***********

[iaio92]

hello all,

[giarras]

then do so?:
install the drivers of the elm
attack of the elm to the usb
go to control panel, device manager and see the com

hello.

[iaio92]

ok try now....... :)

[giarras]

ok try now....... :)

have you solved it?

[cjack]

when you turn the key, wait a few moments before clicking on the connect... sometimes to me it fails the first attempt, then I click again and it goes... do some test...

[iaio92]

I have not had time because of work... tonight maybe if I can I will try..........

[iaio92]

I tried, I try to connect and it tells me that my elm does not support the can-bus line........ I have to make the change and it works???

[giarras]

I tried, I try to connect and it tells me that my elm does not support the can-bus line........ I have to make the change and it works???

aim? there are of elm of very poor quality? that are going crazy in the can, anyway you can? to make the change.

[iaio92]

how do I do x to make the change that functions in the can???

[giarras]

how do I do x to make the change that functions in the can???

here you are served...good job
https://www.professionalchiptuning.net/showthread.php?447-modifica-elm-327&p=3900#post3900

[iaio92]

I do not have permission to view the page.. how can I do???

[giarras]

I do not have permission to view the page.. how can I do???

to participate in the forum that soon you will be able to download

[iaio92]

I participate for? I can't even spam to get to 50 posts.....

[giarras]

you might want to start that, maybe post some files ori so enrich the database I recommend you post in the correct way so? maybe administrators don't go crazy to fix them.

[admin]

Do as you say giarras I highly recommend you post it in the correct way
-brand
-model
-type ECU
-hp
-displacement
-hw
-sw
All of this semplificher? the research
Of course, try to participate in discussions, and if you can help
where can you

[mavaila1972]

here you are served...good job
https://www.professionalchiptuning.net/showthread.php?447-modifica-elm-327&p=3900#post3900

see the instructions usually there and do the editing on the smd resistors on the pcb

[iaio92]

[iaio92]

I managed to download the file and watch it.. my model of elm ? different from the one in the picture, in fact quelkla resistance that c'? between the pins 14 and 6 is not c'? I.... how should I do??

[zioweb]

follow the pin and the card, even if different is what? the resistance-to-remove... of me ? gi? happened and I have done so?...

[iaio92]

if you post a picture, maybe t? can you tell me what'? .... but if I pull out the resistance then I have to put the two resistors and the capacitors, as in the picture posted???

[zioweb]

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa

[giarras]

E-mail that we see. I the resistance of the took off and just if no I did the reset deltagliando on the alfa

the resistance was removed to the old 1.2.

[giarras]

if you post a picture, maybe t? can you tell me what'? .... but if I pull out the resistance then I have to put the two resistors and the capacitors, as in the picture posted???

but don't vilify! prendini a gi? modified x what it costs, ask in the shop of the forum they will advise you.

[bernardo943]

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine ;)

[bernardo943]

Have you installed the drivers ??? I have it set to elm 327 1.4+ and it works fine ;)
elm 327 1.3 excuse :)

[afortunao]

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings

[msport (exil77grande)]

I can not see the file as I'm sure you collegher? with the password ... But I can say that there are several things that you can do to make it work better ELM327.

And 'to change the resistance of the termination of the line also depends on the type of interface you need to do one or more? amendments.

In addition, it should be noted that the unit? control are connected by means of pins different ? state the interface is configured ? also able to give that to say that the judgment fails to connect.

At the time of the completion of 50 my post in this forum, I put? a list of scholarships and the pin of the communication.
Greetings

the 50 messages are used to download,view, screen, or ask for a pass for the rest you can upload what you want.

[checcosassu]

I solved it by removing the r04 and r14

[dreamc85]

the change you can? do as well on the grips bluetooth?

[SlimPickens]

If ? need to s?. I'm on one of the two that I own, I made it and it worked. Bluetooth/USB ? only the "method" transmission of data, but the circuit in the s? ? that.

[dreamc85]

I know that you have to remove the resistors could you tell me which? the change allows you to enter in the airbag control unit, abs and power steering?

[SlimPickens]

[dreamc85]

I invite you to read the rules

[Peppino91]

but don't vilify! prendini a gi? modified x what it costs, ask in the shop of the forum they will advise you.

Sorry if I'm intruding....do you have any contact of someone who sells them already? changed?

[dreamc85]

I've seen one for sale with the switch, maybe it works, if no s? who could modificartela... I just wanted to find a way not to stay them to edit and so on...

[Peppino91]

[dreamc85]

I passeresti the link to see it? thanks!

[Peppino91]

I passeresti the link to see it? thanks!

moderated message

have you read the rules? if you have not done so, I invite you to do so

[dreamc85]

thanks! however, the eye in the ad says that you need the 3 cables to use it to the full perhaps ? better that t I sent I that has the switch to change the internal contacts...

[Peppino91]

thanks! however, the eye in the ad says that you need the 3 cables to use it to the full perhaps ? better that t I sent I that has the switch to change the internal contacts...

unfortunately for my 500 is not good kkl.... ugh, I could have saved a 15ina euro uff

[dreamc85]

wait that's not ? only kkl but ? a socket interface as the three sockets, the cio? instead of going? have of the cables that move the output pin of the socket you have a switch that f? this game... according to me it should do...

[Peppino91]

[dreamc85]

in which case you use?

[Peppino91]

Litronic XENON headlamp...I have no idea what they are...

[dreamc85]

to enter in the control unit of xenon lamps...

[dreamc85]

I think that is the one!

[Peppino91]

I think that is the one!

I can not understand what sense it makes...? I think you are talking about ecu as you say you

[dreamc85]

I think they can go in error too, put that tilt something, so you can understand cos'? the fault...

[Peppino91]

In fact, you're right

[dreamc85]

as in the airbag control unit, just a fake contact and goes in error...

[angelus.d87]

[Peppino91]

I don't know...you'd have to ask someone more? expert...but you've got the cable version?

[angelus.d87]

I don't know... I just Know ke the chip inside and a fdti 232rl

[Peppino91]

no I say ? the bluetooth version?

[angelus.d87]

Ah no, and the USB version, I prefer

[Peppino91]

ok, perfect...it seems strange to me there is latency...throw l?....have you tried to change the usb port? maybe if you have two on one side of the pc and one on the other side...do you prefer the single..

[angelus.d87]

I also followed a guide found on the internet.. Cio? go on the device, click advanced, and change the latency and set it to 0 xo at the beginning nn I says nothing then it starts to break

[Peppino91]

[SlimPickens]

[angelus.d87]

Is it the connection is made xk are entered into the airbag, and I deleted the error

[SlimPickens]

Ok...you probably have it already? tried it, but in the options c'? an entry for the high latency. Have you tried to put the check mark l

[angelus.d87]

No this pension nn I tried it.. The prover?

[Peppino91]

No this pension nn I tried it.. The prover?