egr fiat scudo

[elmont1985]

I have been asked if it is possible to remove the error of the egr on the van fiat scudo 2010, the mechanic has already capped and has commanded the egr leaving it plugged in, but error egr on the dashboard, they are now looking for the' programmer to perform read and change ****llo of the egr, a seller advised me software a time with the programmer mpps v. 13, according to you it is valid? I also read on the net that you just need to put a resistor of 9 ohms to eliminate the error?

[Backgroop]

hello elmont1985, as the first thing you have to see that the operation of the electronic mounts on the car, very likely it is a siemens sid 803a, this ecu read with a gallov2.. the rimozzione of the egr not ? simple if you have no experience, I would recommend you to read the file and send it to someone with ir? experience, I post it here on the forum, waiting for some pious soul to give you help..

[elmont1985]

thanks backgroop, electronics and siemens 803asws4,read from the terminal, texa,then tips the cock v2 not the mpps ,I also tried to enter in the store of the forum, but I don't see the link to the store,bserata

[Backgroop]

thanks backgroop, electronics and siemens 803asws4,read from the terminal, texa,then tips the cock v2 not the mpps ,I also tried to enter in the store of the forum, but I don't see the link to the store,bserata

if you are interested to buy from the online store of the forum I would recommend you contact the admins..

[elmont1985]

thanks, bserata

[alex68]

mpps nn the law, then if c? l error in the recov the car and read and write with a rooster without problems the eye on the battery voltage, the rest made to make the map with error code off.

[elmont1985]

thanks alex,vedro'to buy a chicken,then place the file,bserata

[motorsport]

buy first,then email the file to help you!!

[elmont1985]

thanks,before I buy the prog, then lightweight files and the postero' bserata

[nero]

hi guys..sorry for the ignorance... can I ask what is the rooster? to elaborate???

[legendaryslave]

hi guys..sorry for the ignorance... can I ask what is the rooster? to elaborate???
? a serial programmer bdm jtag used mainly and only in the field of automovie-track-bike

[gick]

the erg of the shield has to be a part of electronic, mechanical, stopper you can? plug only the mechanics? it serves no why? you bust all the parameters to the control unit and blows out the error, according to me you should exclude it electronically, I would recommend you also take it apart and clean it well in a way stapparla but I think that now is just a waste of time, and if you have damaged the mechanical part after maybe the risks that will remain locked open ? even worse