Gianluca84

Hi guys, I wanted to ask how do you know which driver to use when it has to do with the ecu already? mapped? ECM I do not detect the driver, and between the ecu id and the codes of the driver I do not find any correspondence. I tried to check through cecksum and, strangely, not even the one that corresponds with no driver that I have.

I have to do with a touran 1.9 105HP automatic 2006, EDC16U34, and the codes are 03G906021AB and 03G906021MG

leandro89

specifies whether ecm titanium or ecm 2001, in the case of titanium, you have to put manually by choosing among the list of driver

Gianluca84

msport (exil77grande)

Hi guys, I wanted to ask how do you know which driver to use when it has to do with the ecu already? mapped? ECM I do not detect the driver, and between the ecu id and the codes of the driver I do not find any correspondence. I tried to check through cecksum and, strangely, not even the one that corresponds with no driver that I have.

I have to do with a touran 1.9 105HP automatic 2006, EDC16U34, and the codes are 03G906021AB and 03G906021MG

03G906021AB and 03G906021MG these codes are neither hw nor sw can be proved that li has generated mpps,to know the driver corresponding loads the file and then click on info where you can find or hw and sw, or only the sw take the last 3 digits and find the driver .

Gianluca84

In fact, I read them in mpps by clicking on the Info the ECU or the ECU Id (now I can't remember exactly) and I thought they were valid. I checked with a file that had the original and obviously corresponds to the group of 3 digits to the end. Now I don't have that available to the touran mentioned before but obviously will? in the same way... in the Meantime, I just tried to "steal" the file of a micra 1.5 65HP is right to look at the com'? done but it has some info and does not find a suitable driver. In this case, how to proceed? C'? some error in the reading? Or this type of power has a "encoding" different?

Meanwhile, thanks to the msport for directions!

leandro89

some file that loads on the ecm are devoid of info, like for example the maps of some of the siemens

Gianluca84

In this case, it is a deplhi and not c'? any information on the ECM. So I should only hope that someone give me the addresses and names of the maps?

leandro89

if you attach the map that you've been to make the work more? simple

Gianluca84

Of course, gladly!

ugoboss

Hi guys, I wanted to ask how do you know which driver to use when it has to do with the ecu already? mapped? ECM I do not detect the driver, and between the ecu id and the codes of the driver I do not find any correspondence. I tried to check through cecksum and, strangely, not even the one that corresponds with no driver that I have.

I have to do with a touran 1.9 105HP automatic 2006, EDC16U34, and the codes are 03G906021AB and 03G906021MG

here we speak about a touran 1900 105hp and then places the file in a nissan micra 1500, but how the heck we are, guys, if you want help you need to post with policy otherwise you will lose time and that's it!!!

ugoboss

if you want to help for the micra open a different place without going OT here.

Gianluca84

Hello ugoboss, the title of the discussion ? for the "choice of the driver" and if you read on to the touran mpsort has already? abundantly answered my request. Since the file of the micra is the same argument it seemed to me almost? no need to open another thread with the same question and from time to time without the policy, it seems to me. I attended the forum for many years and usually the purpose ? try to break as little as possible the information. In any case, I apologize to the staff if the question ? off topic and follow? your directions.

ugoboss

13-10-2013, 12:14

I'm not staff, I only said what I think, then, if I have wrong and I patience, but for me it works in another way.

Gianluca84

13-10-2013, 12:25

Sar? the admin or whoever it decide, and I think that the discussion is not the best of course quality? the topic then the chiuderei qu?. Thanks for the advice anyway...