View The Full Version : egr off ford fiesta 1400 tdci
street racers
19-09-2013, 09:42
hi all does anyone know if you can esludere the egr from the ecu on this car?? I have tried both time carsoft nn do..... I enclose data and golds thanks in advance!!!
the usual sw that there are around nn make this work on this ecu, please contact the team to pay for the files ? you are at the place.
street racers
19-09-2013, 10:42
ok.......thanks
Alfa159 q4
19-09-2013, 10:59
If the car does not ? one of the last models with the egr electronics, caps with sheet and not the light comes on
street racers
19-09-2013, 13:22
In 2004......
magi1984
19-09-2013, 14:10
pu? have sid804 or sid206, in both cases you can? close the egr from the map
street racers
19-09-2013, 16:29
and a sid 804
angelus.d87
03-12-2013, 20:40
No one suggests that at least one solution?
street racers
04-12-2013, 00:20
I believe that's not to say...........
ecuboost
04-12-2013, 01:44
many resolved by disconnecting the plug and removing the dtc on the map
street racers
04-12-2013, 01:51
thanks ecuboost!!!! ;)
angelus.d87
04-12-2013, 07:11
To this solution, I feel the problem and find the dtc on the map one already I had tried to help.. I Do diagnosis with forscan the error was the p0406-60 that helps me put the map and instead of the one hour mark p0406-70 then nn has helped me the most
if you want to try paves the panettone that titanium called torque limiters from 071e67 to 071e97
street racers
04-12-2013, 09:23
thanks prover?!!!
thanks prover?!!!
No, absolutely not. On this car, there is certainly the solution for the egr without removing the DTC from the map.
street racers
04-12-2013, 12:07
what would it be?? if it's not a secret....
what would it be?? if it's not a secret....
I don't know if I can post why? I know that a solution in the forum already? c'? but ? been moved into the area off limits
what would it be?? if it's not a secret....
I make my test, it does not cost much time.
angelus.d87
04-12-2013, 14:01
if you want to try paves the panettone that titanium called torque limiters from 071e67 to 071e97
Nn I think they are the ones
street racers
04-12-2013, 15:28
I try ugoboss!! as soon as I ricapita the car if you make the case, I'm post and friendly when I had the car on hand nnmi one answered....anyway, thanks to all!!!
I'm sorry but they are not the addresses indicated by ugo! The egr ? quite a while before...
angelus.d87
04-12-2013, 18:09
I have the same makkina, and I am very interested.. Anyway already? I knew I ke those addresses nn nothing to do
I'm sorry but they are not the addresses indicated by ugo! The egr ? quite a while before...
I said if he wanted to do a test, there are other addresses that may be ,one and the 06ddbc, but you need to test it, I believed that he had the machine posteta hand, if, then, you know, why not help him, the forums are for this we should help one another, not to say I know, only.
I said if he wanted to do a test, there are other addresses that may be ,one and the 06ddbc, but you need to test it, I believed that he had the machine posteta hand, if, then, you know, why not help him, the forums are for this we should help one another, not to say I know, only.
And' what I want to do but, as in other discussions I have read that the solution was moved to section off limits, I do not want to go against the rules of the forum. Everything here
And' what I want to do but, as in other discussions I have read that the solution was moved to section off limits, I do not want to go against the rules of the forum. Everything here
if you flour your lot because you can not post it, you have given an eye to the address that I added above.
street racers
04-12-2013, 21:48
that's exactly it!!
angelus.d87
05-12-2013, 07:44
Calm guys cmq nn if the file or nn put the screen and put it addresses only nn I don't go against the rules
Calm guys cmq nn if the file or nn put the screen and put it addresses only nn I don't go against the rules
I put the addresses because of street racers can not see it to download attachments.
angelus.d87
05-12-2013, 09:14
Today I try to 06... over-torque them, I just let it be...
