scodifica sagem S2000

[Backgroop]

hello all, I find myself with an ecu sagem s2000 mounted on a renault twingo, I should make a scodifica, in practice, this unit was already? touched by others without obtaining the results, the problem is now that was compromised and now the car is not even accelerates.. someone has a file immo off tested by download inside the 95080..

[legendaryslave]

I am attaching a file ori, and a immo off do you know if it goes to the end of bion
ps Cut the wire F3, and F4 for the total

[Backgroop]

Thanks for now legendaryslave the wire F3 of the immobilizer, I knew it.. tomorrow I try and let you know..

[Backgroop]

The scodifica of the ecu is not to be the car is not starting, I put the file that I had read, the car is in motion but does not accelerate..

[nox]

Sorry if I open this discussion but the thread f3 and f4 where on the ECU ? On which connector ?

[legendaryslave]

Sorry if I open this discussion but the thread f3 and f4 where on the ECU ? On which connector ?

The middle connector if I remember correctly

[gadroulll]

the renault s2000rpm cannot be done off , you make the eeprom 0000......... and you program to car

[scican25]

hello all, I find myself with an ecu sagem s2000 mounted on a renault twingo, I should make a scodifica, in practice, this unit was already? touched by others without obtaining the results, the problem is now that was compromised and now the car is not even accelerates.. someone has a file immo off tested by download inside the 95080..

hello , then you're able to scodificare this ecu ? but the car I had the ecu code ?
I should socdificare a s2000 to a twingo and mount the ecu code black , but it is feasible scodifica ?