-10-2013, 20:51
to my advice you should go to bmw for alignment, or from someone who has avdi arbitres, I see no other alternatives.

SGHERRY
27-10-2013, 19:18
hello,I'm sorry but you will',has lost alignment,sometimes it can also happen by reading in the bdm,and rewriting only the flash maybe x map it,and not even if you write the backup complete!!!bmw, unfortunately, and so,the systems with the bmw diagnosis!!

passion engines
27-10-2013, 19:30
Hello, with these cars ? easy to be blocked, just that the ecu removed to turn the key with the battery connected and here is the error ews even though the ecu ? your, not you're do nothing you need to align everything.....

scarface
27-10-2013, 20:14
It is, in fact, I solved it by doing the alignment cas DDE

leandro89
28-10-2013, 00:04
hello,I'm sorry but you will',has lost alignment,sometimes it can also happen by reading in the bdm,and rewriting only the flash maybe x map it,and not even if you write the backup complete!!!bmw, unfortunately, and so,the systems with the bmw diagnosis!!
Am I wrong or have you still not presented

msport (exil77grande)
28-10-2013, 08:17
Am I wrong or have you still not presented

exact leandro the guy I had escaped so kindly since you have 12 messages I invite you to introduce yourself in the appropriate manner in the appropriate section.

SGHERRY
02-11-2013, 08:50
hello,thanks x the kindness,I'm sorry x the presentation,the "guy" is called gabriel...