Games from 06A12A then you will see for yourself ;)
Games from 06A12A then you will see for yourself ;)
strange because I those curves and them I try to pave a fiesta and diagnosis continued to work, very ptobabilmente I had escaped something.
street racers
05-12-2013, 11:08
as soon as I have the car I try, or at least the files I have on the pc intent I make it then I can just write it!! thanks
angelus.d87
05-12-2013, 15:42
see if it goes bn
I tapped through the sheet and then I pulled the plug according to you works anke if reattaching the plug???
in total, there are 6 curves
see if it goes bn
something is missing still...
street racers
05-12-2013, 16:35
unfortunately I can download attachments........
angelus.d87
05-12-2013, 16:40
that..... nn talk about meta... more next, there is a peak and I stopped them to look at, but more? forward nn, I went there
the cio? va mica and so right ke can you post the file and I can download the first 80 messages
I would put to zero the bit to 06de1e
angelus.d87
05-12-2013, 18:39
The Cio? at the end of the curves
street racers
05-12-2013, 22:03
something is missing still...
you could not be more clear???
The Cio? at the end of the curves
you in the end there is a bit still raised.
angelus.d87
06-12-2013, 12:23
here is here, and we hope ke funzionaa
but you are editing in 8-bit or 16-xk I did it at 16
Not good... I have given you an exact address to where to start and you have changed anything... bo!
angelus.d87
06-12-2013, 13:58
you're right I was wrong totally ... see this
Not good... I have given you an exact address to where to start and you have changed anything... bo!
very likely to be wrong with the address posted by me in the beginning, the address where to start angelus.d87 and this......06a12a in 16bit.
street racers
06-12-2013, 14:15
Pity that I can download attachments........at least I gave them a hand
angelus.d87
06-12-2013, 14:26
very likely to be wrong with the address posted by me in the beginning, the address where to start angelus.d87 and this......06a12a in 16bit.
it is, in fact, and just so
street racers
06-12-2013, 15:29
It would seem that
angelus.d87
06-12-2013, 15:41
so now I can try
Tried.... At around 2000 rpm and the car shakes and makes white smoke.... Error in the ecu, p0214 cio? cold start injector 2.. Then I put there the map orig and it took 3 tip and about 5 minutes to recover x
at least one tip maybe the right one
Tried.... At around 2000 rpm and the car shakes and makes white smoke.... Error in the ecu, p0214 cio? cold start injector 2.. Then I put there the map orig and it took 3 tip and about 5 minutes to recover x
Angel forgive me, how do you expect the machine to go well? In the file 3 the egr ? closed well, but the changes that you made in the previous steps you have left! It is normal that the machine goes bad..
street racers
07-12-2013, 03:15
then the right solution and make changes in both the 2 and the 3???
at least one tip maybe the right one
has reason carlo remove the change to 06ddbc and leaves only the 06a12a
angelus.d87
07-12-2013, 09:19
I really did a fuck... Sorry guys but yesterday I don't know where my head today and try again
Ah anyway I appears anke another error ke makes me turn on the light of that? p0100, in fact, the diagnosis says ke is the light and turned on x this error ke me.. it Would be the maf ke by pi values? high, nnt you can? do? Type, erase the dtc from the map?
then the right solution and make changes in both the 2 and the 3???
And in the 3 xo you have to do it again
but x be kiusa it should be at 100% or at 0%
street racers
07-12-2013, 10:59
well, of siolito in diagnosis when the close must be set to zero
angelus.d87
07-12-2013, 11:13
I know how ke egr 3 that there was the change was to 94% then nn and
I had said the previous page that a change in diagnosis I saw her work.
angelus.d87
07-12-2013, 15:38
Here are affixed nn was not even what he said carlo
street racers
07-12-2013, 16:04
Obviously you....
angelus.d87
07-12-2013, 20:24
See ke has carlo
See ke has carlo
Who ? Carlo excuse?
angelus.d87
07-12-2013, 21:13
I wanted to say carbo
The address for the egr you part from them, now I don't know if in your file you uploaded c'? a few other changes, strange as the one before it
angelus.d87
08-12-2013, 10:05
Asp edit strange or no if the egr varies the values of mean ke it works... Then
Asp edit strange or no if the egr varies the values of mean ke it works... Then
Just having overlooked a bit in order not to operate the change.. at least to me, has always worked so I don't know what to tell you wait for the opinion of others...
angelus.d87
08-12-2013, 12:58
You have checked the file?
You have checked the file?
Apart from that, the jelly is ready, I can't just give you this... and then the file you uploaded is not the one you posted as the last one you uploaded was not done well. I think I helped you enough I said the exact addresses pi? of this I can not I'm sorry....
angelus.d87
08-12-2013, 15:51
check this
street racers
09-12-2013, 00:00
if carbo works 2 are the things or nn we do it well, or carbo nn has said it all....
angelus.d87
09-12-2013, 00:37
I am the last file I uploaded I put it in the discussion now it is up to him to control it, if we truly want to give a hand.. if he wants to continue to offend with the jelly is ready, etc.
street racers
09-12-2013, 09:34
not only do the tests....... a real hand and its difficult to find the people from......unfortunately they are all a p? gelosini!!
pabloescobar
09-12-2013, 13:10
Test and let me know
Hello
msport (exil77grande)
09-12-2013, 16:32
not only do the tests....... a real hand and its difficult to find the people from......unfortunately they are all a p? gelosini!!
jealous or not the info we are then, if you the file nice and ready then the question changes.
I am the last file I uploaded I put it in the discussion now it is up to him to control it, if we truly want to give a hand.. if he wants to continue to offend with the jelly is ready, etc.
Offend? it seems to me that I'm not offending anyone rather I have given you the exact addresses where to start from and this ? the thanks?
Well!
jealous or not the info we are then, if you the file nice and ready then the question changes.
Exact msport!
street racers
09-12-2013, 17:35
jealous or not the info we are then, if you the file nice and ready then the question changes.
no one has talked about files beautiful and facts, and only second as I think I may be as well that I'm wrong if one asks for a hand, or how you should or nothing, and inutle that make vague.....for less when you asked me, I do so.....and then everyone in the world knows...and anyway, I always thanked all
no one has talked about files beautiful and facts, and only second as I think I may be as well that I'm wrong if one asks for a hand, or how you should or nothing, and inutle that make vague.....for less when you asked me, I do so.....and then everyone in the world knows...and anyway, I always thanked all
The vague? Pi? write the exact address and check the files what's
street racers
09-12-2013, 18:56
Games from 06A12A then you will see for yourself ;)
this what you wrote...... to me it seems a little bit vague ... to me!! then again, everyone sees it in his own way....... I thank you anyway for the interessameno for the love of god!! and just a point of view that's all!
msport (exil77grande)
09-12-2013, 20:57
this what you wrote...... to me it seems a little bit vague ... to me!! then again, everyone sees it in his own way....... I thank you anyway for the interessameno for the love of god!! and just a point of view that's all!
I'm sorry, apart from the help that you gave carbo92 there is only post-ready file that is not the policy of this forum, but help the table and not make the game, there is the most long so for me you're just wrong.
street racers
09-12-2013, 21:40
Ok then I was wrong, I ...
angelus.d87
09-12-2013, 21:50
Offend? it seems to me that I'm not offending anyone rather I have given you the exact addresses where to start from and this ? the thanks?
Well!
Thanks for the exact address and all the help, but you have given, sin ke modifying as you said doesn't work... Thanks anyway
Thanks for the exact address and all the help, but you have given, sin ke modifying as you said doesn't work... Thanks anyway
aside from all the discussions on how to help or not, the problem is just this, that the egr with the suggested change still works, and so the question is there some other change to make? there are some other bits from the tap? thanks to all of you.
angelus.d87
12-12-2013, 10:45
Ugo nn you know nothing as you have well understood
angelus.d87
27-12-2013, 17:40
Ugo have you tried to disconnect the connector to see the error ke d? and erase the dtc from the map?
motorsport
27-12-2013, 17:57
surely if an electrical problem, the problem doesn solve it!!
I'm sorry.. I'm intruding by reading all I'm papie of the pages.. but you never came out the malfunction to the cylinder 2 ?? am I wrong ?
these ecu suffer from this problem..
angelus.d87
27-12-2013, 20:21
But nn and an electrical problem... However the problem ke gave me was xk, I was wrong on the edit.. if you were reading the good you felt
however, on this ecu ? need to remove only the DTC as I understand it, why? the real control is not c'? , right?
updates on the closing of this erg? someone was able to find other addresses, by putting it to zero?
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.